BTN2 FCC RF Exposure-Mobile _MPE_

FCC ID: 2AEVZ-BTN2

RF Exposure Info

Download: PDF
FCCID_2654375

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Application No..: GZEM1505002323CR Page: 1 of 2 FCC ID: 2AEVZ-BTN2 RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Electric Field Magnetic Field Averaging Times Frequency Range Power Density Strength (E) Strength (H) ‫׀‬E‫׀‬ 2 2 ,‫׀‬H‫ ׀‬or S (MHz) (S)(mW/cm ) 2 (V/m) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (b) Limits for General Population / Uncontrolled Exposure Electric Field Magnetic Field Averaging Times Frequency Range Power Density Strength (E) Strength (H) ‫׀‬E‫׀‬ 2 2 ,‫׀‬H‫ ׀‬or S (MHz) (S)(mW/cm ) 2 (V/m) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100000 -- -- 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Application No..: GZEM1505002323CR Page: 2 of 2 FCC ID: 2AEVZ-BTN2 2. MPE Calculation Method 0.5 2 2 E (V/m)=(30*P*G) /d Power Density: Pd(W/m )=E /377 E=Electric Field (V/m) P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to 2 Pd= (30*P*G)/(377*d ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit Limit of Antenna Peak Output Frequency Peak Output Power Density Power Test Gain Power 2 (MHz) Power (mW) (S) (mW/cm ) Density (S) Result (Numeric) (dBm) 2 (mW/cm ) 2402 1 5.07 3.21 0.00636 1 Complies 2441 1 5.06 3.20 0.00636 1 Complies 2480 1 4.91 3.10 0.00617 1 Complies This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.


Document Created: 2015-06-18 11:08:45
Document Modified: 2015-06-18 11:08:45
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC