User manual

FCC ID: 2AFHW-ITSB105

Users Manual

Download: PDF
FCCID_4433473

2019.07.16 17:16:57 +08'00'

AFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK]. NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. a DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product‘s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION: The exclamation polnt within an equllateral trlangle is Intended to alert the user to the presence of importantoperating and maintenance {servicing} instructionsin the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlt on a circult different from that to which the receiver is connected. * Consult the dealer or an experienced radio / TV technician for help.

2019.07.16 17:17:19 +08'00'

2019.07.16 17:17:24 +08'00'

20. Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 21. Safety check Upon completion of any service or repalrs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22. Wall or celling mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 28. Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnelunderthe following conditions. a) When the power— supply cord or plug is damaged. b) If liquid has been spilled or objects havefalleninto the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. 6) If the product has been dropped or the cabinet has been damaged. ?) When the product exhibits a distinct change in performance— this indicates a need for service. 24. Note to CATV system Installer This reminder is provided to call the CATV system installer‘s attention to Article B20—40 of the NEC that provides guidelines for proper grounding and, in particular, specifies thatthe cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qual when the unit has been damaged in any way such as the following: the power—supply cord or plug has been damaged, liquid has been spilled Into unit, the unlt has been exposed to railn or molsture, the unit has been dropped orthe unit does not operate normally. CALIFORNIA PROP 65 WARNING WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.6GWamings.ca.gov. ES Ey

SPECIFICATIONS AC POWER SOURCE . AC 100—240V~60/50Hz DC POWER SOURCE . 5A ¢€4 POWER CONSUMPTION «... OW BLUETOOTH RANGE . . Up to 10 maters (33 f) AGCESSORIES........................ s sences msemn nes s ns sensen sensen sensen sencen AC Adaptor Instruction Manual Aux—In Cord (2) Screws, (2) Washers Baseplate Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice. Blustooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Made in China. CAUTION: To ensure that the unit is stable, the unit must never be used without the baseplate attached. 1. Lay soft protective cloth on a large table or worl—surface. 2. Lay the unit on the cloth, on its right side, with the base of the unit accessible at the end of the table. 3. Fit a washerto each of the screws. 4. Bring the base plate up to the base of the unit, lining up the holes in the base plate with the base. Towr Stereo Screw in the two screws to a secure the base. Fold down thefinger grips on p the screw heads. Tighten the screws with a Nn screwdriver. The baseplate is now m assembled to the unit. | Carefully lift the unit off the table and stand it on its base.

2019.0 7.16 17:17:3 5 +08'00'

2019.0 7.16 17:17:3 8 +08'00'

2019.07. 16 17:17:41 +08'00'

WARRANTY Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. ([T) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". it is further agreed that IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear—pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST presont an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection ([T) may issue a replacement to customerfor the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer "Must" Includefull name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please Include your check or money order in the amount of: * USD $5.00 for items $10.00 to $39.99. (Price Paid Per Unit} + USD $10.00 for Items $40,00 to $99.99. (Price Pald Per UnH) * USD $16.00 for items $100.00 and up. (Price Paid Por Unit) * Shipping fees are non—refundable to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed clalms resulting from a purchaser‘s failure to provide any / all of the necessary information. Send all inquiries or ARMA request via our website www.victrola.com/pages/technical—support. Innovative Technology Electronics LLC. 1 Channel Drive Port Washington, NY 11050 Toll free: 1—877—483—2497 Website for support: www.victrola.com/pages/technical—support There are no express warranties except as listed above, REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY Is THE EXCLUSIVE REMEDY OF THE CUSTOMER, (T) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.


Document Created: 2019-09-05 17:41:44
Document Modified: 2019-09-05 17:41:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC