RF Exposure Info (MPE) rev

FCC ID: 2AFDI-ITCOQ835S

RF Exposure Info

Download: PDF
FCCID_4499080

RF Exposure Report Report No.: SA190610E05 FCC ID: 2AFDI-ITCOQ835S Test Model: Open-Q 835 μSOM Received Date: June 10, 2019 Test Date: Sep. 10, 2019 Issued Date: Oct. 14, 2019 Applicant: Intrinsyc Technologies Corporation Address: 885 Dunsmuir Street #300 Vancouver BC V6C 1N5 Canada Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA190610E05 Page No. 1 / 6 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: SA190610E05 Page No. 2 / 6 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA190610E05 Original release. Oct. 14, 2019 Report No.: SA190610E05 Page No. 3 / 6 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Intrinsyc Open-Q 835 uSOM Brand: Intrinsyc Technologies Corporation Test Model: Open-Q 835 μSOM Sample Status: ENGINEERING SAMPLE Applicant: Intrinsyc Technologies Corporation Test Date: Sep. 10, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3-2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 14, 2019 Claire Kuan / Specialist Approved by : , Date: Oct. 14, 2019 Clark Lin / Technical Manager Report No.: SA190610E05 Page No. 4 / 6 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna Frequency Cable Antenna Connector No. Chain Brand Model Net range Length Type Type Gain(dBi) (GHz) (mm) 3.32 2.4 ~ 2.5 Dipole 1 Chain0 Taoglas FXP830.07.0100C Ipex MHF 100 6.11 4.9 ~ 5.8 Antenna 3.32 2.4 ~ 2.5 Dipole 2 Chain2 Taoglas FXP830.07.0100C Ipex MHF 100 6.11 4.9 ~ 5.8 Antenna Report No.: SA190610E05 Page No. 5 / 6 Report Format Version: 6.1.1

2.5 Calculation Result of Maximum Conducted Power Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency Mode (mW) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) WLAN 2.4GHz 2437 618.782 6.33 20 0.52877 1 WLAN 5GHz 5230 48.648 9.12 20 0.07903 1 (U-NII-1) WLAN 5GHz 5320 118.757 9.12 20 0.19292 1 (U-NII-2A) WLAN 5GHz 5500 119.509 9.12 20 0.19415 1 (U-NII-2C) WLAN 5GHz 5825 124.319 9.12 20 0.20196 1 (U-NII-3) Bluetooth 2480 16.749 3.32 20 0.00716 1 (BT-EDR) Bluetooth 2402 2.761 3.32 20 0.00118 1 (BT-LE) NOTE: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. 2.4GHz: Directional gain = 3.32dBi + 10log(2) = 6.33dBi 5GHz: Directional gain = 6.11dBi + 10log(2) = 9.12dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + Bluetooth = 0.52877 / 1 + 0.00716 / 1 = 0.53593 WLAN 5GHz + Bluetooth = 0.20196 / 1 + 0.00716 / 1 = 0.20912 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA190610E05 Page No. 6 / 6 Report Format Version: 6.1.1


Document Created: 2019-10-28 11:35:18
Document Modified: 2019-10-28 11:35:18
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC