5B01S8_User Manual

FCC ID: 2AEUPBHARB001

Users Manual

Download: PDF
FCCID_4134135

83.5mm Beams Bridge 83.5mm RIN-MN00001-AP USER MANUAL RING BEAMS BRIDGE ENGLISH V1.0 REV: 1.1 TOTAL PAGES: 5 DATE: 26-Nov-2018 APPROVE BY: GIL S. TALANGAN Tolerence: -1/+1 mm 02_Beams_Bridge_MANUAL.indd 1 9/21/18 11:22 AM Ring Ring-18042 105g C2S Dylan

How to set up your Ring Choose a good location. For the best wireless range, place Beams Bridge your Bridge near the front of your home, ideally near a window. Download the Ring app. Once you’ve decided on a good The app walks you through setting spot, plug the provided power up and managing your Bridge. supply into an outlet, and connect it to your Bridge with the included Search for “Ring” in one of the app USB cable. stores below, or visit: ring.com/app Download from Windows Store Grab your Wi-Fi password. You’ll need it to set up your Bridge. Write it down here so it’s handy when you need it: 02_Beams_Bridge_MANUAL.indd 2-3 9/21/18 11:22 AM

Set up your Bridge in the Ring app. Set up your Ring Beams lights. In the app, tap Set Up a Device. Since you have a Ring Beams Bridge, you may have one or more When prompted, select Beams and Ring Beams lights. Now that your follow the in-app instructions. Bridge is set up, it’s time to set up your lights. To get started, tap Set Up a Device, select Beams, and follow Doorbells the instructions in the app or the Security Cams included manuals. Chimes Beams Alarm 02_Beams_Bridge_MANUAL.indd 4-5 9/21/18 11:22 AM

Need a little help with setup? Reboot your router. If your in-app setup doesn’t go as If you entered the right password planned, try these tips: but you’re having no luck, try turning your Wi-FI router off, wait 30 Get your Wi-Fi password just right. seconds, then turn it back on. The most common setup issues Then, begin setup again in the Ring come from entering the wrong app. Wi-Fi password. These passwords are case-sensitive, and every little error counts. 02_Beams_Bridge_MANUAL.indd 6-7 9/21/18 11:22 AM

For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 09/21/18 02_Beams_Bridge_MANUAL.indd 8 9/21/18 11:22 AM

FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC RF Exposure statement Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installéet utiliséavec un min


Document Created: 2018-12-28 16:26:41
Document Modified: 2018-12-28 16:26:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC