RF Exposure

FCC ID: 2AFG2-CM1

RF Exposure Info

Download: PDF
FCCID_2867969

Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Frequency range Electric field strength Magnetic field strength Power density Averaging time 2 (MHz) (V/m) (A/m) (mW/cm ) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 2 3.0–30 1842/f 4.89/f *(900/f ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 2 1.34–30 824/f 2.19/f *(180/f ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna

3. Result Limits for Maximum Maximum General Antenna Antenna Frequency Output Output Distance Result Population/ Gain Gain 2 (MHz) power power (cm) (mW/cm ) Uncontrolled (dBi) (numeric) (dBm) (mW) Exposure 2 (mW/cm ) 802.11b 2437 16.15 41.21 40.21 2.5 1.78 20.00 0.0146 0.01425 1 Note: Just the worst case mode was shown in report.


Document Created: 2016-01-05 14:32:11
Document Modified: 2016-01-05 14:32:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC