test report co-location

FCC ID: 2AEUPBHABS001

Test Report

Download: PDF
FCCID_3593464

ONE WORLD OUR APPROVAL RADIO TEST REPORT – 337515-9TRFWL Applicant: BOT Home Automation Inc. Product name: Ring Model: Base Station FCC ID: IC Registration number: 2AEUPBHABS001 20271-BHABS001 Specifications: Co-location testing Date of issue: October 5, 2017 Test engineer(s): David Duchesne, Senior EMC/Wireless Specialist Signature: Reviewed by: Andrey Adelberg, Senior Wireless/EMC Specialist Signature: www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included SCC Accredited LAB in this report are within the scope of this accreditation ilac MRA LAB Accrédité CCN Co-location.docx; Date: September 11, 2017 TM

Lab and test locations Company name Nemko Canada Inc. Facilities Ottawa site: Montreal site: Almonte site: 303 River Road, Ottawa, ON, Canada, 292 Labrosse Avenue, Pointe-Claire, QC, 1500 Peter Robinson Road, West K1V 1H2 Canada, H9R 5L8 Carleton, ON, Canada, K0A 1L0 Tel: +1 613 737 9680 Tel: +1 514 694 2684 Tel: +1 613 256-9117 Fax: +1 613 737 9691 Fax: +1 514 694 3528 Fax: +1 613 256-8848 Test site registration Organization Recognition numbers and location FCC CA2040 (Ottawa); CA2041 (Montreal) ISED CA2040A-4 (Ottawa); CA2040G-5 (Montreal); CA2040A-3 (Almonte) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 337515-9TRFWL Page 2 of 25

Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer ................................................................................................................................................................................................ 4 1.2 Test specifications ................................................................................................................................................................................................................. 4 1.3 Test methods ......................................................................................................................................................................................................................... 4 1.4 Exclusions .............................................................................................................................................................................................................................. 4 1.5 Statement of compliance ..................................................................................................................................................................................................... 5 1.6 Test report revision history .................................................................................................................................................................................................. 5 Section 2. Summary of test results ....................................................................................................................................................................... 6 2.1 Testing period........................................................................................................................................................................................................................ 6 2.2 FCC test results ...................................................................................................................................................................................................................... 6 2.3 RSS test results ...................................................................................................................................................................................................................... 6 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 Sample information .............................................................................................................................................................................................................. 7 3.2 EUT information .................................................................................................................................................................................................................... 7 3.3 Technical information ........................................................................................................................................................................................................... 7 3.4 Co-location test plan ............................................................................................................................................................................................................. 8 3.5 Product description and theory of operation ..................................................................................................................................................................... 8 3.6 EUT exercise details .............................................................................................................................................................................................................. 8 3.7 EUT setup diagram ................................................................................................................................................................................................................ 9 Section 4. Engineering considerations ................................................................................................................................................................ 10 4.1 Modifications incorporated in the EUT for compliance ................................................................................................................................................... 10 4.2 Technical judgment ............................................................................................................................................................................................................. 10 4.3 Deviations from laboratory tests procedures ................................................................................................................................................................... 10 Section 5. Test conditions .................................................................................................................................................................................. 11 5.1 Atmospheric conditions ...................................................................................................................................................................................................... 11 5.2 Power supply range ............................................................................................................................................................................................................ 11 Section 6. Measurement uncertainty ................................................................................................................................................................. 12 6.1 Uncertainty of measurement ............................................................................................................................................................................................. 12 Section 7. Test equipment ................................................................................................................................................................................. 13 7.1 Test equipment list ............................................................................................................................................................................................................. 13 Section 8. Testing data ...................................................................................................................................................................................... 14 8.1 Spurious emissions caused by co-located transmitters ................................................................................................................................................... 14 Section 9. Block diagrams of test set-ups ........................................................................................................................................................... 25 9.1 Radiated emissions set-up for frequencies below 1 GHz ................................................................................................................................................. 25 9.2 Radiated emissions set-up for frequencies above 1 GHz ................................................................................................................................................. 25 Report reference ID: 337515-9TRFWL Page 3 of 25

Section 1 Report summary Section 1. Report summary 1.1 Applicant and manufacturer Company name BOT Home Automation Inc. Address 1523 26th Street, Santa Monica, California United States 90404 1.2 Test specifications FCC 47 CFR Part 15, Subpart C, Clause 15.247 Operation in the 902–928 MHz, 2400–2483.5 MHz, and 5725–585 MHz FCC 47 CFR Part 15, Subpart E, Clause 15.407 Unlicensed National Information Infrastructure Devises FCC 47 CFR Part 15, Subpart C, Clause 15.249 Operation within the bands 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz, and 24.0–24.25 GHz. FCC 47 CFR Part 22, Subpart C, Clause 22.359 Emission limitations. RSS-247, Issue 2, Feb 2017, Section 5 Standard specifications for frequency hopping systems and digital transmission systems operating in the bands 902‑928 MHz, 2400-2483.5 MHz and 5725-5850 MHz RSS-247, Issue 2, Feb 2017, Section 6 Technical requirements for licence-exempt local area network devices and digital transmission systems operating in the 5 GHz band RSS-210 Issue 9, August 2016, Annex B.10 Devices operating in 902–928, 2400–2483.5 and 5725–5875 MHz RSS-139 Issue 3, July 2015, Section 6 Advanced Wireless Services (AWS) Equipment Operating in the Bands 1710-1780 MHz and 2110-2180 MHz 1.3 Test methods 789033 D02 General UNII Test Procedures Guidelines for Compliance Testing of Unlicensed National Information Infrastructure (U-NII) Devices Part New Rules v01r04 (May2, 2017) 15, Subpart E 662911 D01 Multiple Transmitter Output Emissions Testing of Transmitters with Multiple Outputs in the Same Band v02r01 (October 31, 2013) 662911 D02 MIMO with Cross Polarized Emissions testing of transmitters with multiple outputs in the same band (MIMO) with Cross Polarized Antenna v01 (October 25, 2011) Antenna 558074 D01 DTS Meas Guidance v04 Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating (April 5, 2017) Under §15.247 ANSI C63.10 v2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices 1.4 Exclusions As per Nemko quote Q102124338R1, the EUT was assessed for radiated emissions as a verification with multiple transmitters enabled at the same time to ensure compliance was maintained. Report reference ID: 337515-9TRFWL Page 4 of 25

Section 1 Report summary 1.5 Statement of compliance In the configuration tested, the EUT was found compliant. Testing was completed against all relevant requirements of the test standard or as per detailed in the section 1.4 Exclusions above. Results obtained indicate that the product under test complies in full with the requirements tested. The test results relate only to the items tested. See “Summary of test results” for full details. 1.6 Test report revision history Table 1.6-1: Test report revision history Revision # Date of issue Details of changes made to test report TRF October 5, 2017 Original report issued Report reference ID: 337515-9TRFWL Page 5 of 25

Section 2: Summary of test results Section 2. Summary of test results 2.1 Testing period Test start date September 18, 2017 Test end date September 18, 2017 2.2 FCC test results Table 2.2-1: Result summary Part Section Test description Verdict §15.247 d Unwanted emissions (Radiated) Pass §15.249 d Spurious emissions (except harmonics) Pass §15.407 (b)(1) Undesirable emission limits (Operating in the band 5.15-5.25 GHz) Pass §22.359 (a) Out of band emissions Pass Notes:  The EUT was only assessed for the radiated emissions. No conducted measurements were performed.  Only emissions that were a product of multiple transmitters enabled were verified for continued compliance. 2.3 RSS test results Table 2.3-1: Result summary RSS Part Section Test description Verdict RSS-247 5.5 Unwanted emissions1 Pass RSS-210 B.10 (b) Spurious emissions (except for harmonics) Pass RSS-247 6.2.1.2 Unwanted emission limits (Operating in the band 5.15-5.25 GHz) Pass RSS-139 6.6 Transmitter Unwanted Emissions Pass Notes:  The EUT was only assessed for the radiated emissions. No conducted measurements were performed.  Only emissions that were a product of multiple transmitters enabled were verified for continued compliance. Report reference ID: 337515-9TRFWL Page 6 of 25

Section 3: Equipment under test (EUT) details Section 3. Equipment under test (EUT) details 3.1 Sample information Receipt date August 21, 2017 Nemko sample ID number Item # 3 3.2 EUT information Product name Ring Model Base Station Serial number BHHB11731PG000029 3.3 Technical information Applicant IC company number 20271 IC UPN number WL18DBMOD All used IC test site(s) Reg. number 2040A-4 Table 3.3-1: Antenna information LTE Antenna Antenna type Band 12 Peak gain, dBi Band 5 peak gain, dBi Band 4 peak gain, dBi Main Monopole 2.7 1.5 5.4 Diversity Monopole 1 1.5 3.9 Wi-Fi Antenna Antenna type 2.4 GHz Band peak gain, dBi 5 GHz Band peak gain, dBi Wi-Fi Right Inverted F 3.3 4.6 Wi-Fi Left Inverted F 3.9 4.6 Dual band antenna Antenna type 900 MHz Band peak gain, dBi 2.4 GHz Band peak gain, dBi Z-Wave Inverted F 1.2 NA Zigbee Inverted F NA 5.8 Notes: None Report reference ID: 337515-9TRFWL Page 7 of 25

Section 3: Equipment under test (EUT) details 3.4 Co-location test plan Table 3.4-1: C0-Location configurations Radio module device Radio parameters Configuration 1: LTE + ZigBee + Z-Wave + SimpleLink (TI1310) LTE 1728 MHz Zigbee Low Channel 11: 2405 MHz Z-Wave High Channel 916 MHz SimpleLink (TI1310) High Channel 927.8 MHz Configuration 2: BT + ZigBee + Z-Wave + SimpleLink (TI1310) BT Low Channel 00: 2402 MHz Zigbee Low Channel 11: 2405 MHz Z-Wave High Channel 916 MHz SimpleLink (TI1310) High Channel 927.8 MHz Configuration 3: WiFi 2.4 GHz + ZigBee + Z-Wave + SimpleLink (TI1310) WIFI Low Channel 01: 2412 MHz Zigbee Low Channel 11: 2405 MHz Z-Wave High Channel 916 MHz SimpleLink (TI1310) High Channel 927.8 MHz Configuration 4: WiFi 5 GHz + ZigBee + Z-Wave + SimpleLink (TI1310) WIFI (UNI band) Low Channel 36: 5180 MHz Zigbee Low Channel 11: 2405 MHz Z-Wave High Channel 916 MHz SimpleLink (TI1310) High Channel 927.8 MHz Notes: None 3.5 Product description and theory of operation Communications Hub for Home Security Products 3.6 EUT exercise details The EUT was setup in continuous transmit state. Report reference ID: 337515-9TRFWL Page 8 of 25

Section 3: Equipment under test (EUT) details 3.7 EUT setup diagram DVE Switching Adapter NETGEAR AC adapter MN: DSA-24CB-05 FUS MN: PWR-002-004 AC input AC input AC input NetGear Router MN: RP114 SN: RP14B26572705 AC/DC adapter Nemko Asset FA002851 EUT Dell Laptop Nemko Asset: FA002851 Figure 3.7-1: Setup diagram Report reference ID: 337515-9TRFWL Page 9 of 25

Section 4: Engineering consideration Section 4. Engineering considerations 4.1 Modifications incorporated in the EUT for compliance There were no modifications performed to the EUT during this assessment. 4.2 Technical judgment None 4.3 Deviations from laboratory tests procedures No deviations were made from laboratory procedures. Report reference ID: 337515-9TRFWL Page 10 of 25

Section 5: Test conditions Section 5. Test conditions 5.1 Atmospheric conditions Temperature 15–30 °C Relative humidity 20–75 % Air pressure 86–106 kPa When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document , the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: 337515-9TRFWL Page 11 of 25

Section 6: Measurement uncertainty Section 6. Measurement uncertainty 6.1 Uncertainty of measurement UKAS Lab 34 and TIA-603-B have been used as guidance for measurement uncertainty reasonable estimations with regards to previous experience and validation of data. Nemko Canada, Inc. follows these test methods in order to satisfy ISO/IEC 17025 requirements for estimation of uncertainty of measurement for wireless products. Measurement uncertainty budgets for the tests are detailed below. Measurement uncertainty calculations assume a coverage factor of K = 2 with 95% certainty. Test name Measurement uncertainty, dB Radiated spurious emissions 3.78 Report reference ID: 337515-9TRFWL Page 12 of 25

Section 7: Test equipment Section 7. Test equipment 7.1 Test equipment list Table 7.1-1: Equipment list Equipment Manufacturer Model no. Asset no. Cal cycle Next cal. Receiver/spectrum analyzer Rohde & Schwarz ESU 26 FA002043 1 year Jan. 31/18 3 m EMI test chamber TDK SAC-3 FA002047 1 year Dec. 1/17 Horn with Preamp ETS-Lindgren 3117-PA FA002840 1 year Nov. 11/17 Bilog antenna (20–3000 MHz) Sunol JB3 FA002108 1 year June 27/18 50 Ω coax cable Huber + Suhner None FA002830 1 year May 12/18 50 Ω coax cable C.C.A. None FA002555 1 year May 2/18 Notch filter 2400–2483 MHz Microwave Circuits 2400–2483 MHz FA001940 — VOU Notch filter 5150–5350 MHz Microwave Circuits 5150–5350 MHz FA001941 — VOU High pass filter Microwave Circuits H1G212G1 FA002342 — VOU Notes: NCR - no calibration required, VOU - verify on use Report reference ID: 337515-9TRFWL Page 13 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS Section 8. Testing data 8.1 Spurious emissions caused by co-located transmitters 8.1.1 Definitions and limits FCC §15.247 (d): In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). FCC §15.249 (d): Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. FCC §15.407 (b): (1) For transmitters operating in the 5.15–5.25 GHz band: all emissions outside of the 5.15–5.35 GHz band shall not exceed an EIRP of −27 dBm/MHz. (5) The emission measurements shall be performed using a minimum resolution bandwidth of 1 MHz. A lower resolution bandwidth may be employed near the band edge, when necessary, provided the measured energy is integrated to show the total power over 1 MHz. (6) Unwanted emissions below 1 GHz must comply with the general field strength limits set forth in § 15.209. (7) The provisions of § 15.205 apply to intentional radiators operating under this section. (8) When measuring the emission limits, the nominal carrier frequency shall be adjusted as close to the upper and lower frequency block edges as the design of the equipment permits. FCC §22.359 (a) Out of band emissions. The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log (P) dB. RSS-210 Section B.10 (b): Emissions radiated outside of the specified frequency bands, except for harmonic emissions, shall be attenuated by at least 5 0 dB below the level of the fundamental emissions or to the general field strength limits listed in RSS-Gen, whichever is less stringent. RSS-247 Section 5.5: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the RF power that is produced shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter c omplies with the conducted power limits based on the use of root-mean-square averaging over a time interval, as permitted under section 5.4(d), the attenuation required shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified in RSS-Gen is not required. RSS-247 Section 6.2.1.2: For transmitters operating in the band 5150–5250 MHz, all emissions outside the band 5150–5350 MHz shall not exceed −27 dBm/MHz e.i.r.p. However, any unwanted emissions that fall into the band 5250–5350 MHz must be 26 dBc, when measured using a resolution bandwidth between 1 and 5% of the occupied bandwidth, above 5.25 GHz. Otherwise, the transmission is considered as intentional and the devices shall implement dynamic frequency selection (DFS) and transmitter power control (TPC) as per the requirements for the band 5250–5350 MHz. RSS-139 Section 6.6: i. In the first 1.0 MHz bands immediately outside and adjacent to the equipment’s smallest operating frequency block,Footnote 2 which can contain the equipment’s occupied bandwidth, the emission power per any 1% of the emission bandwidth shall be attenuated below the transmitter output power P (in dBW) by at least 43 + 10 log10 p (watts) dB. ii. After the first 1.0 MHz outside the equipment’s smallest operating frequency block, which can contain the equipment’s occupi ed bandwidth, the emission power in any 1 MHz bandwidth shall be attenuated below the transmitter output power P (in dBW) by at least 43 + 10 log10 p (watts) dB. IC RSS-Gen Section 8.10: Restricted bands, identified in table 6 of RSS-Gen Section 8.10, are designated primarily for safety-of-life services (distress calling and certain aeronautical bands), certain satellite downlinks, radio astronomy and some government uses. Except where otherwise indicated, the following restrictions a pply: a. fundamental components of modulation of licence-exempt radio apparatus shall not fall within the restricted bands of below; b. unwanted emissions falling into restricted bands of below shall comply with the limits specified in RSS-Gen; c. unwanted emissions not falling within restricted frequency bands shall either comply with the limits specified in the applicable RSS, or with those specified in RSS-Gen. Report reference ID: 337515-9TRFWL Page 14 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.1 Definitions and limits, continued Table 8.1-1: FCC §15.209 and RSS-Gen – Radiated emission limits Frequency, Field strength of emissions Measurement distance, m MHz µV/m dBµV/m 0.009–0.490 2400/F 67.6 – 20 × log10(F) 300 0.490–1.705 24000/F 87.6 – 20 × log10(F) 30 1.705–30.0 30 29.5 30 30–88 100 40.0 3 88–216 150 43.5 3 216–960 200 46.0 3 above 960 500 54.0 3 Notes: In the emission table above, the tighter limit applies at the band edges. For frequencies above 1 GHz the limit on peak RF emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test Table 8.1-2: ISED restricted frequency bands MHz MHz MHz GHz 0.090–0.110 12.51975–12.52025 399.9–410 5.35–5.46 2.1735–2.1905 12.57675–12.57725 608–614 7.25–7.75 3.020–3.026 13.36–13.41 960–1427 8.025–8.5 4.125–4.128 16.42–16.423 1435–1626.5 9.0–9.2 4.17725–4.17775 16.69475–16.69525 1645.5–1646.5 9.3–9.5 4.20725–4.20775 16.80425–16.80475 1660–1710 10.6–12.7 5.677-5.683 25.5–25.67 1718.8–1722.2 13.25–13.4 6.215–6.218 37.5–38.25 2200–2300 14.47–14.5 6.26775–6.26825 73–74.6 2310–2390 15.35–16.2 6.31175–6.31225 74.8–75.2 2655–2900 17.7–21.4 8.291–8.294 108–138 3260–3267 22.01–23.12 8.362–8.366 156.52475–156.52525 3332–3339 23.6–24.0 8.37625–8.38675 156.7–156.9 3345.8–3358 31.2–31.8 8.41425–8.41475 240–285 3500–4400 36.43–36.5 12.29–12.293 322–335.4 4500–5150 Above 38.6 Notes: None Report reference ID: 337515-9TRFWL Page 15 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.2 Definitions and limits, continued Table 8.1-3: FCC restricted frequency bands MHz MHz MHz GHz 0.090–0.110 16.42–16.423 399.9–410 4.5–5.15 0.495–0.505 16.69475–16.69525 608–614 5.35–5.46 2.1735–2.1905 16.80425–16.80475 960–1240 7.25–7.75 4.125–4.128 25.5–25.67 1300–1427 8.025–8.5 4.17725–4.17775 37.5–38.25 1435–1626.5 9.0–9.2 4.20725–4.20775 73–74.6 1645.5–1646.5 9.3–9.5 6.215–6.218 74.8–75.2 1660–1710 10.6–12.7 6.26775–6.26825 108–121.94 1718.8–1722.2 13.25–13.4 6.31175–6.31225 123–138 2200–2300 14.47–14.5 8.291–8.294 149.9–150.05 2310–2390 15.35–16.2 8.362–8.366 156.52475–156.52525 2483.5–2500 17.7–21.4 8.37625–8.38675 156.7–156.9 2690–2900 22.01–23.12 8.41425–8.41475 162.0125–167.17 3260–3267 23.6–24.0 12.29–12.293 167.72–173.2 3332–3339 31.2–31.8 12.51975–12.52025 240–285 3345.8–3358 36.43–36.5 12.57675–12.57725 322–335.4 3600–4400 Above 38.6 13.36–13.41 Notes: None 8.1.3 Test summary Verdict Pass Test date September 18, 2017 Temperature 21 °C Test engineer David Duchesne Air pressure 995 mbar Test location Ottawa Relative humidity 50 % 8.1.4 Observations, settings and special notes  The spectrum was searched from 30 MHz to 18 GHz.  The spectral plots have been corrected with the associated transducer factors (i.e. antenna factors, cable loss, amplifier gains, and attenuators).  Radiated measurements were performed at a distance of 3 m Report reference ID: 337515-9TRFWL Page 16 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.3 Observations, settings and special notes Spectrum analyser settings for radiated measurements within restricted bands below 1 GHz: Resolution bandwidth: 100 kHz Video bandwidth: 300 kHz Detector mode: Peak Trace mode: Max Hold Spectrum analyser settings for peak radiated measurements within restricted bands above 1 GHz: Resolution bandwidth: 1 MHz Video bandwidth: 3 MHz Detector mode: Peak Trace mode: Max Hold Spectrum analyser settings for average radiated measurements within restricted bands above 1 GHz: Resolution bandwidth: 1 MHz Video bandwidth: 3 MHz Detector mode: RMS Trace mode: Average (100 Traces) For WIFI Spectrum analyser settings for average radiated measurements at bands edge: Resolution bandwidth: 100 kHz Video bandwidth: 300 kHz Detector mode: RMS Trace mode: Average (100 Traces) Span: 2 MHz (Instrument set to center frequency of the emission to be measured (within 2 MHz of the authorized band edge). Report reference ID: 337515-9TRFWL Page 17 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data 105 100 90 80 70 Level in dBµV/m 60 50 40 30 20 10 5 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz P K+_M A XH F CC 15.205 a nd R S S -Ge n R e stricte d b a nd s Lim its Figure 8.1-1: Radiated spurious emissions products from co-located transmitters, Configuration 1 120 115 LT E T x fund am e nta l 110 105 100 95 Zigb e e T x Funda m ental 90 85 Level in dBµV/m 80 75 70 65 60 55 50 45 40 35 30 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 Frequency in MHz PK+_M AXH FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s lim its The spectral plot is a summation of a vertical and horizontal scan. The spectral scan has been corrected with the associated transducer factors (i.e. antenna factors, cable loss, amplifier gains, and attenuators. Figure 8.1-2: Radiated spurious emissions products from co-located transmitters within 1–3 GHz, Configuration 1 Report reference ID: 337515-9TRFWL Page 18 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued 80 75 70 65 60 Level in dBµV/m 55 50 45 40 35 30 3G 5G 6 7 8 9 10G 18G Frequency in Hz PK+_M AXH FCC Part 15 a nd ICES- Cla ss B 3m Pea k Limit FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s lim its The spectral plot is a summation of a vertical and horizontal scan. The spectral scan has been corrected with the associated transducer factors (i.e. antenna factors, cable loss, amplifier gains, and attenuators. Figure 8.1-3: Radiated spurious emissions products from co-located transmitters within 3–18 GHz, Configuration 1 Report reference ID: 337515-9TRFWL Page 19 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued * RBW 1 MHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 3 MHz 53.81 dBµV VBW 1 MHz 43.15 dBµV Ref 87 dBµV * Att 0 dB SWT 2.5 ms 2.483580128 GHz Ref 92 dBµV * Att 5 dB SWT 20 ms 2.483580128 GHz 90 80 A A 1 PK 1 RM * 80 VIEW MAXH 70 TDS 70 TDS 60 PA PA 1 PS PS 60 50 50 SWP 100 of 100 3DB 3DB 40 1 AC AC 40 30 30 20 20 F1 F1 10 Center 2.4835 GHz 2 MHz/ Span 20 MHz Center 2.4835 GHz 5 MHz/ Span 50 MHz Figure 8.1-4: Upper band edge, Configuration 2 (BLE High Channel and Figure 8.1-5: Lower band edge, Configuration 2 (BLE Low Channel and Date: 18.SEP.2017 13:58:06 Date: 18.SEP.2017 13:55:39 Zigbee High Channel) Peak detector Zigbee Low Channel) Avg. detector * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 98.27 dBµV Ref 102 dBµV * Att 15 dB SWT 20 ms 927.724358974 MHz 1 100 Marker 2 [T1 ] 87.82 dBµV 916.009615385 MHz A 2 90 1 PK VIEW 80 TDS 70 PA PS 60 50 3DB AC 40 30 20 10 Center 921.0576923 MHz 5 MHz/ Span 50 MHz Figure 8.1-6: Configuration 2 (Z-Wave and TI Chip) Peak detector Date: 18.SEP.2017 14:20:50 Report reference ID: 337515-9TRFWL Page 20 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued 105 100 90 80 70 Level in dBµV/m 60 50 40 30 20 10 5 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz PK+_M AXH FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s Lim its Figure 8.1-7: Radiated spurious emissions products from co-located transmitters below 1 GHz, Configuration 2 80 75 70 Zigb e e T x Funda m ental a nd BT LE 65 60 Level in dBµV/m 55 50 45 40 35 30 1G 2G 3G 4G 5G 6 8 10G 18G Frequency in Hz FCC Part 15 a nd ICES - Cla ss B 3m Ave ra ge Lim it FCC 15.205 a nd RSS-Ge n Re stricte d b a nd s lim its PK+_M AXH FCC Part 15 a nd ICES- Cla ss B 3m Pea k Limit Figure 8.1-8: Radiated spurious emissions products from co-located transmitters within 1–18 GHz, Configuration 2 Report reference ID: 337515-9TRFWL Page 21 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued * RBW 1 MHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] VBW 3 MHz 54.85 dBµV VBW 10 MHz 44.96 dBµV Ref 87 dBµV * Att 0 dB SWT 2.5 ms 2.389663462 GHz Ref 87 dBµV * Att 0 dB SWT 2.5 ms 2.389663462 GHz 80 80 A A 1 PK 1 RM * 70 70 VIEW AVG 60 TDS 60 TDS 1 PA PA 50 PS 50 PS 1 40 40 SWP 100 of 100 3DB 3DB 30 30 AC AC 20 20 10 10 0 0 F2 F2 F1 F1 -10 -10 Center 2.39 GHz 5 MHz/ Span 50 MHz Center 2.39 GHz 5 MHz/ Span 50 MHz Figure 8.1-9:13:31:31 Date: 18.SEP.2017 Upper band edge, Configuration 2 (WIFI Low Channel and Figure 8.1-10: Date: 18.SEP.2017 Lower band edge, Configuration 2 (WIFI Low Channel and 13:33:05 Zigbee Low Channel) Peak detector Zigbee Low Channel) Avg. detector * RBW 1 MHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 3 MHz 69.38 dBµV VBW 1 MHz 39.63 dBµV Ref 112 dBµV * Att 5 dB SWT 2.5 ms 2.484102564 GHz Ref 92 dBµV * Att 5 dB SWT 15 ms 2.483669872 GHz 110 90 A A 1 PK 100 1 RM * 80 VIEW AVG 90 TDS 70 TDS PA PS PS 80 60 1 70 50 SWP 100 of 100 3DB 3DB AC AC 1 60 40 50 30 40 20 F1 F1 Center 2.4835 GHz 4 MHz/ Span 40 MHz Center 2.4835 GHz 3 MHz/ Span 30 MHz Figure 8.1-11: Date: 18.SEP.2017 Upper band edge, Configuration 2 (WIFI High Channel and 13:43:18 Figure 8.1-12: Date: 18.SEP.2017 Lower band edge, Configuration 2 (WIFI high Channel and 13:46:50 Zigbee High Channel) Peak detector Zigbee High Channel) Avg. detector Report reference ID: 337515-9TRFWL Page 22 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued 105 100 90 80 70 Level in dBµV/m 60 50 40 30 20 10 5 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz P K+_M A XH FCC 15.205 a nd R S S -Ge n R e stricte d b a nd s Lim its Figure 8.1-13: Radiated spurious emissions products from co-located transmitters below 1 GHz, Configuration 3 80 75 70 W IFI a nd Zig b ee 65 60 Level in dBµV/m 55 50 45 40 35 30 1G 2G 3G 4G 5G 6 8 10G 18G Frequency in Hz PK+_M AXH FCC Part 15 a nd ICES- Cla ss B 3m Pea k Limit FCC Part 15 a nd ICES - Cla ss B 3m Ave ra ge Lim it FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s lim its Figure 8.1-14: Radiated spurious emissions products from co-located transmitters within 1–18 GHz, Configuration 3 Report reference ID: 337515-9TRFWL Page 23 of 25

Section 8 Testing data Test name Radiated spurious emissions products from co-located transmitters Specification FCC and RSS 8.1.4 Test data, continued 105 100 90 80 70 Level in dBµV/m 60 50 40 30 20 10 5 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz PK+_M AXH FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s Lim its Figure 8.1-15: Radiated spurious emissions products from co-located transmitters below 1 GHz, Configuration 4 80 75 70 Zigb e e T x fund am e nta l 65 60 Level in dBµV/m 55 50 45 40 35 30 1G 2G 3G 4G 5G 6 8 10G 18G Frequency in Hz PK+_M AXH FCC Part 15 a nd ICES- Cla ss B 3m Pea k Limit FCC Part 15 a nd ICES - Cla ss B 3m Ave ra ge Lim it FCC 15.205 a nd R SS-Ge n R e stricte d b a nd s lim its Figure 8.1-16: Radiated spurious emissions products from co-located transmitters within 1–18 GHz, Configuration 4 Report reference ID: 337515-9TRFWL Page 24 of 25

Section 9: Block diagrams of test set-ups Section 9. Block diagrams of test set-ups 9.1 Radiated emissions set-up for frequencies below 1 GHz Radio absorbing material Antenna mast Test antenna 4m 3m Test EUT antenna Non- conducting table 1m 0.8 m Metal ground plane Turn table Receiver 9.2 Radiated emissions set-up for frequencies above 1 GHz Radio absorbing material Antenna mast Test antenna 4m 3m EUT Test antenna Non- conducting table 1.5 m 1m Metal ground plane Turn table Receiver RF pre-amp Report reference ID: 337515-9TRFWL Page 25 of 25


Document Created: 2017-10-05 08:08:28
Document Modified: 2017-10-05 08:08:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC