Test Report_DFS

FCC ID: 2AF9RHILTONV1

Test Report

Download: PDF
FCCID_4018892

Access to the World FCC 47 CFR PART 15 SUBPART E DFS TEST REPORT For OTT BOX MODEL No.: Hilton V1 FCC ID: 2AF9RHILTONV1 Trade Mark: N/A REPORT NO: ES180829037W06 ISSUE DATE: September 20, 2018 Prepared for Wetek Electronics Limited. Level 10, Central building, 1-3 Pedder Street, Central, Hong Kong Prepared by EMTEK(SHENZHEN) CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TTRF No.: FCC 15.407/A Page 1 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION .........................................................................3 2. EUT DESCRIPTION..............................................................................................4 3. SUMMARY OF TEST RESULT ............................................................................5 4. TEST METHODOLOGY........................................................................................6 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................6 4.2 MEASUREMENT EQUIPMENT USED ......................................................................6 4.3 DESCRIPTION OF TEST MODES ...........................................................................7 5. FACILITIES AND ACCREDITATIONS .................................................................9 5.1 FACILITIES .......................................................................................................9 5.2 EQUIPMENT .....................................................................................................9 5.3 LABORATORY ACCREDITATIONS AND LISTINGS .....................................................9 6. SETUP OF EQUIPMENT UNDER TEST ............................................................10 6.1 SETUP CONFIGURATION OF EUT .......................................................................10 6.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ......................10 6.3 SUPPORT EQUIPMENT .....................................................................................11 7. DYNAMIC FREQUENCY SELECTION REQUIREMENTS .................................12 7.1 APPLICABLE STANDARD ..................................................................................12 7.2 CONFORMANCE LIMIT .....................................................................................12 7.3 TEST CONFIGURATION ....................................................................................12 7.4 TEST PARAMETERS OF DFS TEST SIGNAL.........................................................13 7.5 TRANSMITTER OUTPUT POWER ........................................................................14 7.6 OPERATION MODES AND REQUIREMENT TEST ITEMS ..........................................15 7.7 TEST PROCEDURE ..........................................................................................15 8. TEST RESULT....................................................................................................16 8.1 DETAILED TEST RESULTS ........................................................................16 8.2 RADAR WAVEFORM ........................................................................................17 8.3 IN-SERVICE MONITORING ................................................................................19 TTRF No.: FCC 15.407/A Page 2 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 1. TEST RESULT CERTIFICATION Applicant : Wetek Electronics Limited. Address： Level 10, Central building, 1-3 Pedder Street, Central, Hong Kong Manufacturer : Wetek Electronics Limited. Address： Level 10, Central building, 1-3 Pedder Street, Central, Hong Kong EUT : OTT BOX Model Name : Hilton V1 Trademark : N/A Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2, Subpart J PASS FCC 47 CFR Part 15, Subpart E The above equipment was tested by EMTEK (SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.407. The test results of this report relate only to the tested sample identified in this report. Date of Test : August 30,2018 to September 18, 2018 Prepared by : Sewen Guo /Editor Reviewer : Sevin Li/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TTRF No.: FCC 15.407/A Page 3 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 2. EUT DESCRIPTION Characteristics Description Product OTT BOX Model Number Hilton V1 UNII-1: 5150MHz-5250MHz Band UNII-2A: with 5250MHz-5350MHz Band Wifi Type UNII-2C: with 5470MHz-5725MHz Band UNII-3 with 5725MHz-5850MHz Band 802.11a 802.11n(20MHz channel bandwidth) 802.11n(40MHz channel bandwidth) WLAN Supported 802.11ac(20MHz channel bandwidth) 802.11ac(40MHz channel bandwidth) 802.11ac(80MHz channel bandwidth) 802.11a:54/48/36/24/18/12/9/6Mbps Data Rate 802.11n:up to 600 Mbps 802.11ac:up to 1.733Gbps OFDM with BPSK/QPSK/16QAM/64QAM for 802.11a/n; Modulation OFDM with BPSK/QPSK/16QAM/64QAM/256QAM for 802.11ac; UNII-2A: with 5250MHz-5350MHz Band 5260-5320MHz for 802.11a; 5270-5310MHz for 802.11n(HT40); 5260-5320MHz for 802.11n(HT20); 5270-5310MHz for 802.11ac(VHT40); 5260-5320MHz for 802.11ac(VHT20); 5290MHz for 802.11ac(VHT80); Frequency Range UNII-2C: with 5470MHz-5725MHz Band 5500-5700MHz for 802.11a; 5510-5670MHz for 802.11n(HT40); 5500-5700MHz for 802.11n(HT20); 5510-5670MHz for 802.11ac(VHT40); 5500-5700MHz for 802.11ac(VHT20); 5530-5610MHz for 802.11ac(VHT80) TCP Function Applicable Not Applicable Antenna Type External Antenna Antenna Gain 2 dBi device was functioned Master Slave device Note: for more details, please refer to the User’s manual of the EUT. TTRF No.: FCC 15.407/A Page 4 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 3. SUMMARY OF TEST RESULT Clause Test Parameter Remarks Pass/Fail 15.407 DFS Detection Threshold N/A N/A 15.407 Channel Availability Check Time N/A N/A 15.407 Channel Move Time Applicable Pass 15.407 Channel Closing Transmission Time Applicable Pass 15.407 Non- Occupancy Period N/A N/A 15.407 Uniform Spreading N/A N/A 15.407 U-NII Detection Bandwidth N/A N/A TTRF No.: FCC 15.407/A Page 5 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 4. TEST METHODOLOGY 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS According to its specifications, the EUT must comply with the requirements of the following standards: FCC 06-96 FCC 47 CFR Parts 15, Subpart E FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 4.2 MEASUREMENT EQUIPMENT USED EQUIPMENT MFR MODEL SERIAL LAST Due Cal. TYPE NUMBER NUMBER CAL. Vector Signal Generater Agilent N5182B My53050553 05/20/2018 05/19/2019 Analog Signal Generator Agilent N5171B My53050878 05/20/2018 05/19/2019 Signal Analyzer Agilent N9010A My53470879 05/20/2018 05/19/2019 Power Analyzer Agilent PS-X10-100 N/A 05/20/2018 05/19/2019 Test Accessories Agilent PS-X10-100 N/A 05/20/2018 05/19/2019 Remark: Each piece of equipment is scheduled for calibration once a year. TTRF No.: FCC 15.407/A Page 6 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 4.3 DESCRIPTION OF TEST MODES The EUT has been tested under its typical operating condition. The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. Test of channel included the lowest and middle and highest frequency to perform the test, then record on this report. Pre-defined engineering program for regulatory testing used to control the EUT for staying in continuous transmitting and receiving mode is programmed. Wifi 5G with U-NII -2A Frequency and Channel list for 802.11a/n (HT20)/802.11ac (VHT20): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 52 5260 60 5300 56 5280 64 5320 Frequency and Channel list for 802.11n (HT40)/ 802.11ac (VHT40): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 54 5270 62 5310 Frequency and Channel list for 802.11ac (VHT80): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 58 5290 Test Frequency and Channel for 802.11a/n (HT20)/802.11ac (VHT20): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 52 5260 60 5300 64 5320 Test Frequency and channel for 802.11n (HT40)/ 802.11ac (VHT40): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 54 5270 N/A N/A 62 5310 Test Frequency and channel for 802.11ac (VHT80): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 58 5290 TTRF No.: FCC 15.407/A Page 7 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World Wifi 5G with U-NII -2C Frequency and Channel list for 802.11a/n (HT20)/802.11ac (VHT20): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 100 5500 116 5580 132 5660 104 5520 120 5600 136 5680 108 5540 124 5620 140 5700 112 5560 128 5640 Frequency and Channel list for 802.11n (HT40)/ 802.11ac (VHT40): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 102 5510 118 5590 134 5670 110 5550 126 5630 Frequency and Channel list for 802.11ac (VHT80): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 106 5530 122 5610 Test Frequency and Channel for 802.11a/n (HT20)/802.11ac (VHT20): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 100 5500 116 5580 140 5700 Test Frequency and channel for 802.11n (HT40)/ 802.11ac (VHT40): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 102 5510 110 5550 134 5670 Test Frequency and channel for 802.11ac (VHT80): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 106 5530 TTRF No.: FCC 15.407/A Page 8 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 5. FACILITIES AND ACCREDITATIONS 5.1 FACILITIES All measurement facilities used to collect the measurement data are located at Bldg 69, Majialong Industry Zone District, Nanshan District, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with preselectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” 5.3 LABORATORY ACCREDITATIONS AND LISTINGS Site Description EMC Lab. : Accredited by CNAS, 2016.10.24 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L2291. Accredited by TUV Rheinland Shenzhen 2016.05.19 The Laboratory has been assessed according to the requirements ISO/IEC 17025. Accredited by FCC, August 06, 2018 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by A2LA, July 31, 2017 The Certificate Registration Number is 4321.01. Accredited by Industry Canada, November 24, 2015 The Certificate Registration Number is 4480A Name of Firm : EMTEK(SHENZHEN) CO., LTD. Site Location : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TTRF No.: FCC 15.407/A Page 9 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 6. SETUP OF EQUIPMENT UNDER TEST 6.1 SETUP CONFIGURATION OF EUT Master Modes Slave Mode 6.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: A 50 ohm load is connected in place of the spectrum analyzer, and the spectrum analyzer is connected in place of the master device and the signal generator is set to CW mode. The amplitude of the signal generator is adjusted to yield a level of –62 dBm as measured on the spectrum analyzer. Without changing any of the instrument settings, the spectrum analyzer is reconnected to the Common port of the Spectrum Analyzer Combiner/Divider. Measure the amplitude and calculate the difference from –62 dBm. Adjust the Reference Level Offset of the spectrum analyzer to this difference. The spectrum analyzer displays the level of the signal generator as received at the antenna ports of the Master Device. The interference detection threshold may be varied from the calibrated value of –62 dBm and the spectrum analyzer will still indicate the level as received by the Master Device. Set the signal generator to produce a radar waveform, trigger a burst manually and measure the level on the spectrum analyzer. Readjust the amplitude of the signal generator as required so that the peak level of the waveform is at a displayed level equal to the required or desired interference detection threshold. Separate signal generator amplitude settings are determined as required for each radar type. TTRF No.: FCC 15.407/A Page 10 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 6.3 SUPPORT EQUIPMENT Item Equipment Mfr/Brand Model/Type No. Series No. Note 1. Wireless Access Point Cisco AIR-CAP3702E-A-K9 FTX182276QD N/A Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. TTRF No.: FCC 15.407/A Page 11 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 7. DYNAMIC FREQUENCY SELECTION REQUIREMENTS 7.1 APPLICABLE STANDARD According to 15.407 7.2 CONFORMANCE LIMIT The dynamic frequency selection requirement Parameter Value Non-occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1. Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second periods. See Notes 1 and 2. U-NII Detection Bandwidth Minimum 100% of the U-NII 99% transmission power bandwidth. See Note 3. Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. The following table lists the DFS The detection threshold values Maximum Transmit Power Value (See Notes 1, 2, and 3) EIRP ≥ 200 milliwatt -64 dBm EIRP < 200 milliwatt and -62 dBm power spectral density < 10 dBm/MHz EIRP < 200 milliwatt that do not meet the power -64 dBm spectral density requirement Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. 7.3 TEST CONFIGURATION Conducted measurements shall be used for DFS test TTRF No.: FCC 15.407/A Page 12 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 7.4 TEST PARAMETERS OF DFS TEST SIGNAL The following table lists the parameters of radar test signals Short Pulse Radar Test Waveforms Long Pulse Radar Test Waveform Minimum Radar Pulse Chirp Number of Percentage Minimum PRI Number of Type Width Width Pulses per of Number of (μsec) Bursts (μsec) (MHz) Burst Successful Trials Detection 5 50-100 5-20 1000-2000 1-3 8-20 80% 30 Frequency Hopping Radar Test Waveform Minimum Hopping Pulse Hopping Percentage Minimum Radar PRI Pulses per Sequence Width Rate of Number of Type (μsec) Hop Length (μsec) (kHz) Successful Trials (msec) Detection 6 1 333 9 0.333 300 70% 30 TTRF No.: FCC 15.407/A Page 13 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 7.5 TRANSMITTER OUTPUT POWER THE CONDUCTED OUTPUT POWER LIST MAX. POWER FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) TX 5260~5320 13.39 21.83 (11a/n20/ac2 0) 5500~5700 15.23 33.34 5270~5310 12.59 18.16 TX (11ac 40/n40MHz) 5510~5670 13.15 20.65 5290 12.97 19.82 TX (11ac 80 MHz) 5530 12.63 18.32 THE MAX EIRP LIST MAX. POWER FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 5260~5320 15.39 34.59 TX (11a) 5500~5700 17.23 52.84 5270~5310 14.59 28.77 TX (11n 40MHz) 5510~5670 15.15 32.73 5290 14.97 31.41 TX (11ac 80 MHz) 5530 14.63 29.04 TTRF No.: FCC 15.407/A Page 14 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 7.6 OPERATION MODES AND REQUIREMENT TEST ITEMS The manufacture shall state whether the EUT is capable of operating as a Master or a Slave modes,if the EUT is capable of operating in more than one operational mode then every operating mode shall be assessed separately. Applicability of DFS Requirements Prior to Use of a Channel Operational Mode Requirement Client Without Radar Client With Radar Master Detection Detection Non-Occupancy Period Yes Not required Yes DFS Detection Yes Not required Yes Threshold Channel Availability Yes Not required Not required Check Time Uniform Spreading Yes Not required Not required U-NII Detection Yes Not required Yes Bandwidth Applicability of DFS requirements during normal operation Operational Mode Requirement Client Without Radar Client With Radar Master Detection Detection DFS Detection Yes Not required Yes Threshold Channel Closing Yes Yes Yes Transmission Time Channel Move Time Yes Yes Yes U-NII Detection Yes Not required Yes Bandwidth 7.7 TEST PROCEDURE According to KDB 905462 D02v02 Section 7. TTRF No.: FCC 15.407/A Page 15 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 8. TEST RESULT 8.1 DETAILED TEST RESULTS Clause MODES Test Parameter Remark Verdict 15.407 DFS Detection Threshold N/A N/A 15.407 Channel Availability Check Time N/A N/A 15.407 Channel Move Time N/A N/A 15.407 Master Channel Closing Transmission Time N/A N/A 15.407 Non-Occupancy Period N/A N/A 15.407 Uniform Spreading N/A N/A 15.407 U-NII Detection Bandwidth N/A N/A 15.407 Radar Detection Threshold N/A N/A 15.407 Channel Move Time Applicable PASS 15.407 Slave Channel Closing Transmission Time Applicable PASS 15.407 Non-Occupancy Period N/A N/A 15.407 U-NII Detection Bandwidth N/A N/A TTRF No.: FCC 15.407/A Page 16 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 8.2 RADAR WAVEFORM Calibration: Maximum Transmit Power is less than 200 milliwatt and power spectral density < 10 dBm/MHz in this report, so detection threshold level is -62dBm. The 801.11a/n/ac have been tested, and the worst result have been recorded in the below page. TTRF No.: FCC 15.407/A Page 17 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World Radar Waveform Master Mode Slave Mode TTRF No.: FCC 15.407/A Page 18 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World 8.3 IN-SERVICE MONITORING UNII Band II-A Radar test singal type 0 Pulse Number of Waveform Detection(Y/N) Trial ID PRI(us) Width(us) Pulses Length(us) 0 1.0 1428.0 18 25704.0 Y 1 1.0 1428.0 18 25704.0 Y 2 1.0 1428.0 18 25704.0 Y 3 1.0 1428.0 18 25704.0 Y 4 1.0 1428.0 18 25704.0 Y 5 1.0 1428.0 18 25704.0 Y 6 1.0 1428.0 18 25704.0 Y 7 1.0 1428.0 18 25704.0 N 8 1.0 1428.0 18 25704.0 Y 9 1.0 1428.0 18 25704.0 Y 10 1.0 1428.0 18 25704.0 Y 11 1.0 1428.0 18 25704.0 Y 12 1.0 1428.0 18 25704.0 Y 13 1.0 1428.0 18 25704.0 N 14 1.0 1428.0 18 25704.0 Y 15 1.0 1428.0 18 25704.0 Y 16 1.0 1428.0 18 25704.0 Y 17 1.0 1428.0 18 25704.0 N 18 1.0 1428.0 18 25704.0 Y 19 1.0 1428.0 18 25704.0 Y 20 1.0 1428.0 18 25704.0 Y 21 1.0 1428.0 18 25704.0 Y 22 1.0 1428.0 18 25704.0 Y 23 1.0 1428.0 18 25704.0 N 24 1.0 1428.0 18 25704.0 Y 25 1.0 1428.0 18 25704.0 Y 26 1.0 1428.0 18 25704.0 Y 27 1.0 1428.0 18 25704.0 Y 28 1.0 1428.0 18 25704.0 Y 29 1.0 1428.0 18 25704.0 Y Detection Rate 86.7% TTRF No.: FCC 15.407/A Page 19 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World UNII Band II-C Radar test singal type 0 Pulse Number of Waveform Detection(Y/N) Trial ID PRI(us) Width(us) Pulses Length(us) 0 1.0 1428.0 18 25704.0 Y 1 1.0 1428.0 18 25704.0 Y 2 1.0 1428.0 18 25704.0 Y 3 1.0 1428.0 18 25704.0 Y 4 1.0 1428.0 18 25704.0 Y 5 1.0 1428.0 18 25704.0 N 6 1.0 1428.0 18 25704.0 Y 7 1.0 1428.0 18 25704.0 Y 8 1.0 1428.0 18 25704.0 Y 9 1.0 1428.0 18 25704.0 Y 10 1.0 1428.0 18 25704.0 Y 11 1.0 1428.0 18 25704.0 Y 12 1.0 1428.0 18 25704.0 N 13 1.0 1428.0 18 25704.0 Y 14 1.0 1428.0 18 25704.0 Y 15 1.0 1428.0 18 25704.0 Y 16 1.0 1428.0 18 25704.0 Y 17 1.0 1428.0 18 25704.0 Y 18 1.0 1428.0 18 25704.0 Y 19 1.0 1428.0 18 25704.0 Y 20 1.0 1428.0 18 25704.0 N 21 1.0 1428.0 18 25704.0 Y 22 1.0 1428.0 18 25704.0 Y 23 1.0 1428.0 18 25704.0 Y 24 1.0 1428.0 18 25704.0 Y 25 1.0 1428.0 18 25704.0 Y 26 1.0 1428.0 18 25704.0 Y 27 1.0 1428.0 18 25704.0 Y 28 1.0 1428.0 18 25704.0 N 29 1.0 1428.0 18 25704.0 Y Detection Rate 86.7% TTRF No.: FCC 15.407/A Page 20 of 21 Report No.: ES180829037W06 Ver.2.0

Access to the World In-Service Monitoring Channel Move Time and Master Mode Slave Mode Channel Closing Transmission Time Operation Frequency 5320MHz Note: T0 = Start time of Radar Burst T1 = end time of Radar Burst T2 = 200ms from end of Radar Burst T3 = Last traffic burst from Client (Channel Move Time) 5500MHz Note: T0 = Start time of Radar Burst T1 = end time of Radar Burst T2 = 200ms from end of Radar Burst T3 = Last traffic burst from Client (Channel Move Time) TTRF No.: FCC 15.407/A Page 21 of 21 Report No.: ES180829037W06 Ver.2.0


Document Created: 2018-09-21 13:39:28
Document Modified: 2018-09-21 13:39:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC