RF Exposure Info_R1

FCC ID: 2AEUPBHAFB001

RF Exposure Info

Download: PDF
FCCID_4148733

Produkte Products A TUVRheinland® Priifbericht — Nr.: 50214197 001 Auftrags—Nr.: 1160054277 Seite 1 von 2 Test Report No.: Order No: Page 1 of 2 Kunden—Referenz—Nr.: N/A Auftragsdatum: 27.12.2018 Client Reference No.: Order date: Auftraggeber: Ring LLC Client: 1§23 26St, Santa Monica, CA 90404, USA Priifgegenstand: Floodlight Battery Test item: Bezeichnung / Typ—Nr. : 5B21S8 Identification / Type No. : Auftrags—Inhalt: TUV Rheinland — Radio Frequency Exposure Compliance Order content: Priifgrundlage: FCC Part1—1.1307(b)(1) Test specification: ANSVIEEE C95.1—1992 Wareneingangsdatum: 21.12.2018 Date of receipt: Priifmuster—Nr.: A000860702—001/002 Test sample No.: Priifzeitraum: 29.12.2018 Testing period: Ort der Priifung: TUV Rheinland / CCIC Place of testing: (Ningbo) Co., Ltd. Priiflaboratorium: TUV Rheinland / CCIC Testing laboratory: (Ningbo) Co., Ltd. Priifergebnis*: Pass Test result® gepriift/ fested by: kontrolliert/ reviewed by: rragen Savt i Te k U 03.01.2019 Season Yang/iPE * ‘ 03.01.2019 Feng Liang /TC Te 5. Datum Name/Stellung Unterschrift Datum Name/Stellung Unterschrift Date Name/Position Signature Date Name/Position Signature Sonstiges/ Other: Refer to page 2 for further information. Zustand des Priifgegenstandes bei Anlieferung: Priufmuster vollstanding und unbesch@digt Condition of the test item at delivery : Test item complete and undamaged *Legende 1= Sehr gut 2= gut 3= befriedigend 4= ausreichend 5 = mangethaft P(ass) =entspricht 0.g. Prifgrundage(n) F(ail)= entspricht 0.g. Prifgrundlage(n) N/A = nicht anwendbar N/T =nicht getestet Legend. 1= very good 2= good 3= salisfactory 4= sufficient 5= poor P(ass) = passed a m. test specification(s) Fail= failed a m. test specification(s) N/A = not applicable NZT = not tested Dieser Priifbericht bezieht sich nur auf das 0.g. Priifmuster und darf ohne Genehmigung der Priifstelle nicht auszugsweise vervielfaltigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Priifzeichens. This test report relates to the a. m. test sample. Without permission ofthe test center this test report is not permilted to be voe duplicated in exiracts. This test report does not entitle to carry any safely mark on this or similar products. TUV Rheinland / CCIC (Ningbo) Co., Ltd. 3F, building ©13, R&D Park, No.32 Lane 299 Guanghua Road National Hi—Tech Zone, Ningbo 315048, P.R. China

Produkte Products Prüfbericht - Nr.: 50214197 001 Seite 2 von 2 Test Report No.: Page 2 of 2 Radio Frequency Exposure Compliance Electromagnetic Fields Result: Pass The EUT belongs portable device and according to Appendix A of KDB447498, the maximum power for test exclusion is 16mW for 900MHz and 10mW for 2.4GHz. Due to the highest power of the EUT is 0.67mW for 900MHz and 0.0002mW for 2400MHz, it deems to be comply with the test exclusion requirement for each operating frequency. Meanwhile, as the two wireless module of the EUT can be transmitted simultaneously via two different antenna. Hence according to the following clause of KDB447498, “When an antenna qualifies for the standalone SAR test exclusion of 4.3.1 and also transmits simultaneously with other antennas, the standalone SAR value must be estimated according to the following to determine the simultaneous transmission SAR test exclusion criteria:36 1) [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)/x] W/kg, for test separation distances ≤ 50 mm; where x = 7.5 for 1-g SAR and x = 18.75 for 10-g SAR.” The calculated result is: 0.017W/kg which is lower than the limit 1.6W/kg. Hence the product meet the radio frequency exposure requirement.


Document Created: 2019-01-28 14:47:17
Document Modified: 2019-01-28 14:47:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC