RF Exposure Evaluation_5LP1Y8

FCC ID: 2AEUPBHAPB001

RF Exposure Info

Download: PDF
FCCID_4233735

FCC ID: 2AEUPBHAPB001 ISED: 20271-BHAPB001 FCC&IC RF Exposure Evaluation 1. Product Information FCC ID: 2AEUPBHAPB001 ISED: 20271-BHAPB001 Product name Pathlight Model number 5LP1Y8 Power supply DC 6V BLE Modulation Type LoRa Antenna Type PCB Antenna(BT) Monopole Antenna type(Lora) Antenna Gain 1 dBi (For BT); 3 dBi (For LoRa) Bluetooth Operation frequency 2402MHz-2480MHz Lora Operation frequency 902.5MHz – 927MHz Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Fix Device ________________________________________________________________________ ___ Page 1 of 4

FCC ID: 2AEUPBHAPB001 ISED: 20271-BHAPB001 2. Evaluation method and Limit According to ANSI/IEEE C95.1-1992, the Criteria Listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna ( linear gain ) R = Distance from Transmitting Antenna ________________________________________________________________________ ___ Page 2 of 4

Eomeremmmen seo rorrsararme; 3. Artenoa infomation Prodictcaonty e anterem cetifateafolows rovded by manatctwen Antemna T: siretoot rct ratema tora Monopole Sntemna siretoot zm Antemna gin Figgy erm Note: Th prdutha tartena, B and lcan ot wrlinsimatanaoasy 1. Conducted Power 43. estSetup Blod Diagram eut Spectrum Anabyser 42 Test Procedure 1) The ETwas drecly connected t the spectrum analyser and antemn a ontput portasshou in the Block dagran; 2) Reading average powein peak detector 4.3 Mteasurement Equipment C : Equipment Manutacturer Modl No. Invertory No. Last Gal. Next Cal x spectrum Anatrer rersight _|_nooion imseoraree |rorsor23 |or00222 Conducted Power Results an vaz Mode Channe! Frequency (MHtz) Conducted Peat Cutont Power (aBm o 2a0e oses ersk is 2a0 o0 as zieo oan Lora SOOREDTS Mox Channel Tre pite Conducted Peak Output Power c anne quency (Mitz (aBm Low wes z050 Lora Middle sie7 16172 Fign ser0 mor Facsas

FCC ID: 2AEUPBHAPB001 ISED: 20271-BHAPB001 5. Manufacturing tolerance Bluetooth GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) -10 -10 -10 Tolerance ±(dB) 1 1 1 Lora Channel Low Middle High Target (dBm) 16 16 16 Tolerance ±(dB) 1 1 1 6. Evaluation Results FCC: Power Maximum Antenna Maximum Maximum Maximum Average Density at Limit Frequency Output Band Gain Power EIRP EIRP EIRP 20cm (mW/cm (MHz) Power (dBi) (dBm) (dBm) (W) (mW) (mW/cm^ ^2) Limit (W) 2) Bluetooth 2402 1 -9 -8 0.000158 1.000 0.158 0.000032 1.000 LoRa 902.5 3 17 20 0.100 1.000 12.589 0.003 0.602 Stimulation Trasmission ∑(Power Density / Limit) Power Density / Band Frequency Of Limit LoRa + Bluetooth Bluetooth 2402 0.000032 0.166132 Lora 902.5 0.1661 . Remark: 1. Output power including tune up tolerance; 2. ∑(Power Density / Limit): This is a summation of [(power density for each transmitter/antenna include in the simultan eous transmission)/(corresponding MPE limit )], for LoRa + Bluetooth. 3. Considering the LoRa /Bluetooth transmitter of the EIRP performance listed in the table above,the aggregated (power density / limit) is smaller than 1, and MPE of 2 collocated transmitters is compliant 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 and RSS-102 Issue 5 for the uncontrolled RF Exposure. .......................THE END OF REPORT......................... ________________________________________________________________________ ___ Page 4 of 4


Document Created: 2019-04-08 13:37:50
Document Modified: 2019-04-08 13:37:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC