Test Report

FCC ID: 2AFG2-P1

Test Report

Download: PDF
FCCID_2832351

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No:CCIS15100082401 1 Cover Page FCC REPORT (WIFI) Applicant: Vimtag Technology Co., Ltd 6F.West, 1st Building, Innovative Industrial Park, Nanshan Address of Applicant: Cloud Valley, No.1183, Liuxian Avenue, Nanshan District, SZ, CN. Equipment Under Test (EUT) Product Name: Cloud Camera P1, P1-S, P1-X, P1-C, P2, P2-S, P2-X, P2C, P3, P3-S, P3-X, Model No.: P3-C, P4, P4-S, P4-X, P2-C, P5, P5-S, P5-X, P5-C Trade mark: Vimtag FCC ID: 2AFG2-P1 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 29 Oct., 2015 Date of Test: 29 Oct., to 02 Dec., 2015 Date of report issued: 03 Dec., 2015 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of theCCISproduct certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery orfalsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

Report No:CCIS15100082401 2 Version Version No. Date Description 00 03 Dec., 2015 Original Tested by: Date: 03 Dec., 2015 Test Engineer Reviewed by: Date: 03 Dec., 2015 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 48

Report No: CCIS15100082401 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 5.3 TEST ENVIRONMENT ANDMODE ............................................................................................................................. 7 5.4 LABORATORY FACILITY.......................................................................................................................................... 7 5.5 LABORATORY LOCATION ....................................................................................................................................... 7 5.6 TEST INSTRUMENTS LIST ....................................................................................................................................... 8 6 TEST RESULTS ANDMEASUREMENT DATA ................................................................................................. 9 6.1 ANTENNA REQUIREMENT: ...................................................................................................................................... 9 6.2 CONDUCTED EMISSION ....................................................................................................................................... 10 6.3 CONDUCTED OUTPUT POWER ............................................................................................................................ 13 6.4 OCCUPY BANDWIDTH .......................................................................................................................................... 15 6.5 POWER SPECTRAL DENSITY ............................................................................................................................... 18 6.6 BAND EDGE ......................................................................................................................................................... 20 6.6.1 Conducted Emission Method...................................................................................................................... 20 6.6.2 Radiated Emission Method ......................................................................................................................... 22 6.7 SPURIOUS EMISSION ........................................................................................................................................... 27 6.7.1 Conducted Emission Method...................................................................................................................... 27 6.7.2 Radiated Emission Method ......................................................................................................................... 30 7 TEST SETUP PHOTO ........................................................................................................................................ 35 8 EUT CONSTRUCTIONAL DETAILS ................................................................................................................ 37 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 48

Report No: CCIS15100082401 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203/15.247 (c) Pass AC Power Line Conducted Emission 15.207 Pass Conducted Peak Output Power 15.247 (b)(3) Pass 6dB Emission Bandwidth 15.247 (a)(2) Pass 99% Occupied Bandwidth Power Spectral Density 15.247 (e) Pass Band Edge 15.247(d) Pass Spurious Emission 15.205/15.209 Pass Pass: The EUT complies with the essential requirements in the standard. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 48

Report No: CCIS15100082401 5 General Information 5.1 Client Information Applicant: Vimtag Technology Co., Ltd Address of Applicant: 6F.West,1st Building,Innovative Industrial Park,Nanshan Cloud Valley, No.1183, Liuxian Avenue, Nanshan District, SZ, CN. Manufacturer/ Factory: Vimtag Technology Co., Ltd Address of Manufacturer/ 6F.West,1st Building, Innovative Industrial Park, Nanshan Cloud Factory: Valley, No.1183, Liuxian Avenue, Nanshan District, SZ, CN. 5.2 General Description of E.U.T. Product Name: Cloud Camera P1, P1-S, P1-X, P1-C, P2, P2-S, P2-X, P2C, P3, P3-S, P3-X, P3-C, Model No.: P4, P4-S, P4-X, P2-C, P5, P5-S, P5-X, P5-C Operation Frequency: 2412MHz~2462MHz (802.11b) Channel numbers: 11 for 802.11b Channel separation: 5MHz Modulation technology: Direct Sequence Spread Spectrum (DSSS) (IEEE 802.11b) Modulation technology: Not supported (IEEE 802.11g/802.11n) Data speed (IEEE 802.11b): 1Mbps, 2Mbps, 5.5Mbps, 11Mbps Data speed (IEEE 802.11g): Not supported Data speed (IEEE 802.11n): Not supported Antenna Type: Internal Antenna Antenna gain: 2.5dBi Model: FJ-SW7260502000UU AC adapter: Input:100-240V AC,50/60Hz 0.4A Output:5V DC MAX 2000mA Remark: Model No.: P1, P1-S, P1-X, P1-C, P2, P2-S, P2-X, P2C, P3, P3-S, P3- X, P3-C, P4, P4-S, P4-X, P2-C, P5, P5-S, P5-X, P5-C, are electrically identical , only model no is different . Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 48

Report No: CCIS15100082401 Operation Frequency each of channel For 802.11b Channel Frequency Channel Frequency Channel Frequency Channel Frequency 1 2412MHz 4 2427MHz 7 2442MHz 10 2457MHz 2 2417MHz 5 2432MHz 8 2447MHz 11 2462MHz 3 2422MHz 6 2437MHz 9 2452MHz Note: In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: 802.11b Channel Frequency The lowest channel 2412MHz The middle channel 2437MHz The Highest channel 2462MHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 48

Report No: CCIS15100082401 5.3 Test environment andmode Operating Environment: Temperature: 24.0 C Humidity: 54 % RH Atmospheric Pressure: 1010 mbar Test mode: Operation mode Keep the EUT in continuous transmitting with modulation The sample was placed 0.8m above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. We have verified the construction and function in typical operation. All the test modes were carried out with the EUT in transmitting operation, which was shown in this test report and defined as follows: Per-scan all kind of data rate in lowest channel, and found the follow list which it was worst case. Mode Data rate 802.11b 1Mbps Final Test Mode: According to ANSI C63.4 standards, the test results are both the “worst case” and “worst setup”1Mbps.Duty cycle setting during the transmission is100% with maximum power setting for all modulations. 5.4 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 817957 Shenzhen Zhongjian Nanfang Testing Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in out files. Registration 817957, February 27, 2012. ● IC - Registration No.: 10106A-1 The 3m Semi-anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1. ● CNAS - Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. 5.5 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282 Fax: +86-755-23116366 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 48

Report No: CCIS15100082401 5.6 Test Instruments list Radiated Emission: Inventory Cal. Date Cal. Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 3m SAC SAEMC 9(L)*6(W)* 6(H) CCIS0001 08-23-2014 08-22-2017 2 BiConiLog Antenna SCHWARZBECK VULB9163 CCIS0005 03-28-2015 03-28-2016 3 Horn Antenna SCHWARZBECK BBHA9120D CCIS0006 03-28-2015 03-28-2016 Pre-amplifier 4 HP 8447D CCIS0003 04-01-2015 03-31-2016 (10kHz-1.3GHz) Pre-amplifier Compliance Direction 5 PAP-1G18 CCIS0011 04-01-2015 03-31-2016 (1GHz-18GHz) Systems Inc. Pre-amplifier AFS33-18002 6 Rohde & Schwarz GTS218 04-01-2015 03-31-2016 (18-26GHz) 650-30-8P-44 7 Horn Antenna ETS-LINDGREN 3160 GTS217 04-01-2015 03-31-2016 Spectrum analyzer 8 Rohde & Schwarz FSP30 CCIS0023 03-28-2015 03-28-2016 9k-30GHz 9 EMI Test Receiver Rohde & Schwarz ESRP7 CCIS0167 03-28-2015 03-28-2016 10 Loop antenna Laplace instrument RF300 EMC0701 04-01-2015 03-31-2016 Conducted Emission: Inventory Cal. Date Cal. Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 Shielding Room ZhongShuo Electron 11.0(L)x4.0(W)x3.0(H) CCIS0061 11-10-2013 11-09-2016 2 EMI Test Receiver Rohde & Schwarz ESCI CCIS0002 03-28-2015 03-28-2016 3 LISN CHASE MN2050D CCIS0074 03-28-2015 03-28-2016 4 Coaxial Cable CCIS N/A CCIS0086 04-01-2015 03-31-2016 5 EMI Test Software AUDIX E3 N/A N/A N/A Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 48

Report No: CCIS15100082401 6 Test results andMeasurement Data 6.1 Antenna requirement: Standard requirement: FCC Part15 C Section 15.203 /247(c) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(c) (1)(i) requirement: (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively forfixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBiprovided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3dB that the directional gain of the antenna exceeds 6dBi. E.U.T Antenna: The WiFiantenna is an internal antenna which cannot replace by end-user, the best case gain of the antenna is 2.5 dBi. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 48

Report No: CCIS15100082401 6.2 Conducted Emission Test Requirement: FCC Part15 C Section 15.207 Test Method: ANSI C63.4: 2009 TestFrequencyRange: 150kHz to 30MHz Class / Severity: Class B Class B Receiver setup: RBW=9kHz, VBW=30kHz Limit: Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. Test procedure 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.), whichprovides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4: 2009 on conducted measurement. Test setup: Test Uncertainty: ±3.28 dB Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 48

UuUI® Level (dBuV) 80 70 FCC PART15 B OP °°\ FCC PART15B AV 50 11 40 30 w 10 0.150.2 0.5 1 2 10 20 30 Hace: & Frequency (MHz) Site : CCIS Shielding Room Condition : FCC PARTIS B QP LISN NEUTR&AL EUT : Cloud Camera Model 181 Test Mode : Vifi mode Power Rating : AC 120¥/60Hz Environment : Temp: 23 °C Huni:56% Atmos:101KPa Test Engineer: Viki Remark f Read LISN Cable Limit Over Freq Level Factor Loss Level Line Linit Remark MHz dBu¥ dB db dBu¥ dBu¥ dB 1 0.198 28.75 0.25 10.76 39.76 63.71 —23.95 QP 2 0.479 18.93 0.28 10.75 29.96 46.36 —16.40 Average 8 0.529 30.75 0.27 10.76 41.78 56.00 —14.22 QP 4 0.535 26.89 0.27 10.76 37.92 46.00 —8.08 Average 5 0.558 31.43 0.25 10.77 42.45 56.00 —13.55 QP 6 0.558 27.84 0.25 10.77 38.86 46.00 —7.14 Average T .708 25.60 0.18 10.77 36.55 56.00 —19.45 qP 8 0.844 17.55 0.20 10.82 28.57 46.00 —17.43 Average 9 1.544 14.69 0.26 10.93 25.88 46.00 —20.12 Average 10 4.598 29.06 0.28 10.86 40.20 56.00 —15.80 QP 11 6.121 34.30 0.27 10.82 45.39 60.00 —14.61 9P 12 6.121 16.76 0.27 10.82 27.85 50.00 —22.15 Average

Report No: CCIS15100082401 Line: Notes: 1. An initial pre-scan was performed on the live and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peakemission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 48

Report No: CCIS15100082401 6.3 Conducted Output Power Test Requirement: FCC Part15 C Section 15.247 (b)(3) Test Method: ANSI C63.10:2009 and KDB558074v03r03 section 9.2.2 Limit: 30dBm Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data Maximum Conducted Output Power (dBm) Test CH Limit(dBm) Result 802.11b Lowest 11.49 Middle 11.21 30.00 Pass Highest 10.94 Test plot as follows: Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 48

CCIS Report No: CCIS15100082401 Test mode:802.11b + eew 1 mite markee 10(1 ] & vew 3 mite 2.34 asm Res 30.5 dam »Ats 40 as swt 2.5 ms 2.410580000 onz ~so Center 2.412 one a mite/ Span: 40 mite Tx Channel sandwidth 20 sns Bower i1.49 dsn Lowest channel «Rew 2 rare Marker 1. [T% ) avaw o rite 2.04 asm Res 30.5 dBm aAgs 40 aB SHT 2.5 ms 2.435e80000 onz avi sor Center 2.437 oxe a mire/ Span 40 mie Tx Channel Bandwi d th 20 mxe Power 11.21 cBm Middle channel « rew 1 uite Harker 1 [T1 ) « vew 3 uie 1.85 don Ree 30.5 dsn «Ars 40 ds swt 2.5 as 2.459920000 onz Center 2.462 one d vite/ Span: 40 wie Tx Channel Bandui dth 20 sns Bower 10.94 dsn Highest channel Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 48

Report No: CCIS15100082401 6.4 Occupy Bandwidth Test Requirement: FCC Part15 C Section 15.247 (a)(2) Test Method: ANSI C63.10:2009 and KDB558074v03r03 section 8.1 Limit: >500kHz Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data 6dB Emission Bandwidth (MHz) Test CH Limit(kHz) Result 802.11b Lowest 10.24 Middle 12.24 >500 Pass Highest 10.24 99%Occupy Bandwidth (MHz) Test CH Limit(kHz) Result 802.11b Lowest 15.04 Middle 15.04 N/A N/A Highest 15.04 Test plot as follows: Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 48

CCIS Report No: CCIS15100082401 6dB EBW Test mode: 802.11b oares S urov.zors ossisi20 Lowest channel ®u.< ma a~ oares Saev.zos. onone Middle channel ® ho ara an nanes saow.onis ngsomsis Highest channel Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 48

Report No: CCIS15100082401 99% OBW Test mode: 802.11b * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz 0.50 dBm Ref 30.5 dBm * Att 40 dB SWT 5 ms 2.414000000 GHz 30 Offset 0.5 dB OBW 15.040000000 MHz Temp 1 [T1 OBW] -11.75 dBm A 20 2.404480000 GHz 1 PK Temp 2 [T1 OBW] MAXH 10 -11.22 dBm LVL 2.419520000 GHz 1 0 T1 T2 -10 -20 3DB -30 -40 -50 -60 Center 2.412 GHz 4 MHz/ Span 40 MHz Date: 5.NOV.2015 03:13:52 Lowest channel * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz -1.01 dBm Ref 30.5 dBm * Att 40 dB SWT 5 ms 2.435960000 GHz 30 Offset 0.5 dB OBW 15.040000000 MHz Temp 1 [T1 OBW] -14.69 dBm A 20 2.429480000 GHz 1 PK Temp 2 [T1 OBW] MAXH 10 -12.37 dBm LVL 2.444520000 GHz 1 0 -10 T2 T1 -20 3DB -30 -40 -50 -60 Center 2.437 GHz 4 MHz/ Span 40 MHz Date: 5.NOV.2015 03:11:10 Middle channel * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz -0.77 dBm Ref 30.5 dBm * Att 40 dB SWT 5 ms 2.462960000 GHz 30 Offset 0.5 dB OBW 15.040000000 MHz Temp 1 [T1 OBW] -14.67 dBm A 20 2.454400000 GHz 1 PK Temp 2 [T1 OBW] MAXH 10 -13.89 dBm LVL 2.469440000 GHz 1 0 -10 T2 T1 -20 3DB -30 -40 -50 -60 Center 2.462 GHz 4 MHz/ Span 40 MHz Date: 5.NOV.2015 03:09:27 Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 48

Report No: CCIS15100082401 6.5 Power Spectral Density Test Requirement: FCC Part15 C Section 15.247 (e) Test Method: ANSI C63.10:2009 and KDB558074v03r03 section 10.2 Limit: 8dBm Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data Power Spectral Density (dBm) Test CH Limit(dBm) Result 802.11b Lowest 0.40 Middle 0.30 8.00 Pass Highest 0.10 Test plot as follows: Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 48

CCIS Report No: CCIS15100082401 Test mode: 802.11b nanes s wow.onis msnzoze Lowest channel nanes s wow.onis mnsnsser Middle channel oares S .nov.zors o3:08:05 Highest channel Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 48

Report No: CCIS15100082401 6.6 Band Edge 6.6.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2009 and KDB558074v03r03 section 13 Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 30 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Test plot as follows: Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 48

Report No: CCIS15100082401 802.11b % «hew boo wwz masses i iri i «vew s00 n —a2.es osn ree a0.s sen sars to os swt as e 2.322500000. onz 1 stace 2.31 ons taca m 7 step 2622 onz Dabe: 27.N0v.2015 22:56:43 Lowest channel % «mew noo wre maesee i iri i «vew s00 n —as.27 o8« ree a0.s sen sars to os sut s ns rc4212s«000. onz stace 22457 on «240 mee / stop 2.3 ane Dabe: 5.N0V. 2015 07:57:18 Highest channel Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 48

Report No: CCIS15100082401 6.6.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10: 2009and KDB 558074v03r03 section 12.1 TestFrequencyRange: 2.3GHz to 2.5GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 54.00 Average Value Above 1GHz 74.00 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the groundat a 3 meter camber. The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi- peak or average method as specified andthen reported in a data sheet. Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 48

Report No: CCIS15100082401 802.11b Test channel:Lowest Horizontal: Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 48

Report No: CCIS15100082401 Vertical: Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 48

Report No: CCIS15100082401 Test channel:Highest Horizontal: Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 48

Report No: CCIS15100082401 Vertical: Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 48

Report No: CCIS15100082401 6.7 Spurious Emission 6.7.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2009 and KDB558074 section 11 Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Test plot as follows: Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 48

c c I s Report No: CCIS15100082401 Test mode: 802.11b Lowest channel sxew aoo k maswen i (ri a svew 300 es ca9c60 «en ret as san saze s0 on sur aus s 13.sea420000 onz erifecong on ~ro —eo stace 30 e ce step 2s on Date: s.%0v.2n15 narrainn SOMHz~25GHz Middle channel «hew aoo k maswen i tri a svew 300 es —a9u70 «en ret as san saze s0 on sur aus s 13. ri3s¢0000 onz stace 30 mne zce stop 25 on Dates s.N0v.2n15 nar21:45 SOMHz~25GHz Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 48

CCIS Report No: CCIS15100082401 Highest channel % sasw 100 e svew 300 es —39.00 can ret as san caze 30 ce sur aus s tisss0000 onz stace 30 e ce step 2s on hates s .N0v.2n18 nasaaina SOMHz~25GHz Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 29 of 48

Report No: CCIS15100082401 6.7.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10:2009 TestFrequencyRange: 9kHz to 25GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark 30MHz-1GHz Quasi-peak 120KHz 300KHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 30MHz-88MHz 40.0 Quasi-peak Value 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the groundat a 3 meter chamber.The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi- peak or average method as specified andthen reported in a data sheet. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 30 of 48

Report No: CCIS15100082401 Test setup: Below 1GHz Above 1GHz Test Uncertainty: ±4.88 dB Test Instruments: Refer to section 5.6for details Test mode: Refer to section 5.3 for details Test results: Passed Remark: 1. Pre-scan all kind of the place mode (X-axis, Y-axis, Z-axis), and found the Y-axis is the worst case. 2. 9 kHz to 30MHz is too low, so only shows the data of above 30MHz in this report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 31 of 48

c c I s Report No: CCIS15100082401 Below 1GHz Horizontal: 80Level (dBuVim) 70 60 FCC PART1S CLASS$ B 50 ulg———+——4—a 2 40 Lf~ifected—sit 30 20 10 30 50 100 200 500 1000 Frequency (MHz) Site : Im chamber Condition : FCC PARTIG CLASS B 3m VULB9163(30M1G) HORIZONTAL EUT : Cloud Camera Model B4 Test mode : WIFI Mode Power Rating : AC 120¥/60Hz Environment —: Temp:25.5°C Huni:§5% Test Engineer: Viki Remark f Read&ntenna Cable Preamp Limit Over Freq Level Factor Loss Factor Level Line Limit Remark MHz dBu¥ dB/n dB dB dBu¥/m dBu¥/m dB 1 174.424 59.53 9.29 1.35 29.02 41.15 43.50 —2.35 QP 2 297.224 52.35 13.00 1.76 28.46 38.65 46.00 —7.35 QP $ 324.456 50.72 13.53 1.86 28.51 37.60 46.00 —8.40 QP 4 451.1356 §3.68 16.58 2.26 28.87 42.65 46.00 —3.35 QP 5 §50.948 §1.91 17.57 2.54 29.10 42.92 46.00 —3.08 QP 6 651.942 48.05 18.65 2.80 28.77 40.73 46.00 —5.27 QP Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 32 of 48

c c I s Report No: CCIS15100082401 Vertical: Level (dBuVim) 80 70 60 FCC PART1S CLASS$ B 30 50 100 200 500 1000 Frequency (MHz) Site : Im chamber Condition : FCC PARTIS CLASS B 3m VULB9163(30M1G) VERTICAL EUT : Cloud Camera Model i F1 Test mode : VIFI Mode Power Rating : AC 1209/60Hz Environment : Temp:25.5°C Huni:55% Test Engineer: Viki Remark f Read&ntenna Cable Preamp Limit Over Freq Level Factor Loss Factor Level Line Limit Remark NHz dBu¥ dB/m dB dB dBu¥/m dBu¥/m dB 1 61.995 50.71 11.90 0.71 29.77 33.55 40.00 —6.45 QP 2 119.856 51.50 10.48 1.12 29.39 33.71 43.50 —9.79 QP 3 211.527 §6.53 10.93 i.44 28.76 39.14 43.50 —4.36 QP 4 249.425 51.59 12.07 1.62 28.54 36.74 46.00 —9.26 QP 5 426.521 49.26 15.50 2.19 28.83 38.12 46.00 —7.88 qP 6 480.528 44.97 16.07 2.35 28.92 34.47 46.00 —11.53 QP Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 33 of 48

Report No: CCIS15100082401 Above 1GHz Test mode: 802.11b Test channel: Lowest Remark: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4824.00 49.51 31.54 10.58 40.22 51.41 74.00 -22.59 Vertical 4824.00 49.23 31.54 10.58 40.22 51.13 74.00 -22.87 Horizontal Test mode: 802.11b Test channel: Lowest Remark: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4824.00 44.42 31.54 10.58 40.22 46.32 54.00 -7.68 Vertical 4824.00 44.71 31.54 10.58 40.22 46.61 54.00 -7.39 Horizontal Test mode: 802.11b Test channel: Middle Remark: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4874.00 49.68 31.57 10.64 40.15 51.74 74.00 -22.26 Vertical 4874.00 48.68 31.57 10.64 40.15 50.74 74.00 -23.26 Horizontal Test mode: 802.11b Test channel: Middle Remark: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4874.00 46.04 31.57 10.64 40.15 48.10 54.00 -5.90 Vertical 4874.00 45.19 31.57 10.64 40.15 47.25 54.00 -6.75 Horizontal Test mode: 802.11b Test channel: Highest Remark: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4924.00 49.64 31.61 10.70 40.08 51.87 74.00 -22.13 Vertical 4924.00 49.68 31.61 10.70 40.08 51.91 74.00 -22.09 Horizontal Test mode: 802.11b Test channel: Highest Remark: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polar. (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4924.00 44.36 31.61 10.70 40.08 46.59 54.00 -7.41 Vertical 4924.00 44.88 31.61 10.70 40.08 47.11 54.00 -6.89 Horizontal Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.:CCIS151000824RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 34 of 48


Document Created: 2015-12-03 15:14:43
Document Modified: 2015-12-03 15:14:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC