RF expo info

FCC ID: 2AFHW-VH20

RF Exposure Info

Download: PDF
FCCID_4376404

FCC ID: 2AFHW-VH20 FCC 47 CFR MPE REPORT INNOVATIVE TECHNOLOGY ELECTRONICS LLC Bluetooth Speaker Furniture Model Number: VH-35 Additional Model: VH-20, VH-25, VH-40, VH-20XXXX, VH-25XXXX, VH-35XXXX, VH-40XXXX (Where X can be 0-9, A-Z or blank means color of unit) FCC ID: 2AFHW-VH20 Prepared for: INNOVATIVE TECHNOLOGY ELECTRONICS LLC 1 CHANNEL DRIVE,PORT WASHINGTON,New York 11050,United States. Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R1904057 Date of Test: Apr. 02~15, 2019 Date of Report: Apr. 18, 2019 EST Technology Co. ,Ltd Report No. ESTE-R1904057 Page 1 of 3

FCC ID: 2AFHW-VH20 Maximum Permissible Exposure 1、Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a)、Limits for Occupational / Controlled Exposure Frequency Electric Field Magnetic Power Averaging Range (MHz) Strength E) Field Strength Density (S) Times︱E︱ (V/m) (H) (A/m) (mW/cm2) 2 , ︱H︱2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b)、Limits for General Population / Uncontrolled Exposure Frequency Electric Field Magnetic Power Averaging Range (MHz) Strength E) Field Strength Density (S) Times︱E︱ (V/m) (H) (A/m) (mW/cm2) 2 , ︱H︱2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2、MPE Calculation Method E (V/m) = (30*P*G) 0.5/d Power Density: Pd (W/m2) = E2/377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d2) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained EST Technology Co. ,Ltd Report No. ESTE-R1904057 Page 2 of 3

FCC ID: 2AFHW-VH20 3、Conducted Power Result Target Antenna gain Frequency Peak output power Peak output power Mode power (MHz) (dBm) (mW) (dBi) (Linear) （dBm） 2402 1.688 1.475 1±1 0 1 GFSK 2441 3.509 2.243 3±1 0 1 2480 4.152 2.601 4±1 0 1 2402 -0.330 0.927 -1±1 0 1 8-DPSK 2441 1.691 1.476 1±1 0 1 2480 3.086 2.035 3±1 0 1 2402 4.440 2.780 4±1 0 1 BLE 2440 5.390 3.459 5±1 0 1 2480 5.750 3.758 5±1 0 1 4、Calculated Result and Limit Antenna gain Limited Power of Target Density Power Test Mode power (S) Density (dBi) (Linear) Result （dBm） (mW (S) /cm2) (mW /cm2) 2.4G Band GFSK 5 0 1 0.00063 1 Compiles 8-DPSK 4 0 1 0.00050 1 Compiles BLE 6 0 1 0.00079 1 Compiles EST Technology Co. ,Ltd Report No. ESTE-R1904057 Page 3 of 3


Document Created: 2019-07-19 10:10:17
Document Modified: 2019-07-19 10:10:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC