User manual

FCC ID: 2AF5YCL-680

Users Manual

Download: PDF
FCCID_2785236

1. Power on/off, Mode switch button. FM CL-680 2. Play/Pause, FM Scan Button 1. Press the “MODE” button on the speaker switch to FM RADIO mode. There is a tone "FM Radio” indicate you that MANUAL 3. Previous Track/Radio Station Button the device entered FM Radio mode. 4. Next Track/Radio Station Button. 2. Press and Hold button 2 for 2 seconds the device will 5. Volume Increase Button automatically search FM radio station. The device will play 6. Volume Decrease Button the first station it found after finish auto search. 7. Music Wall Light Control Button 3. Press button 3,4 select station, press 5,6 adjust volume. 8. LED Light Control Button. 9. Reset Button Aux wired speaker 10. Aux In 1. Turn on the cuboid. In Bluetooth or FM mode, if the auxiliary 11. 12V DC Input Charge Port cable is inserted into the AUX IN port it will automatically 12. 5V USB Output Charge port change to Aux in mode 13. Radio Antenna 2. Connect one end of the included 3.5mm auxiliary cable to 14. Bluetooth Indicate Light the AUX IN port in Cuboid and the other end to an external 15. Charge Indicate Light device’s. 3. Open a media player on your device and press PLAY to start playing your music. 1.Turn ON, Turn OFF. 4. Use the controls on your connected device to select music Press and hold Button 1 for 2 seconds to turn on or turn off and adjust volume. 14 15 the device. Music Wall Light 2.Bluetooth Speaker Mode Press button 7 turn on/off music wall light or change mode of 1.Turn on Cuboid，the device enter into Bluetooth mode music all light. default or short press button 1 switch it to Bluetooth mode. There is a tone "Bluetooth” indicate you that the device LED Light entered Bluetooth mode. Press button 8 turn on/off LED light or adjust brightness of 2. When your Bluetooth enabled device finds the speaker, LED light. select “CL-680” from the list of found devices. 3. If required, enter the password 0000 (four zeros). Select Technical specific OK or YES to pair the two units. *Driver: 4 ohm 4. A tone will sound in indicating a successful pairing. The BL *Speaker Power:12W *LED Light Power:5W indicator will remain solid, indicating that you are connected. 13 *Power supply: DC12V, Li-on battery， 8800mah。

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2015-10-12 17:39:37
Document Modified: 2015-10-12 17:39:37
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC