14_R2PRO TestRpt

FCC ID: 2AF8Y-R2PRO

Test Report

Download: PDF
FCCID_4144073

I7] Model: RZPRO FCC Part 15C Measurement and Test Report For Benro Image Technology Industrial Co., Ltd. No. 59 Huoju Road, The 3rd Industrial Park, Tanzhou Town, Zhongshan City, Guangdong Province, China FCC ID: 2AF8SY—R2PRO FCC Rule(s): Part Product Description: RED DOG Tested Model: R2PRO Report No.: STR19018002! Sample Receipt Date: 2018—12—28 Tested Date: 2018—12—28 to 2019—01—18 Issued Date: 2019—01—18 Bs 69 Tested By: Ray Yanq / Engineer j Reviewed By: Silin Chen / EMGC Manager Approved & Authorized By: Jandy So / PSQ Manager J”’(ZW Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33663808 Fax.: +86—755—33608309 Website: www.semfest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Lid. Report No.: STR 190180021 Page I of 31 FCC Part 15.247

Model: R2PRO TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND TEST MODE .................................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. RF EXPOSURE .........................................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 TEST RESULT..........................................................................................................................................................8 4. ANTENNA REQUIREMENT ..................................................................................................................................9 4.1 STANDARD APPLICABLE.........................................................................................................................................9 4.2 EVALUATION INFORMATION ..................................................................................................................................9 5. POWER SPECTRAL DENSITY ...........................................................................................................................10 5.1 STANDARD APPLICABLE.......................................................................................................................................10 5.2 TEST PROCEDURE .................................................................................................................................................10 5.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................10 6. DTS BANDWIDTH .................................................................................................................................................12 6.1 STANDARD APPLICABLE.......................................................................................................................................12 6.2 TEST PROCEDURE .................................................................................................................................................12 6.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................12 7. RF OUTPUT POWER ............................................................................................................................................14 7.1 STANDARD APPLICABLE.......................................................................................................................................14 7.2 TEST PROCEDURE .................................................................................................................................................14 7.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................14 8. FIELD STRENGTH OF SPURIOUS EMISSIONS .............................................................................................16 8.1 STANDARD APPLICABLE.......................................................................................................................................16 8.2 TEST PROCEDURE .................................................................................................................................................16 8.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................17 8.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................17 9. OUT OF BAND EMISSIONS .................................................................................................................................25 9.1 STANDARD APPLICABLE.......................................................................................................................................25 9.2 TEST PROCEDURE .................................................................................................................................................25 9.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................26 Report No.: STR19018002I Page 2 of 31 FCC Part 15.247

Mess ropro 1. GENERAL INFORMATION 11 Product Description for Equipment Under Test (EUT) Client Information Appleant Benro Image Technology Industral Go., L. Address of applicant No. 5 Hulu Road, The 3rd Indlustrial Park, Tanzhou Town, Zhangshan Gity, Guangdong Province, China Manutecturer: Benro Image Technology Industral Go., Ltd. Address of manutacturer: No. 5 Huclu Road, The 3rd Industrial Park, Tanzhou Town, Zhangshan Gity, Guangeong Province, China General Description of EUT Product Name: Ren bog Brand Name: BENRO Model No.. repro 2dding Modells) re Reted Volage: boray Power Adapter 7 New: The es data is gotheredfrom a producionsample, provided by ihe manafucturer The appeararce ofothers modils ated in the repont i iferenfrom main—tst medelRZPRO, but the ireut and the elecvonic construcion do net change, declard by te nanafacturen Technical Characteristics of EUT Bluetaot Version ¥4.1 (BLE mode} Frequency Range: 2a02—2zm0umz RF Ouput Power "1339dBm (Gondued) Data Rete: Ts Modulation arsk uantity of Chamels 40 Channel Separation‘ oune Tyse of Antema ros Antenna Gein: —o.spabl Lowest ntemal Frequency of EVT:_| 16MHe ReyouNo: smisorsover Fagesorsn Tecransar

Model: R2PRO 1.2 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. 558074 D01 15.247 Meas Guidance v05: Guidance For Compliance Measurements On Digital Transmission System, Frequency Hopping Spread Spectrum System, And Hybrid System Devices Operating Under Section 15.247 Of The Fcc Rules ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, KDB 558074 D01 15.247 Meas Guidance v05 The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC – Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: STR19018002I Page 4 of 31 FCC Part 15.247

Messsrzpro 1.5 EUT Setup and Test Mode "The EUT was aperated in the engineering mode to fix the T. frequency that was for the purpose of the measarements Alltesingshallbe peformed under maxmum output pover condition, wilh a dity eycle equal to 100%,and to measure ts highest possible ermissions evel, more dexied desrition as ollows ‘Test Mod Lt Testitode Desripion mm Low Tz micate Ts rign ‘Test Conditions Tempersie Relsive huriciy ATiM Proswe ET Cable List and Details Cable Deseripion Length (m) ShieldedUnstielded Wat / WihoutFerrite 7 7 7 7 Special Cable isand Details Crble Deseripion Lerath (o ShiekdedUmtietded Watn / WihouFerite 7 7 7 7 ry Equipment Uist and Det Descripion Manufactrer Model Serial Number 7 7 7 7 1.6 Measurement Uncertainty Measurement unceriainty Parsmeter Cooditions Uncersiny RFOuiput Pover Conduced soss Occupied Bendwidih Conduceed iss Power Speciral Densily Conduceed +iz Condicld Sporivus Emission Conduceed zue Conducked Emisions Conduceed S45000 t37000 oissowne £3309 30—2000He +4z08 02—ighe +5 sean Transmiter Spurious Emissions Retined Logk+2 sea9 sighe 43908 Reyou No: smrisorsonet Fagesorst Tecra Ban

Model: R2PRO 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due Date Spectrum SEMT-1072 Agilent E4407B MY41440400 2018-05-22 2019-05-21 Analyzer Spectrum Rohde & SEMT-1031 FSP30 836079/035 2018-05-22 2019-05-21 Analyzer Schwarz EMI Test Rohde & SEMT-1007 ESVB 825471/005 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1008 Amplifier Agilent 8447F 3113A06717 2018-05-22 2019-05-21 SEMT-1043 Amplifier C&D PAP-1G18 2002 2018-05-22 2019-05-21 Broadband SEMT-1011 Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 Antenna SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 9773 2017-06-08 2020-06-07 EMI Test Rohde & SEMT-1001 ESPI 101611 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1003 L.I.S.N Schwarz beck NSLK8126 8126-224 2018-05-22 2019-05-21 Rohde & SEMT-1002 Pulse Limiter ESH3-Z2 100911 2018-05-22 2019-05-21 Schwarz Direction SEMT-1168 Pre-amplifier PAP-0126 14141-12838 2018-05-22 2019-05-21 Systems Inc. Direction SEMT-1169 Pre-amplifier PAP-2640 14145-14153 2018-05-22 2019-05-21 Systems Inc. Spectrum Rohde & SEMT-1163 FSP40 100612 2018-05-22 2019-05-21 Analyzer Schwarz DRG Horn A.H. SEMT-1170 SAS-574 571 2018-03-19 2021-03-18 Antenna SYSTEMS SEMT-1166 Power Limiter Agilent N9356B MY45450376 2018-05-22 2019-05-21 SEMT-1048 RF Limiter ATTEN AT-BSF-2400~2500 / 2018-05-22 2019-05-21 SEMT-1076 RF Switcher Top Precision RCS03-A2 / 2018-05-22 2019-05-21 SEMT-C001 Cable Zheng DI LL142-07-07-10M(A) / 2018-03-19 2019-03-18 SEMT-C002 Cable Zheng DI ZT40-2.92J-2.92J-6M / 2018-03-19 2019-03-18 SEMT-C003 Cable Zheng DI ZT40-2.92J-2.92J-2.5M / 2018-03-19 2019-03-18 SEMT-C004 Cable Zheng DI 2M0RFC / 2018-03-19 2019-03-18 SEMT-C005 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 SEMT-C006 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 Report No.: STR19018002I Page 6 of 31 FCC Part 15.247

Messsrzpro 2. SUMMARY OF TEST RESULTS FCC Rutes Description of Tst Hem Restt 321003 RF Exposure Conplian. $ m:foarman Anterns Requirement Congtion: 315205 Resticted Band of Operation Conplian. io Condicted Emission wat fuzame Power Speciral Densiy Gongtion: insrm® D7S Burdvidh Comgtion: inzmm®) RFOuipes Pover Complian: fusmm Racited Emisson Congtion: Eusn Bond Edge Outof Band Emissions) Congtion Nh not appleable ARemarkcThe AC Line Conducked Emissions testing is exermpled because the Bluetooth can not opente during harging. Thus,the AC Line Conducled Emissionsteting is not applicable Reyou No: smrisorsonet Fagerors: Tecra Ban

Messsrzpro 3. RF Exposure 3.1 Standard Applicable Accorting to § 1.1307 and. §2.1093,theportsle brinsmiter mustcomply the RFexposure requirements 32 Test Result "This prodict compled withtherequirementof the RF exsosure, leasesee the RE Exposure Report Reyou No: smrisorsonet Fagedorst Tecra Ban

Model: R2PRO 4. Antenna Requirement 4.1 Standard Applicable According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 4.2 Evaluation Information This product has a PCB antenna, fulfill the requirement of this section. Report No.: STR19018002I Page 9 of 31 FCC Part 15.247

Messsrzpro 5. Power Spectral Density 5.1 Standard Applicable Accortingto 15247(2)(D(i), Fordigtally modlted stems, the power specialdensity condictec from the intertional redistorto heaniennsshallnobe greter hn 8 dBm in any 3 Kite band duringany time itervaof continuoss ransmision 52 Test Procedure Accortingto the KDB 553074 DO1 v05 Subcluse 84 and ANS1 C63.10—2013 Subclause L1.102, the tes imethod ol power spectrl density as below a) Set analyzercenter requencyto DTS channel center fequency b) Sethe span to 15 imes the DTS bandvcth o) SettheRBW io: 3itte © RBW < 100kt asenevw > 3 x ow ®) Drtector=peskc 6 Sweeptime =autocouple 2)Trace mode = max hok 1) Allow raceto fullystabilie 3 Use the peakmarkefction o determine the maximum amoftude fevel wiin the RBW 3) If measired valueexcerds mt reduce RBW (no fes than 3 kHs) and repent 53 Summmary of Test Results/Plots TestMoce TeChanel PoverSpectalDersiy aniton tow as3s L GBKBL® midle 650 8 High 666 s Hease refertothfllowing test plots Reyou No: smrisorsonet Fage rors Teomn Bar

Model: R2PRO Low Middle High Report No.: STR19018002I Page 11 of 31 FCC Part 15.247

Messsrzpro 5. DTS Bandwidth 6.1 Standard Applicable Accorting to 15247(a)(2) Systems usingdigial modllon echrigques may aperate in he $02—928 MHe,2400~ 24835 Mi, and 5725—5850 MHe bands. Thminimum 6B bandwicth shallb aeast 500 kite 62 Test Procedure Accorting to the KDB 588074 DOL vOS Subcluse 8.2 and ANSI C63.102013 Subelause I1.8. L thets method of DT3 Burdvidth asbelows 9 SecRBiy = 100 ie b)Setthevideo banduidih (VBW) > 3 x RBW ©) Drtector= Pesk 4)Trsce mode = mas hold ©) Sweep = sito couple 6 Allow the tnce to siiliee ) Measare the maximum width of temissionthati consrined bythe frequenclesassocited withthe o outermostamplitude point(upper and loverfrequencles) hatae atlnuated by 6 dB refiiveto the raximum levelmeasaredinthe fundamentaemission 6.3 Summmary of Test Results/Plots Test Mode Test Chanrel 6 4B Bandwian Un ie ie tow T se zsoo crskace) Miscle mss zsoo High Tes.oos zsoo Hease refertothfllowing test plots Reyou No: smrisorsonet Fagereorsn Teomn Bar

Model: R2PRO Low Middle High Report No.: STR19018002I Page 13 of 31 FCC Part 15.247

Messsrzpro 7. RF Output Power 7.1 Standard Applicable Accorting io 15.247(0(3) For systems using d tal medulation in he 902—928 MHs, 2400—2483.5 MHe, and 5725—5830 Mz bands: 1 Wai. 7.2TestProcedure Accorting to h KDB—532074 DO1 v05 Subelause 8.3.1. and ANS1 C63,10—2013 Subelause I1.9.L. . his procedire shall be used when he messurementinstumert hs availible a resoliionbandweth thatis grester than the ETS bandvicth a Serthe RBW 2 DTS bandwith bSevew = 3 x Rew €) Setspmn > 3x RBW 4) Sweeptime= auto couple: ) Detector= peal 9 Tesce mode= mhold 2)Allowirace to fily subilice 1 Use pelc madker functionto detemine the peanpliude level 7.3 Summmary of Test Results/Plots HTest Mode TestChael Resting Ouiput Power Link aBm mw mw Low se asse toco crsceue) Misdle 2001 ass toco High use aowe toco Reyou No: smrisorsonet Fage eors reore s ar

Model: R2PRO Low Middle High Report No.: STR19018002I Page 15 of 31 FCC Part 15.247

Model: R2PRO 8. Field Strength of Spurious Emissions 8.1 Standard Applicable According to §15.247(d), in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a). The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency. 8.2 Test Procedure The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.205 15.247(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Report No.: STR19018002I Page 16 of 31 FCC Part 15.247

Model: R2PRO Antenna Tower 1m-4m 3m EUT SYS 1.5m Turntable Table To EMI Receiver Ground Plane Frequency :9kHz-30MHz Frequency :30MHz-1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VBW=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV 8.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15 Limit 8.4 Summary of Test Results/Plots Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Report No.: STR19018002I Page 17 of 31 FCC Part 15.247

Model: R2PRO  Spurious Emissions Below 1GHz Test Channel Low Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 51.4807 27.82 -11.59 16.23 40.00 -23.77 332 100 peak 2 100.2286 27.25 -13.78 13.47 43.50 -30.03 95 100 peak 3 237.4760 26.21 -10.35 15.86 46.00 -30.14 290 100 peak 4 417.6411 26.81 -6.36 20.45 46.00 -25.55 99 100 peak 5 629.4772 28.46 -2.74 25.72 46.00 -20.28 286 100 peak 6 912.8620 27.67 1.37 29.04 46.00 -16.96 220 100 peak Report No.: STR19018002I Page 18 of 31 FCC Part 15.247

Model: R2PRO Test Channel Low Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 50.0566 27.18 -11.60 15.58 40.00 -24.42 324 100 peak 2 90.5374 27.99 -13.51 14.48 43.50 -29.02 99 100 peak 3 239.1473 27.73 -10.11 17.62 46.00 -28.38 112 100 peak 4 441.7426 27.83 -6.11 21.72 46.00 -24.28 90 100 peak 5 605.6592 27.72 -3.25 24.47 46.00 -21.53 217 100 peak 6 916.0687 29.35 1.37 30.72 46.00 -15.28 206 100 peak Report No.: STR19018002I Page 19 of 31 FCC Part 15.247

Model: R2PRO Test Channel Middle Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 51.4807 27.82 -11.59 16.23 40.00 -23.77 54 100 peak 2 93.1132 27.03 -14.02 13.01 43.50 -30.49 346 100 peak 3 244.2321 27.15 -10.11 17.04 46.00 -28.96 76 100 peak 4 432.5457 27.58 -6.06 21.52 46.00 -24.48 111 100 peak 5 629.4772 28.46 -2.74 25.72 46.00 -20.28 98 100 peak 6 912.8620 27.67 1.37 29.04 46.00 -16.96 237 100 peak Report No.: STR19018002I Page 20 of 31 FCC Part 15.247

Model: R2PRO Test Channel Middle Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 50.2324 26.85 -11.60 15.25 40.00 -24.75 116 100 peak 2 91.1746 27.15 -13.64 13.51 43.50 -29.99 279 100 peak 3 239.1473 27.68 -10.11 17.57 46.00 -28.43 96 100 peak 4 368.1116 28.22 -7.37 20.85 46.00 -25.15 143 100 peak 5 530.1014 27.69 -4.89 22.80 46.00 -23.20 66 100 peak 6 810.2654 27.17 -0.49 26.68 46.00 -19.32 172 100 peak Report No.: STR19018002I Page 21 of 31 FCC Part 15.247

Model: R2PRO Test Channel High Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 47.6586 28.23 -11.69 16.54 40.00 -23.46 105 100 peak 2 90.8554 27.73 -13.57 14.16 43.50 -29.34 105 100 peak 3 245.0900 27.14 -10.14 17.00 46.00 -29.00 76 100 peak 4 417.6411 28.76 -6.36 22.40 46.00 -23.60 134 100 peak 5 638.3686 27.87 -2.69 25.18 46.00 -20.82 291 100 peak 6 827.4934 30.36 -0.29 30.07 46.00 -15.93 340 100 peak Report No.: STR19018002I Page 22 of 31 FCC Part 15.247

Model: R2PRO Test Channel High Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 49.3594 27.72 -11.61 16.11 40.00 -23.89 70 100 peak 2 90.5374 27.22 -13.51 13.71 43.50 -29.79 190 100 peak 3 253.8367 26.96 -9.63 17.33 46.00 -28.67 123 100 peak 4 460.7271 28.65 -6.00 22.65 46.00 -23.35 120 100 peak 5 627.2738 28.22 -2.82 25.40 46.00 -20.60 309 100 peak 6 906.4824 26.80 1.18 27.98 46.00 -18.02 327 100 peak Report No.: STR19018002I Page 23 of 31 FCC Part 15.247

Model: R2PRO  Spurious Emissions Below 1GHz Frequency Reading Correct Result Limit Margin Polar Detector (MHz) (dBuV/m) dB (dBuV/m) (dBuV/m) (dB) H/V Low Channel-2402MHz 4804.00 61.50 -3.87 57.63 74.00 -16.37 H PK 4804.00 46.77 -3.87 42.90 54.00 -11.10 H AV 7206.00 56.11 1.14 57.25 74.00 -16.75 H PK 7206.00 41.88 1.19 43.07 54.00 -10.93 H AV 4804.00 62.02 -3.86 58.16 74.00 -15.84 V PK 4804.00 47.24 -3.86 43.38 54.00 -10.62 V AV 7206.00 56.55 1.10 57.65 74.00 -16.35 V PK 7206.00 41.63 1.10 42.73 54.00 -11.27 V AV Middle Channel-2440MHz 4880.00 61.65 -3.74 57.91 74.00 -16.09 H PK 4880.00 47.51 -3.74 43.77 54.00 -10.23 H AV 7320.00 55.22 1.47 56.69 74.00 -17.31 H PK 7320.00 41.11 1.47 42.58 54.00 -11.42 H AV 4880.00 61.37 -3.74 57.63 74.00 -16.37 V PK 4880.00 47.60 -3.74 43.86 54.00 -10.14 V AV 7320.00 55.76 1.47 57.23 74.00 -16.77 V PK 7320.00 41.30 1.47 42.77 54.00 -11.23 V AV High Channel-2480MHz 4960.00 60.87 -3.59 57.28 74.00 -16.72 H PK 4960.00 46.16 -3.59 42.57 54.00 -11.43 H AV 7440.00 54.93 1.79 56.72 74.00 -17.28 H PK 7440.00 41.58 1.79 43.37 54.00 -10.63 H AV 4960.00 61.61 -3.59 58.02 74.00 -15.98 V PK 4960.00 46.53 -3.59 42.94 54.00 -11.06 V AV 7440.00 55.86 1.79 57.65 74.00 -16.35 V PK 7440.00 41.77 1.79 43.56 54.00 -10.44 V AV Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. Report No.: STR19018002I Page 24 of 31 FCC Part 15.247

Messsrzpro 9. Out of Band Emissions 9.1 Standard Applicable Accorting to $15.247 (0) In any 100 kbandiweloutsite thfrequency band in which thespread spectrum or ighally modlated intentonal catoris operting, h radiofrequency power that s produced by theinentional rntiatrshllbea east20 B below thatin the 100 kHe bandvidth wihinthe band thacontsinsthe highesfevel of the desired power,based on ellhean RF conducled ora radinted messurement, provide the transmiter demonsiniescomplance withthe pesk conducted powerlimitsIfthetansmiter complies withthe condicted powerliits based on theuse of RMS averuging ove tminterva,as peritie under paragraph (BX2)of this section, e atlenuation reauired under his nragranh shallbe 0 B intead of 20 dB. Atenuation below the penerais specifec in §15.209(0) is norequired. In adtitin,radnted erissions which fall in theresicted bands,as defined in $15.205(s)must alsocomply with the radnted ermission imitsspecified in 315 2000) 9.2Test Procedure Accorting to the KDB 532074001 v05 Subelause 8. and ANST C3.10—2013 Subelause [L.LL, he Emissions in nonrestited requency bandstest method as llows a) Sthe center requency and span toencompassfrequency range to be measired b)Sethe RBW = 100 ktte qSame¥BW en x Rew 4) Detetor= peok ) Sweep im = auto couple D Trace mod= mas hokd ) Allow recetofilysiabilize 1) Use th peak marker fiction o determine the maximum ampltuce evel Accorting to the KDB 558074 DOL v05 Subelause 8.5 and ANST C63.10—2013 Subelause I1.12,the Emissions in resiriced requency bandstest method as llows A. Radited emision measurements Setspan = wite enough tocaptur the peak levelof he eniscion aperating on the channel elosestto e sardedge, as wellas any modlation productswhichfall outsideof heauthoried band of opertion (2310MHe o 24200z forlow bandedige 2480MHteto 2500M t fohe high bandedge) RBW = LitHe, VBW = TbiHe for pek value measured raw — wins, vew Ob for averige value measured Sueep = tio; Detecior furetion =pesidaverige; Trsce= max hold All the brceto siabiiz, sethe matker on theerission ; the bandedge, oron the highest modltion product ouisideothe band. if is level is greaterthan that atthe bandedge. Enable the markendelis nction, hen se the markerto peak function o mave the matkerto thepeak ohe in—band emision.Those emission must comply wity h 15208 ino fllinthe restieted bands isxed in section 15.205, Notethathe method of messurement KDB publcstionnumber: 913391 may b used forthe edixied bandedge measurements Reyou No: smrisorsonet Fagemorsn Teomn Bar

15. Mess ropro B.. Anternscpor condicted messurments Peakervissionlevelsars measared by seting thnstnimentasfalows: 3) RBW as specified in Tabl 9/ svew > s x rew ©) Drtector= peak 4) Sweep ime auo ) Trice mode = max hold 0 Allow sueeps to cortinue until the trice stabfizes. (Note that the required measarement lime may be lengthened folow—duty:ezcle applications) Table 9—RBW as a function offrequency Freueney rew pie i ioone zonto snR 0 15 Miicto 30Mz Sigte is 1oigle Somee w ooo Mite Toiz to Toie >roo e Ihte If the pesicdetected ampltude can b shown to comply wth the averige imit, then ts ot necessary to perform a separie average messurement Ensure that the amplitude of al unvanted emissions outside of the suirorized fiequency band (excluding resbictc fequency bands)anatenuated byatfeastthe minimar requirement specified in section 8.1. Report thetiree highesemissionrelsive to thfinit 9.3 Summary of Test Results/Plots ReyouNo: smisorsover Fageasorst Tecra Ban

Model: R2PRO  Radiated test Test Channel Low Polarity: Vertical(worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) 1 2310.000 40.23 -7.78 32.45 54.00 -21.55 Average Detector 2310.000 51.38 -7.78 43.60 74.00 -30.40 Peak Detector 2 2390.000 40.30 -7.32 32.98 54.00 -21.02 Average Detector 2390.000 65.16 -7.32 57.84 74.00 -16.16 Peak Detector 3 2401.741 95.06 -7.25 87.81 / / Average Detector 2401.843 99.87 -7.25 92.62 / / Peak Detector Report No.: STR19018002I Page 27 of 31 FCC Part 15.247

Model: R2PRO Test Channel High Polarity: Vertical(worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2479.860 93.81 -6.79 87.02 / / Average Detector 2479.860 98.68 -6.79 91.89 / / Peak Detector 2 2483.500 52.05 -6.77 45.28 54.00 -8.72 Average Detector 2483.500 75.08 -6.77 68.31 74.00 -5.69 Peak Detector 3 2500.000 38.98 -6.67 32.31 54.00 -21.69 Average Detector 2500.000 58.39 -6.67 51.72 74.00 -22.28 Peak Detector Report No.: STR19018002I Page 28 of 31 FCC Part 15.247

Model: R2PRO  Conducted test Low Report No.: STR19018002I Page 29 of 31 FCC Part 15.247

Model: R2PRO Middle Report No.: STR19018002I Page 30 of 31 FCC Part 15.247

Model: R2PRO High ***** END OF REPORT ***** Report No.: STR19018002I Page 31 of 31 FCC Part 15.247


Document Created: 2019-01-22 11:48:15
Document Modified: 2019-01-22 11:48:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC