User Manual

FCC ID: 2AEUPBHARG043

Users Manual

Download: PDF
FCCID_4151550

145.00 mm 115.00 mm Style:Ring-10043 Date: 2018.10.11 Color: PANTONE Cool Gray 11 C 2/S Size: 115X145mm Surface: Gloss varnish 2/S Dim.tolerance: ±2mm Material: 105g C2S Designer: Dylan







Steps for wiring to an existing doorbell Steps for wiring to an existing doorbell q Remove Install the diode (optional) C yourexisting If you‘re wiring your Ring Doorbell to a (7 doorbell digital doorbell — you‘ll know it‘s digital if it 2/ (optional) plays a synthesized melody — then install the included diode. — ’ If replacing an c // existing doorbell, If your existing doorbell is mechanical, DO | shut off powerat the NOT use the diode, as it can damage your . breaker. Then remove existing doorbell it from the wall and disconnect the wires. Not sure? Visit ring.com/diode "Tre Ighter bang on your dlode should be on the sume ie us the wire that runs to the ‘rront® '—:.3‘“?““ terminal on your bal. it you don‘t now which side this s dantt wory, since wiing the dlode the urong way cen‘tdo any harm. if your ball dossn‘t mng when pushing the bution Ifwiring yourRing Doorbellto an existng dootbal, a on your Ring Doobel, transformer with a voliage of 8=26/AC is reauired. If wring Justreverse the wres on irealy t a rensformer a resistor must be used. the backof your Ring ol Doorballand t in. ©C trnsformers and mostintercoms are not supported. uomm o0t P cormel ans ty asein wee 1« ring is


Steps for wiring to an existing doorbell Steps for wiring to an existing doorbell Connect the Wires (optional) Attach the wire Connect the wires coming out of your wall to extensions fi the screws on the back of your Ring Doorbell. (optional) C_—Z Either wire can connect to either screw. The If you have trouble order doesn‘t matter. connecting the wires coming out of your wall to the back of your Ring Doorbell, use the provided wire extensions and wire nuts.



After setting up your Ring Shared Users Select Shared Users to let family Doorbell in the app, select it wore or friends answer live events and This will bring you to the Device Dashboard, view recordings (if recording is where you can change settings and access enabled). various features. Motion Settings ‘s Ring Alerts are » Select Motion Settings to enable notifications you smes and customize your motion receive when detection settings. someone presses the button on the Device Health front of your Ring Visit Device Health to diagnose Doorbell. sevee any problems you run into with Motion Alerts your Ring Doorbell. are notifications you receive when Event History movement is detected within ® View a log of all the events captured by your Ring Doorbell in your Motion Event History. Zones. Switch these alerts on or off on this screen. as 2s

Answering your door Ring Video Recording When someone is at your door, you can This optional feature saves recordings of access these features: every event your Ring Doorbell captures. Two—way Talk — Spest to vistors and hear what they You can access these events on any device have to say running the Ring app or oy logging into your accountat: Microphone — Mute or unmute your mic. ring.com/activity Speaker — Mute or unmute audio in the app. Learn more at: ring.com/video—recording @) Ring Neighborhoods — Share suspicious events with your neighbors. Your new Ring Doorballincludes a fret Recording for you to anfos; Watch your amallinbox for important announcements about ths service. 2 a

5. H aV| ng :;rm:\agivisrégt;ut;ouble completing the When the in—app setup falls look athe front of your Ring Doorbell The light indicates the issue. trouble? Top Flashing White means your Wi— A password was entered incorrectly. Select your WFi network in your phone seitings select the option to forgeti, then reconnect to it agaln to confirm that H e m e a re you‘re using the correct password during setup. Right Flashing White means your Ring SO m e Doorbell may be too far from your router to get a decent signal. Repeat setup in the same room as your router. If this works, answers... tbbeoutewinsionghtojourring. Doorbell Learn mare at: ring.com/chime—pro. Left Flashing White indicates a possible issue with your internet connection. Unplug your modem or router for 40 seconds, plug it back in and then repeat the setup process.

Whyisn‘t my internal doorbell Spinning White inicates that your Ring ringing properly when someone Doorbellisin setup mode. You‘l need to follow the instructionsin the Ring app. presses the button on my Ring? When prompted, connect to the Wi—Fi newark being broadcast by your Ring Make sure the circularlight on the front of your Ring is Doorbell glowing white to confirm that t‘wired correcty. Nothing in this case, repeat setup and If your internal doorbell is digital(which means it note the resulting patter. If the front light preduces a synthesized melody}, make sure you never does anything, then you likely need installed the provided dlade. to charge the battery. if you have installed the diade, it may be installed Why can‘t I find the temporary Ring backwards. Simply reverse the wring on the back of your Ring Doorbell and press the front button again. network on my phone? If your intemal doorbell is mechanical (which means Sometimes your phone fails to pick up the temporary it has a prjsical bell and makes a classic "ding cong* Ring network, If this happens, go to your phone sound),then make sure you didn‘t install the diade. settings, turn off your W—FI connection, walt 30 seconds and tumit back on.If the Ring network sill fls to Visitring.com/diode for installation assistance. appear ensure that the battery in your Ring Doorbellis fully charged. Why can‘t visitors hear me on my If none ofthe above helped... Ring when | talk through the app? Perform a hard reset on your Ring Doorbell by holding If you‘re on an iPhone or IPad, check the microphone down the setup button for 15 seconds, wallng 30 permission on your device. Select Settings, ind Ring and select t Lastly, make sure the switch next to seconds and repeeting the setup process. Microphone is toggled on. Turn off callular data and bluetooth on your mobile If you‘re on an Andraid device, go to Settings > device and ty again. Application/Apps > Application Manager > Ring > Permissions. Ensure everything here is on. Try performing sctup on a differant mobile device. a a


This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For best results, use type Li-Ion batteries. Install only new batteries of the same type in your product. Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. Do not mix old and new batteries. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. Do not dispose of batteries in fire. Batteries should be recycled or disposed of as per state and local guidelines. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Hereby, Bot Home Automation, declares that this consumer electronic is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.ring.com/ DoC.pdf. Protect the device from direct sunlight. Install the device at dry locations and protect it against rain and humidity. The device may not get contact to salt water or other conductive liquids. The device must be charged only within a building in a dry state. © 2016 Bot Home Automation, Inc. RING, ALWAYS HOME, and CHIME are trademarks of Bot Home Automation, Inc. Ring Video Doorbell is patent pending.

Last updated: 08/17/18 FCC Radiation Exposure Statement FCC Radiation Exposure Statement: (1)This Transmitter must not be co­located or operating in conjunction with any other antenna or transmitter. (2)This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) ISED Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. For extremity operation, this device has been tested and meets the IC RF exposure guidelines for use with an accessory that contains no metal. Use of other accessories may not ensure compliance with IC RF exposure guidelines.

Pour le fonctionnement des extrémités, cet appareil a été testé et répond aux directives d’IC d’exposition pour une utilisation avec un accessoire ne contenant pas de métal. L’utilisation d’autres accessoires peut ne pas garantir la conformité avec les directives d’IC d’exposition. LIMITED WARRANTY AND PURCHASE PROTECTION FOR AUSTRALIA CONSUMERS Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. WHAT THE WARRANTY COVERS For a period of one year from the date of your purchase of the Ring Video Doorbell, any malfunction caused by defective parts or workmanship will be corrected at no charge to you. Please keep your dated sales receipt; it is required for all warranty requests. WHAT THE WARRANTY DOES NOT COVER Repair service, damage due to misuse, abuse, negligence, or casualty (e.g., fire), and batteries are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, loss of use, or unauthorized service. This warranty covers only the Ring Video Doorbell and is not extended to other equipment and components that a customer uses in conjunction with our products. Bot Home Automation, Inc.’s maximum liability under this warranty is, to the extent permitted by law, limited to the original purchase price of the Ring Video Doorbell. In addition, Bot Home Automation, Inc. reserves the right to request any product claimed defective to be returned to Bot Home Automation, Inc. for inspection. Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANTABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. IN SO FAR AS SUCH WARRANTIES CANNOT BE DISCLAIMED, THE DURATION AND REMEDIES FOR SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY AND REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW THERE SHALL BE NO LIABILITY ON THE PART OF BOT HOME AUTOMATION, INC. FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Power Input: 8-24VAC, 50/60Hz 200mA To obtain the benefit of the above limited warranty, please contact us at: Bot Home Automation, Inc. 1523 26th Street Santa Monica, CA 90404 USA 1 300 205 983


Document Created: 2019-01-23 14:31:51
Document Modified: 2019-01-23 14:31:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC