Test Report Part 1

FCC ID: 2AFHW-VBB25

Test Report

Download: PDF
FCCID_4363855

Produkte Products Prüfbericht-Nr.: 50257039 001 Auftrags-Nr.: 170107513 Seite 1 von 25 Test report No.: Order No.: Page 1 of 25 Kunden-Referenz-Nr.: N/A Auftragsdatum: 08.04.2019 Client reference No.: Order date.: Auftraggeber: INNOVATIVE TECHNOLOGY ELECTRONICS LLC Client: 1 CHANNEL DRIVE, PORT WASHINGTON, NY 11050, USA Prüfgegenstand: MINI BLUETOOTH BOOMBOX Test item: Bezeichnung / Typ-Nr.: VBB-25XXXX Identification / Type No.: (XXXX can be 0-9 or A to Z or blank and means unit color or pattern) Auftrags-Inhalt: FCC and IC approval Order content: Prüfgrundlage: CFR47 FCC Part 15: Subpart C Section 15.247 RSS-247 Issue 2 February 2017 Test specification: CFR47 FCC Part 15: Subpart C Section 15.207 RSS-Gen Issue 4 November 2014 CFR47 FCC Part 15: Subpart C Section 15.209 RSS-102 Issue 5 March 2015 CFR47 FCC Part 2: Section 2.1091 Wareneingangsdatum: 08.04.2019 Date of receipt: Prüfmuster-Nr.: A000899019-005 Test sample No.: Prüfzeitraum: Refer to test report Testing period: Please refer to photo documents Ort der Prüfung: TÜV Rheinland (Guangdong) Place of testing: Ltd. Prüflaboratorium: TÜV Rheinland (Guangdong) Testing laboratory: Ltd. Prüfergebnis*: Pass Test result*: geprüft von / tested by: kontrolliert von / reviewed by: 24.06.2019 Amy Wang / Project Manager 24.06.2019 Storm Shu / Technical Certifier Datum Name/Stellung Unterschrift Datum Name/Stellung Unterschrift Date Name/Position Signature Date Name/Position Signature Sonstiges / Other: FCC ID: 2AFHW-VBB25 IC: 9577A-VBB25 HVIN: VBB25 Zustand des Prüfgegenstandes bei Anlieferung: Prüfmuster vollständig und unbeschädigt Condition of the test item at delivery: Test item complete and undamaged: * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhalt P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be V04 duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Guangdong) Ltd. No.199 Kezhu Road, Guangzhou Science City, Guangzhou 510663, Guangdong Province P.R. China http://www.tuv.com

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 2 von 25 Test Report No. Page 2 of 25 Test Summary 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 M AXIMUM PEAK CONDUCTED OUTPUT POWER RESULT: Pass 5.1.3 99% BANDWIDTH RESULT: Pass 5.1.4 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Pass 5.1.5 RADIATED SPURIOUS EMISSION RESULT: Pass 5.1.6 20DB BANDWIDTH RESULT: Pass 5.1.7 CARRIER FREQUENCY SEPARATION RESULT: Pass 5.1.8 NUMBER OF HOPPING FREQUENCY RESULT: Pass 5.1.9 TIME OF OCCUPANCY RESULT: Pass 5.1.10 CONDUCTED EMISSION ON AC M AINS RESULT: Pass 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Pass

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 3 von 25 Test Report No. Page 3 of 25 Contents 1 GENERAL REMARKS ...........................................................................................................................5 1.1 COMPLEMENTARY M ATERIALS ............................................................................................................5 2 TEST SITES ........................................................................................................................................5 2.1 TEST FACILITIES .................................................................................................................................5 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS.................................................................................6 2.3 TRACEABILITY ....................................................................................................................................6 2.4 CALIBRATION .....................................................................................................................................6 2.5 MEASUREMENT UNCERTAINTY.............................................................................................................6 2.6 LOCATION OF ORIGINAL DATA.............................................................................................................6 2.7 STATUS OF FACILITY USED FOR TESTING.............................................................................................7 3 GENERAL PRODUCT INFORMATION ......................................................................................................8 3.1 PRODUCT FUNCTION AND INTENDED USE .............................................................................................8 3.2 RATINGS AND SYSTEM DETAILS ..........................................................................................................8 3.3 INDEPENDENT OPERATION MODES ....................................................................................................10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS .......................................................................10 3.5 SUBMITTED DOCUMENTS...................................................................................................................10 4 TEST SET-UP AND OPERATION MODES ..............................................................................................11 4.1 PRINCIPLE OF CONFIGURATION SELECTION .......................................................................................11 4.2 TEST OPERATION AND TEST SOFTWARE ............................................................................................11 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ..........................................................................11 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ........................................................................11 4.5 TEST SETUP DIAGRAM ......................................................................................................................12 5 TEST RESULTS .................................................................................................................................14 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ....................................................................................14 5.1.1 Antenna Requirement ................................................................................................................14 5.1.2 Maximum Peak Conducted Output Power .................................................................................15 5.1.3 99% Bandwidth ..........................................................................................................................16 5.1.4 Conducted Spurious Emissions Measured in 100 kHz Bandwidth ............................................17 5.1.5 Radiated Spurious Emission ......................................................................................................18 5.1.6 20dB Bandwidth .........................................................................................................................19 5.1.7 Carrier Frequency Separation ....................................................................................................20 5.1.8 Number of Hopping Frequency ..................................................................................................21 5.1.9 Time of Occupancy ....................................................................................................................22 5.1.10 Conducted Emission on AC Mains ........................................................................................23 6 SAFETY HUMAN EXPOSURE ..............................................................................................................24 6.1 RADIO FREQUENCY EXPOSURE COMPLIANCE ....................................................................................24 6.1.1 Electromagnetic Fields ...............................................................................................................24 7 PHOTOGRAPHS OF THE TEST SET-UP ................................................................................................25

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 4 von 25 Test Report No. Page 4 of 25 8 LIST OF TABLES................................................................................................................................25

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 5 von 25 Test Report No. Page 5 of 25 1 General Remarks 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix A: Photographs of the Test Set-up Appendix B: Test Results 2 Test Sites 2.1 Test Facilities TÜV Rheinland (Guangdong) Ltd. No.102, 1F of Southwest and No.205, 2F No.767 Tianyuan Road, Tianhe District, Guangzhou 510663, Guangdong Province P.R. China FCC Accreditation Designation No.: CN1207 Test site Industry Canada No.: 2932C-1

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 6 von 25 Test Report No. Page 6 of 25 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment For the measurement Equipment list, refer to the appendix B. 2.3 Traceability All measurement equipment calibrations are traceable to NIM (National Institute of Metrology) or where calibration is performed in other countries, to equivalent nationally recognized standards organizations. 2.4 Calibration Equipment requiring calibration is calibrated periodically by the manufacturer or according to manufacturer’s specifications. Additionally all equipment is verified for proper performance on a regular basics using in house standards or comparisons. 2.5 Measurement Uncertainty The estimated combined standard uncertainty for radiated emissions and conducted emissions measurements as below table. Item Extended Uncertainty Conducted Emission ± 2.68 dB Radiated Emission (30-1000MHz) Field strength (dBµV/m) ± 5.16 dB Radiated Emission (above 1000MHz) Field strength (dBµV/m) ± 2.22 dB Radio Spectrum ± 4.51 dB 2.6 Location of Original Data The original copies of all test data taken during actual testing were attached at Appendix A & B of this report and delivered to the applicant. A copy has been retained in the TÜV Rheinland (Guangdong) Ltd. file for certification follow-up purposes.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 7 von 25 Test Report No. Page 7 of 25 2.7 Status of Facility Used for Testing The TÜV Rheinland (Guangdong) Ltd. Test facility located at No.102, 1F of Southwest and No.205, 2F No.767 Tianyuan Road, Tianhe District, Guangzhou 510663, Guangdong Province P.R. China is listed on the US Federal Communications Commission list of facilities approved to perform measurements.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 8 von 25 Test Report No. Page 8 of 25 3 General Product Information 3.1 Product Function and Intended Use The EUT is “MINI BLUETOOTH BOOMBOX” for indoor use. The unit supports BT5.0 wireless technologies. Model difference: The models VBB-25XXXX are identical to each other except for model name and unit color or pattern. According to the above information, all applicable tests have been performed on VBB-25. For details refer to the User Manual, Technical Description and Circuit Diagram. 3.2 Ratings and System Details Table 2: Technical Specification of EUT General Information of EUT Value Kind of Equipment MINI BLUETOOTH BOOMBOX Type Designation VBB-25XXXX FCC ID 2AFHW-VBB25 IC 9577A-VBB25 HVIN VBB25 Operating Voltage AC 120V, 60Hz Testing Voltage AC 120V, 60Hz Technical Specification of Bluetooth 5.0 (Single mode) Operating Frequency 2402 - 2480 MHz Type of Modulation GFSK, 8DPSK, π/4DQPSK Channel Number 79 channels Channel Separation 1 MHz Antenna Type Integral Antenna Gain -0.58 dBi Table 3: RF Channel and Frequency of General 2.4GHz RF Frequency RF Frequency RF Frequency RF Frequency Channel (MHz) Channel (MHz) Channel (MHz) Channel (MHz) 0 2402.00 20 2422.00 40 2442.00 60 2462.00 1 2403.00 21 2423.00 41 2443.00 61 2463.00 2 2404.00 22 2424.00 42 2444.00 62 2464.00 3 2405.00 23 2425.00 43 2445.00 63 2465.00 4 2406.00 24 2426.00 44 2446.00 64 2466.00 5 2407.00 25 2427.00 45 2447.00 65 2467.00 6 2408.00 26 2428.00 46 2448.00 66 2468.00

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 9 von 25 Test Report No. Page 9 of 25 7 2409.00 27 2429.00 47 2449.00 67 2469.00 8 2410.00 28 2430.00 48 2450.00 68 2470.00 9 2411.00 29 2431.00 49 2451.00 69 2471.00 10 2412.00 30 2432.00 50 2452.00 70 2472.00 11 2413.00 31 2433.00 51 2453.00 71 2473.00 12 2414.00 32 2434.00 52 2454.00 72 2474.00 13 2415.00 33 2435.00 53 2455.00 73 2475.00 14 2416.00 34 2436.00 54 2456.00 74 2476.00 15 2417.00 35 2437.00 55 2457.00 75 2477.00 16 2418.00 36 2438.00 56 2458.00 76 2478.00 17 2419.00 37 2439.00 57 2459.00 77 2479.00 18 2420.00 38 2440.00 58 2460.00 78 2480.00 19 2421.00 39 2441.00 59 2461.00 / / Test frequencies are lowest channel: 2402 MHz, middle channel: 2441 MHz and highest channel: 2480 MHz. Table 4: Frequency Hopping Information Technical Specification Description Hereby we declare that the frequency range of this device is: 2402-2480MHz. This is according the Bluetooth Core Hopping Range Specification V5.0 (single mode) for devices which will be operated in the USA. This was checked during the Bluetooth Qualification tests (Test Case: TRM/CA/04-E). Example of a 79 hopping sequence in data mode: 33,04,21,44,23,42,53,46,55,48,40,59,72,29,76,31,08,73, Hopping Sequence 07,75,09,45,60,39,58,13,47,11,77,52,35,50,65,54,67,56, 69,62,71,64, 7,25,27,66,57,70,74,61,78,63,10,41,05,43, 15,44,64,68,02,70,06,01,51,03,55,05,03,66,53,49,36,47, The input bandwidth of the receiver is 1MHz. In every connection one Bluetooth device is the master and the other one is the slave. The master determines the hopping sequence. The slave follows this sequence. Both devices shift between RX and TX time slot according to the clock of the master. Additionally the type of connection is set up at the beginning of the connection. The master adapts its hopping frequency and its TX/RX timing according to the packet type of the connection. Receiver input bandwidth Also the slave of the connection will use these settings. Repeating of a packer has no influence on the hopping sequence. The hopping sequence generated by the master of the connection will be followed in any case. That means a repeated packet will not be send on the same frequency, it is send on the next frequency of the hopping sequence.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 10 von 25 Test Report No. Page 10 of 25 3.3 Independent Operation Modes The basic operation modes are: A. On, Traditional Bluetooth 1. Low channel 2. Middle channel 3. High channel B. On, Traditional Bluetooth on Hopping channel C. On, Normal operation mode D. Off 3.4 Noise Generating and Noise Suppressing Parts Refer to Circuit Diagram for further details. 3.5 Submitted Documents - Application Form - Photo Document - Block Diagram - Schematics - FCC/IC Label and Location Info - User Manual - Operation Description

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 11 von 25 Test Report No. Page 11 of 25 4 Test Set-up and Operation Modes 4.1 Principle of Configuration Selection Radio Spectrum: The equipment under test (EUT) was configured at its highest power output in order to measure its highest possible radiation and conducted level. The test modes were adapted accordingly in reference to the instructions for use. Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. 4.2 Test Operation and Test Software Test operation refers to test setup in chapter 5. All tests were performed according to the procedures in ANSI C63.10: 2013. According to clause 3.1, all tests were performed on model VBB-25 in this report. 4.3 Special Accessories and Auxiliary Equipment Table 5: List of Accessories and Auxiliary Equipment Description Manufacturer Model S/N Rating Notebook Lenovo E46A EB24320428 N/A iPhone Apple A1586 / N/A 4.4 Countermeasures to Achieve EMC Compliance The test sample which has been tested contained the noise suppression parts as described in the Technical Construction File (TCF). No additional measures were employed to achieve compliance.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 12 von 25 Test Report No. Page 12 of 25 4.5 Test Setup Diagram Diagram of Measurement Configuration for Radiation Test (Below 1GHz) Diagram of Measurement Configuration for Radiation Test (Above 1GHz)

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 13 von 25 Test Report No. Page 13 of 25 Diagram of Measurement Configuration for Mains Conduction Measurement Diagram of Measurement Configuration for Conducted Transmitter Measurement

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 14 von 25 Test Report No. Page 14 of 25 5 Test Results 5.1 Transmitter Requirement & Test Suites 5.1.1 Antenna Requirement RESULT: Pass Test Specification Test standard : FCC Part 15.247(b)(4) and Part 15.203 According to the manufacturer declared, the EUT has one internal antenna, the directional gain of antenna is -0.58dBi, and the antenna connector is designed with permanent attachment and no consideration of replacement. Therefore the EUT is considered sufficient to comply with the provision. Therefore the EUT is considered sufficient to comply with the provision. Refer to EUT Photo for further details.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 15 von 25 Test Report No. Page 15 of 25 5.1.2 Maximum Peak Conducted Output Power RESULT: Pass Test Specification Test standard : FCC Part 15.247(b)(1)&(3) RSS-247 Clause 5.4(b)&(d) Basic standard : ANSI C63.10: 2013 Limits : FHSS < 0.125 Watts Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : A Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 6: Test Result of Maximum Peak Conducted Output Power Test Channel Measured Peak Power Limit Test Mode (MHz) (dBm) (mW) (W) 2402 -22.19 0.006 BDR 2441 -20.02 0.010 < 0.125 2480 -18.62 0.014 Maximum Measured Value -18.62 0.014 Test Channel Measured Peak Power Limit Test Mode (MHz) (dBm) (mW) (W) 2402 -23.29 0.005 EDR 2441 -19.49 0.011 < 0.125 2480 -18.34 0.015 Maximum Measured Value -18.34 0.015 Note: 1) The cable loss is taken into account in results. 2) Antenna gain(G) of FHSS: -0.58dBi, The Maximum peak conducted output power (e.i.r.p.)=P(Peak power)+ G, which is far below the 4 W

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 16 von 25 Test Report No. Page 16 of 25 5.1.3 99% Bandwidth RESULT: Pass Test Specification Test standard : RSS-Gen Clause 6.6 Basic standard : ANSI C63.10: 2013 Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : A Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 7: Test Result of 99% Bandwidth, General 2.4GHz Test Channel 99% Bandwidth Test Mode Limit (MHz) (MHz) 2402 0.86 BDR 2441 0.85 / 2480 0.85 Maximum Measured Value 0.86 Test Channel 99% Bandwidth Test Mode Limit (MHz) (MHz) 2402 1.19 EDR 2441 1.21 / 2480 1.20 Maximum Measured Value 1.21

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 17 von 25 Test Report No. Page 17 of 25 5.1.4 Conducted Spurious Emissions Measured in 100 kHz Bandwidth RESULT: Pass Test Specification Test standard : FCC Part 15.247(d) RSS-247 Clause 5.5 Basic standard : ANSI C63.10: 2013 Limits : 20dB (below that in the 100kHz bandwidth within the band that contains the highest level of the desired power); In addition, radiated emissions which fall in the restricted bands, must also comply with the radiated emission limits specified in 15.209(a) Kind of test site : Shielded Room Test Setup Date of testing : Refer to test result Input voltage : AC 120V, 60Hz Operation mode : A Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa Test results of 100kHz Bandwidth of Frequency Band Edge by Conducted method refer to test plots, and compliance is achieved as well. For the measurement records, refer to the appendix B.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 18 von 25 Test Report No. Page 18 of 25 5.1.5 Radiated Spurious Emission RESULT: Pass Test Specification Test standard : FCC Part 15.247(d) & FCC Part 15.205 RSS-247 Clause 3.3 Basic standard : ANSI C63.10: 2013 Limits : Refer to 15.209(a) of FCC part 15.247(d) RSS-Gen Issue 4 Table 4 Kind of test site : 3m Semi-anechoic Chamber Test Setup Date of testing : Refer to test result Input voltage : AC 120V, 60Hz Operation mode : A Test channel : Low / Middle / High Ambient temperature : 22 ℃ Relative humidity : 53 % Atmospheric pressure : 101 kPa Remark: Testing was carried out within frequency range 9kHz to the tenth harmonics. Only the worst case spurious emissions configuration of the each mode were reported. For the measurement records, refer to the appendix B.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 19 von 25 Test Report No. Page 19 of 25 5.1.6 20dB Bandwidth RESULT: Pass Test Specification Test standard : FCC Part 15.247(a)(1) RSS-247 Clause 5.1(a) Basic standard : ANSI C63.10: 2013 Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : A Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 8: Test Result of 20dB Bandwidth, General 2.4GHz 20dB 2/3 of 20dB Test Channel Limit Test Mode Bandwidth Bandwidth (MHz) (MHz) (kHz) (kHz) 2402 952.00 634.667 BDR 2441 904.00 602.667 / 2480 952.00 634.667 Maximum Measured Value 952.00 634.667 20dB 2/3 of 20dB Test Channel Limit Test Mode Bandwidth Bandwidth (MHz) (MHz) (kHz) (kHz) 2402 1284.00 856.000 EDR 2441 1312.30 874.867 / 2480 1316.50 877.667 Maximum Measured Value 1316.50 877.667

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 20 von 25 Test Report No. Page 20 of 25 5.1.7 Carrier Frequency Separation RESULT: Pass Test Specification Test standard : FCC Part 15.247(a)(1) RSS-247 Clause 5.1(b) Basic standard : ANSI C63.10: 2013 Limits : ≥ 25kHz or 2/3 of 20dB bandwidth, whichever is greater Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : C Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 9: Test Result of Carrier Frequency Separation, General 2.4GHz Measured Test Channel Channel Limit Test Mode Test Channel (MHz) Separation (kHz) (KHz) Low Channel 2402 Adjacency 1002.0 2403 Channel Middle Channel 2441 ≥ 25kHz or 2/3 FHSS Adjacency 1002.0 of 20dB 2442 Channel bandwidth High Channel 2480 Adjacency 1002.0 2479 Channel Note: The limit is maximum 2/3 of the 20 dB bandwidth: 634.667 KHz.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 21 von 25 Test Report No. Page 21 of 25 5.1.8 Number of Hopping Frequency RESULT: Pass Test Specification Test standard : FCC part 15.247(a)(1)(iii) RSS-247 Clause 5.1(d) Basic standard : ANSI C63.10: 2013 Limits :  15 non-overlapping channels Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : C Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 10: Test Result of Number of Hopping Frequency, General 2.4GHz Measured Quantity of Test Mode Frequency Range Limit Hopping Channel FHSS 2402 - 2480 MHz 79 15

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 22 von 25 Test Report No. Page 22 of 25 5.1.9 Time of Occupancy RESULT: Pass Test Specification Test standard : FCC part 15.247(a)(1)(iii) RSS-247 Clause 5.1(d) Basic standard : ANSI C63.10: 2013 Limits : < 0.4s Kind of test site : Shielded Room Test Setup Date of testing : 25.05.2019 Input voltage : AC 120V, 60Hz Operation mode : B Test channel : Low / Middle / High Ambient temperature : 24 ℃ Relative humidity : 50 % Atmospheric pressure : 101 kPa For details refer to following test result. Table 11: Test Result of Time of Occupancy Test Channel Pulse Number of Measured Limit Test Mode (MHz) Width(ms) Channels Dwell Time(s) (s) 2402 0.336 330 0.111 BDR 2441 0.336 330 0.111 0.4s 2480 0.336 330 0.111 Test Channel Pulse Number of Measured Limit Test Mode (MHz) Width(ms) Channels Dwell Time(s) (s) 2402 2.890 110 0.318 EDR 2441 2.890 110 0.318 0.4s 2480 2.890 110 0.318 Note: Dwell time = Pulse width x Number of channels in Period Period = 0.4 (seconds/ channel) x 79 (channel) = 31.6 seconds

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 23 von 25 Test Report No. Page 23 of 25 5.1.10 Conducted Emission on AC Mains RESULT: Pass Test Specification Test standard : FCC Part 15.207(a) RSS-Gen Clause 8.8 Basic standard : ANSI C63.10: 2013 Frequency range : 0.15 – 30MHz Limits : FCC Part 15.207(a) RSS-Gen Table 3 Kind of test site : Shielded Room Test Setup Date of testing : Refer to test result Input voltage : AC 120V, 60Hz Operation mode : C Earthing : Not connected Ambient temperature : 25 ℃ Relative humidity : 56 % Atmospheric pressure : 101 kPa For the measurement records, refer to the appendix B.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 24 von 25 Test Report No. Page 24 of 25 6 Safety Human Exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2: Section 2.1093 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D01 v06 RSS-102 Issue 5 March 2015 The minimum distance for the EUT is less than 5mm. Since maximum peak output power of the transmitter is 0.015 mW <10 mW. Hence the EUT is excluded from SAR evaluation according to FCC KDB Publication 447498 D01 General RF Exposure Guidance v06. The maximum peak output power of the transmitter is -18.62 dBm (0.015 mW), which is far below the SAR exclusion threshold level 4 mW ≈ 6.02 dBm. Hence the EUT is exempted from routine evaluation limits (SAR Evaluation) according to clause 2.5.1 of RSS-102 Issue 5.

Produkte Products Prüfbericht - Nr.: 50257039 001 Seite 25 von 25 Test Report No. Page 25 of 25 7 Photographs of the Test Set-Up For photographs of the test set-up, refer to the appendix A. 8 List of Tables Table 1: List of Test and Measurement Equipment ..................................................................... 6 Table 2: Technical Specification of EUT ..................................................................................... 8 Table 3: RF Channel and Frequency of General 2.4GHz ........................................................... 8 Table 4: Frequency Hopping Information .................................................................................... 9 Table 5: List of Accessories and Auxiliary Equipment ............................................................... 11 Table 6: Test Result of Maximum Peak Conducted Output Power............................................ 15 Table 7: Test Result of 99% Bandwidth, General 2.4GHz ........................................................ 16 Table 8: Test Result of 20dB Bandwidth, General 2.4GHz ....................................................... 19 Table 9: Test Result of Carrier Frequency Separation, General 2.4GHz................................... 20 Table 10: Test Result of Number of Hopping Frequency, General 2.4GHz ............................... 21 Table 11: Test Result of Time of Occupancy ............................................................................ 22


Document Created: 2019-07-12 10:31:18
Document Modified: 2019-07-12 10:31:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC