Test Report NII

FCC ID: 2AEUPBHALP011

Test Report

Download: PDF
FCCID_3770566

FCC Test Report Report No. : FR5N2432-07AN FCC Test Report Equipment : Wi-Fi enabled Video Doorbell Brand Name : RING Model No. : Video Doorbell Pro FCC ID : 2AEUPBHALP011 Standard : 47 CFR FCC Part 15.407 Operating Band : 5150 MHz – 5250 MHz 5725 MHz – 5850 MHz Applicant : Ring, Inc. 1523 26th St, Santa Monica, CA 90404, USA Manufacturer : Chicony Electronics (Dong Guan ) Co.,Ltd. San Zhong Guan Li Qu, Qingxi Town, Dongguan City Guangdong 523651 China This report was evaluated for permissive change. We, SPORTON, would like to declare that the evaluation in accordance to KDB 178919 D01 Permissive Change Policy v06 and shown compliance with the applicable technical standards. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Phoenix Chen / Assistant Manager Tested by: XXXX / Engineer SPORTON INTERNATIONAL INC. Page No. : 1 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 6 2 TRANSMITTER TEST RESULT ............................................................................................................ 7 2.1 Unwanted Emissions .............................................................................................................................. 7 PHOTOGRAPHS OF EUT v01 SPORTON INTERNATIONAL INC. Page No. : 2 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN Summary of Test Result Conformance Test Specifications Report Ref. Std. Description Result Clause Clause 2.1 15.407(b) Unwanted Emissions Complied SPORTON INTERNATIONAL INC. Page No. : 3 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN Revision History Report No. Version Description Issued Date FR5N2432-07AN Rev. 01 Initial issue of report Jan. 25, 2018 FR5N2432-07AN Rev. 02 Update the contents of the report Mar. 02, 2018 FR5N2432-07AN Rev. 03 Update the contents of the report Mar. 05, 2018 SPORTON INTERNATIONAL INC. Page No. : 4 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Frequency (MHz) Channel Number 5150-5250 a, n (HT20) 5180-5240 36-48 [4] 5725-5850 5745-5825 149-165 [5] 5150-5250 n (HT40) 5190-5230 38-46 [2] 5725-5850 5755-5795 151-159 [2] Band Mode BWch (MHz) Nant 5.15-5.25GHz 802.11a 20 1TX 5.725-5.85GHz 802.11a 20 1TX 5.15-5.25GHz 802.11n HT20 20 1TX 5.725-5.85GHz 802.11n HT20 20 1TX 5.15-5.25GHz 802.11n HT40 40 1TX 5.725-5.85GHz 802.11n HT40 40 1TX Note:  11a, HT20 and HT40 use a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation.  VHT20, VHT40, VHT80 use a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM, 256QAM modulation.  BWch is the nominal channel bandwidth. 1.1.2 Table for Permissive Change This product is an extension of original one reported under Sporton project number: FR5N2432-03AN Below is the table for the change of the product with respect to the original one. Modifications Performance Checking The name of the applicant is modified. N/A The worst case of Radiated Emissions was The material of back enclosure is changed from evaluated, and the test result of original test report plastic to metal. was found to be the worst case scenario. SPORTON INTERNATIONAL INC. Page No. : 5 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  KDB 178919 D01 Permissive Change Policy v06  47 CFR FCC Part 15  ANSI C63.10-2013  KDB 789033 D02 v02r01 SPORTON INTERNATIONAL INC. Page No. : 6 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN 2 Transmitter Test Result 2.1 Unwanted Emissions 2.1.1 Transmitter Radiated Unwanted Emissions Limit Unwanted emissions below 1 GHz and restricted band emissions above 1GHz limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: Using the distance of 1m during the test for above 18 GHz, and the test value to correct for the distance factor at 3m. SPORTON INTERNATIONAL INC. Page No. : 7 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN Un-restricted band emissions above 1GHz Limit Operating Band Limit 5.15 - 5.25 GHz e.i.r.p. -27 dBm [68.2 dBuV/m@3m] 5.25 - 5.35 GHz e.i.r.p. -27 dBm [68.2 dBuV/m@3m] 5.47 - 5.725 GHz e.i.r.p. -27 dBm [68.2 dBuV/m@3m] 5.725 - 5.85 GHz 5.650-5700 GHz: e.i.r.p. -27 ~ 10 dBm [68.2 ~ 105.2 dBuV/m@3m] 5.700-5720 GHz: e.i.r.p. 10 ~ 15.6 dBm [105.2 ~ 110.8 dBuV/m@3m] 5.720-5725 GHz: e.i.r.p. 15.6 ~ 27 dBm [110.8 ~ 122.2 dBuV/m@3m] 5.850-5.855 GHz: e.i.r.p. 27 ~ 15.6 dBm [122.2 ~ 110.8 dBuV/m@3m] 5.855-5.875 GHz: e.i.r.p. 15.6 ~ 10 dBm [110.8 ~ 105.2 dBuV/m@3m] 5.875-5.925 GHz: e.i.r.p. 10 ~ -27 dBm [105.2 ~ 68.2dBuV/m@3m] Other un-restricted band: e.i.r.p. -27 dBm [68.2 dBuV/m@3m] Note 1: Measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). 2.1.2 Test Procedures Test Method  Measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. Measurements shall not be performed at a distance greater than 30 m for frequencies above 30 MHz, unless it can be further demonstrated that measurements at a distance of 30 m or less are impractical. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements).  The average emission levels shall be measured in [duty cycle ≥ 98 or duty factor].  For the transmitter unwanted emissions shall be measured using following options below:  Refer as KDB 789033, clause G)2) for unwanted emissions into non-restricted bands.  Refer as KDB 789033, clause G)1) for unwanted emissions into restricted bands. Refer as KDB 789033, G)6) Method VB (ANSI C63.10, clause 4.1.4.2.3), Reduced VBW. Refer as KDB 789033, clause G)5) (ANSI C63.10, clause 4.1.4.2.2), measurement procedure peak limit.  For radiated measurement.  Refer as ANSI C63.10, clause 6.4 for radiated emissions below 30 MHz and test distance is 3m.  Refer as ANSI C63.10, clause 6.5 for radiated emissions 30 MHz to 1 GHz and test distance is 3m.  Refer as ANSI C63.10, clause 6.6 for radiated emissions above 1GHz.  The any unwanted emissions level shall not exceed the fundamental emission level.  All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 8 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN 2.1.3 Test Setup Transmitter Radiated Unwanted Emissions 9kHz ~30MHz 30MHz~1GHz SPORTON INTERNATIONAL INC. Page No. : 9 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0

FCC Test Report Report No. : FR5N2432-07AN Above 1GHz 2.1.4 Transmitter Unwanted Emissions (Below 30MHz) The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2.1.5 Test Result of Transmitter Unwanted Emissions Refer as 1.1.3 SPORTON INTERNATIONAL INC. Page No. : 10 of 10 TEL : 886-3-3273456 Report Version : Rev. 03 FAX : 886-3-3270973 Issued Date : Mar. 05, 2018 FCC ID: 2AEUPBHALP011 Report Template No.: HE1-D1 Ver1.0


Document Created: 2018-03-06 14:52:26
Document Modified: 2018-03-06 14:52:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC