RF Test Report

FCC ID: 2AEMI-BRN310

Test Report

Download: PDF
FCCID_4202322

Test Report No.: RF180831N010-2 TEST REPORT Applicant Particle Industries,Inc Address 126 Post St, 4th floor, San Francisco, CA 94108 USA Manufacturer or Particle Industries,Inc Supplier Address 126 Post St, 4th floor, San Francisco, CA 94108 USA Product Boron 2G/3G Brand Name Particle Industries, Inc Model BRN310 Additional Model & N/A Model Difference Date of tests Sep. 03, 2018 ~ Nov. 08, 2018 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.225 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Breeze Jiang Approved by Glyn He Project Engineer / EMC Department Supervisor / EMC Department Date: Dec. 10, 2018 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 1 of 28 Report Version 1

Test Report No.: RF180831N010-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................................... 4 1 SUMMARY OF TEST RESULTS ............................................................................................. 5 2 MEASUREMENT UNCERTAINTY ......................................................................................... 5 3 GENERAL INFORMATION ..................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT .................................................................................... 6 3.2 DESCRIPTION OF TEST MODES ...................................................................................... 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ...................................................... 7 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ..................................................... 9 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................................ 9 4 TEST TYPES AND RESULTS .............................................................................................. 10 4.1. CONDUCTED EMISSION MEASUREMENT ............................................................... 10 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 10 4.1.2 TEST INSTRUMENTS ............................................................................................ 10 4.1.3 TEST PROCEDURES..............................................................................................11 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................11 4.1.5 TEST SETUP .......................................................................................................... 12 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 12 4.1.7 TEST RESULTS ...................................................................................................... 13 4.2. RADIATED EMISSION AND BANDEDGE MEASUREMENT ....................................... 15 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 15 4.2.2 TEST INSTRUMENTS ............................................................................................ 16 4.2.3 TEST PROCEDURES............................................................................................. 17 4.2.4 DEVIATION FROM TEST STANDARD ................................................................... 17 4.2.5 TEST SETUP .......................................................................................................... 18 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 19 4.2.7 TEST RESULTS ...................................................................................................... 19 4.3. FREQUENCY TOLERANCE ......................................................................................... 21 4.3.1. LIMIT OF FREQUENCY TOLERANCE ................................................................. 21 4.3.2. TEST INSTRUMENTS ........................................................................................... 21 4.3.3. TEST PROCEDURES ............................................................................................ 22 4.3.4. DEVIATION FROM TEST STANDARD .................................................................. 22 4.3.5. TEST SETUP ......................................................................................................... 22 4.3.6. EUT OPERATING CONDITIONS .......................................................................... 23 4.3.7. TEST RESULTS ..................................................................................................... 23 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 2 of 28 Report Version 1

Test Report No.: RF180831N010-2 4.4. 20dB BANDWIDTH ....................................................................................................... 24 4.4.1 LIMITS OF 20dB BANDWIDTH .............................................................................. 24 4.4.2 TEST INSTRUMENTS ............................................................................................ 24 4.4.3 TEST PROCEDURE ............................................................................................... 25 4.4.4 DEVIATION FROM TEST STANDARD ................................................................... 25 4.4.5 TEST SETUP .......................................................................................................... 25 4.4.6 EUT OPERATING CONDITION .............................................................................. 26 4.4.7 TEST RESULTS ...................................................................................................... 26 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ........................................................... 27 6. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................................................................... 28 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 3 of 28 Report Version 1

Test Report No.: RF180831N010-2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF180831N010-2 Original release Dec. 10, 2018 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 4 of 28 Report Version 1

Test Report No.: RF18031N010-2 1 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD TEST TYPE AND LIMIT RESULT REMARK SECTION 15.207 AC Power Conducted Emission PASS Meet the requirement of limit. 15.225 The field strength of any PASS Meet the requirement of limit. (a)&(b)&(c) emissions within the band The field strength of any 15.225 (d) emissions appearing outside of PASS Meet the requirement of limit. the 13.110-14.010 MHz band 15.225 (e) Frequency tolerance PASS Meet the requirement of limit. 15.215 (c) 20dB Bandwidth PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS No antenna connector is used. 2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 9kHz~30MHz 2.70dB 9KHz ~ 30MHz 2.16dB 30MHz ~ 1GMHz 3.76dB Radiated emissions 1GHz ~ 18GHz 4.84dB 18GHz ~ 40GHz 4.96dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 5 of 28 Report Version 1

Test Report No.: RF18031N010-2 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Boron 2G/3G MODEL NO. BRN310 FCC ID 2AEMI-BRN310 POWER SUPPLY Li+ PIN /Battery connector: DC 3.7V from Li-ion Battery or VUSB PIN /USB connector :DC 5V from USB Host Unit MODULATION TECHNOLOGY NFC MODULATION TYPE ASK OPERATING FREQUENCY 13.56MHz NUMBER OF CHANNEL 1 ANTENNA TYPE Loop antenna I/O PORTS Refer to user’s manual CABLE SUPPLIED N/A NOTE: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. 2. For the test results, the EUT had been tested with all conditions. But only the worst case was shown in test report. 3. Please refer to the EUT photo document (Reference No.: 180831N010) for detailed product photo. 4. The EUT is wireless module, it no any accessories. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 6 of 28 Report Version 1

Test Report No.: RF18031N010—2 3.2 DESCRIPTION OF TEST MODES The EUT only have one channel. | CHANNEL _| FREQUENCY (MHz) | | 4 | 13.56 | 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST Please see section 5 photograph of the test configuration for reference. 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL Pre—Scan has been conducted to determine the worst—case mode from all possible combinations between available modulations, data rates, XYZ axis and antenna ports The worst case was found when positioned on X axis for radiated emission. Following channel(s) was (were) selected for the final test as listed below: EUT CONFIGURE APPLICABLE TO DESCRIPTION MODE RE | FT | PLC | BW A ~ | ~ | — | V Powered by Fully Battery B = | = | ~ | — Powered by Adapter Where RE: Radiated Emission FT: Frequency tolerance PLC: Power Line Conducted Emission BW: 20dB Bandwidth RADIATED EMISSION TEST: K —Pre—Scan has been conducted to determine the worst—case mode from all possible combinations between available modulations, XYZ axis, antenna ports (if EUT with antenna diversity architecture) and packet type. KX —Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE| TEstED cHanneL ‘ESTED FREQUENCY popyLATION TYPE AxIS MODE (MHZ) A | 4 13.56 | ASK | x | No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 7 of 28 Report Version 1

Test Report No.: RF18031N010—2 B U R E A U V E R I TA S FREQUENCY TOLERANCE: K This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. K Pre—Scan has been conducted to determine the worst—case mode from all possible combinations between available modulations, antenna ports (if EUT with antenna diversity architecture), and packet types. KX —Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE| TESTED CHANNEL TESTED FREQUENCY MODULATION TYPE AXIS MODE (MHZ) A | 4 13.56 | ASK | x | POWER LINE CONDUCTED EMISSION TEST: K —This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. K Pre—Scan has been conducted to determine the worst—case mode from all possible combinations between available modulations, antenna ports (if EUT with antenna diversity architecture), and packet types. KX —Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE| TESTED CHANNEL TESTED FREQUENCY MODULATION TYPE AXIS MODE (MHZ) s | 1 13.56 | ASK | x | 20dB_ BANDWIDTH: K —This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. K Pre—Scan has been conducted to determine the worst—case mode from all possible combinations between available modulations, antenna ports (if EUT with antenna diversity architecture), and packet types. K Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE| TESTED CHANNEL TESTED FREQUENCY MODULATION TYPE AXIS MODE (MHZ) A | 1 13.56 | ASK | x | No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 8 of 28 Report Version 1

Test Report No.: RF18031N010-2 TEST CONDITION: TEST VOLTAGE APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (SYSTEM) RE 25deg. C, 53%RH DC3.7V from Fully Battery Xue Wang FT 25deg. C, 53%RH DC3.7V from Fully Battery Xue Wang PLC 20deg. C, 56%RH DC 5V from Adapter Sen He BW 25deg. C, 60%RH DC3.7V from Fully Battery Robert Cheng 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. Section 15.225 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: 1. All test items have been performed and recorded as per the above standards. 2. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (sDOC). The test report has been issued separately. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 DC source LONG WEI PS-6403D 010934269 N/A 2 Li-ion Battery N/A DC3.7V N/A N/A 3 Adapter N/A DC5V 1.5A N/A N/A 4 Mobile phone Apple ML7F2CH/A C6KQKXLAGRY8 N/A NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 DC Line: Unshielded, Detachable 1.0m 2 N/A 3 USB Line: Unshielded, Detachable 0.6m 4 N/A NOTE: All power cords of the above support units are non-shielded (1.8m). No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 9 of 28 Report Version 1

Test Report No.: RF18031N010-2 4 TEST TYPES AND RESULTS 4.1. CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1.The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESR7 101494 Mar. 21,18 Mar. 20,19 Artificial Mains Network Rohde&Schwarz ENV216 101173 Mar. 03,18 Mar. 02,19 Artificial Mains Network Rohde&Schwarz ESH3-Z5 100317 Apr. 11,18 Apr. 10,19 SCHWARZBEC Voltage probe TK 9421 TK 9421-176 Jan. 17,18 Jan. 16,19 K ADT_Cond_V Test software ADT N/A N/A N/A 7.3.7 NOTE: 1. The test was performed in shielded room 553. 2. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 10 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 11 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.1.5 TEST SETUP V e r tic a l G r o u n d R e f e r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l G r o u n d R e f e r e n c e P la n e N o t e : 1 .S u p p o r t u n its w e r e c o n n e c te d t o s e c o n d L IS N . 2 .B o t h o f L IS N s ( A M N ) a r e 8 0 c m f r o m E U T a n d a t le a s t 8 0 f r o m o th e r u n its a n d o t h e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS a. Turned on the power and connected of all equipment. b. EUT was operated according to the type used was description in manufacturer’s specifications or the User's Manual. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 12 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.1.7 TEST RESULTS CONDUCTED WORST-CASE DATA: PHASE Line 6dB BANDWIDTH 9kHz Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.60893 10.36 2.61 -4.95 12.97 5.41 56.00 46.00 -43.03 -40.59 2 0.80772 10.45 10.10 -1.93 20.55 8.52 56.00 46.00 -35.45 -37.48 3 1.09139 10.23 0.54 -5.48 10.77 4.75 56.00 46.00 -45.23 -41.25 4 2.91750 9.69 1.34 -4.87 11.03 4.82 56.00 46.00 -44.97 -41.18 5 4.15950 9.90 4.31 -3.96 14.21 5.94 56.00 46.00 -41.79 -40.06 6 16.95975 9.94 1.28 -3.91 11.22 6.03 60.00 50.00 -48.78 -43.97 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 13 of 28 Report Version 1

Test Report No.: RF18031N010-2 PHASE Neutral 6dB BANDWIDTH 9kHz Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.17933 10.16 -1.92 -4.63 8.24 5.53 64.52 54.52 -56.28 -48.99 2 0.79713 9.95 6.18 -3.52 16.13 6.43 56.00 46.00 -39.87 -39.57 3 1.31100 9.75 -3.52 -6.54 6.23 3.21 56.00 46.00 -49.77 -42.79 4 3.19650 10.11 -1.04 -5.17 9.07 4.94 56.00 46.00 -46.93 -41.06 5 4.06500 9.69 2.75 -4.14 12.44 5.55 56.00 46.00 -43.56 -40.45 6 15.76950 9.81 3.63 -2.59 13.44 7.22 60.00 50.00 -46.56 -42.78 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 14 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.2. RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT The field strength of any emissions shall not exceed the following limits: (a)15.848mV/m(84dBuV/m) at 30m, within the band 13.553-13.567 MHz; (b)334uV/m(50.5dBuV/m) at 30m, within the band 13.410-13.553 MHz and 13.567-13.710MHz; (c)106uV/m(40.5dBuV/m) at 30m, within the band 13.110-13.410 MHz and 13.710-14.010MHz; The field strength of any emissions appearing outside of the 13.110-14.010 MHz band shall not exceed the general radiated emission limits in § 15.209. FIELD STRENGTH MEASUREMENT DISTANCE FREQUENCIES (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4. The measured field strength was extrapolated to distance 30 meters, using the formula that the limit of field strength varies as the inverse distance square (40dB per decade of distance) Example: 13.56MHz = 15848uV/m 30m = 84dBuV/m 30m = 84+20log(30/3)2 3m = 124dBuV/m No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 15 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.2.2 TEST INSTRUMENTS 9KHz~30MHz Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESR7 101564 Jan. 18,18 Jan. 17,19 Active Loop Antenna SCHWARZBECK FMZB 1519B 1519B-045 May 04,18 May 03,19 Amplifier Burgeon BPA-530 100210 Apr. 18,18 Apr. 18,19 ADT_Radiated Test Software ADT N/A N/A N/A _V8.7.07 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. 2. The test was performed in 10m Chamber 3. The FCC Site Registration No. is 749762. 30MHz~1GHz Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESU40 100449 Mar. 21,18 Mar. 20,19 Bilog Antenna Teseq CBL 6111D 30643 Aug.11,18 Aug. 10,19 Amplifier Burgeon BPA-530 100220 Apr. 18,18 Apr. 18,19 3m Semi-anechoic ETS-LINDGREN 9m*6m*6m NSEMC003 Feb. 10,18 Feb. 09,19 Chamber ADT_Radiated Test software ADT N/A N/A N/A _V7.6.15.9.2 NOTE: 1. The test was performed in 966 Chamber (a 3m Semi-anechoic chamber). 2. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. 3. The horn antenna is used only for the measurement of emission frequency above1GHz if tested. 4. The FCC Site Registration No. is 749762. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 16 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3&10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, For battery operated equipment, the equipment tests shall be perform using fresh batteries. The turntable was rotated to maximize the emission level. g. For below 30MHz, a loop antenna with its vertical plane is place 3m from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. And the centre of the loop shall be 1m above the ground. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 17 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.2.5 TEST SETUP Below 30MHz 30MHz~1GHz Ant. Tower 1-4m 3m EUT Turn Table 0.8m Ground Plane Spectrum For the actual test configuration, please refer to the attached file (Test Setup Photo). No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 18 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. 4.2.7 TEST RESULTS FIELD STRENGTH (BELOW 30MHZ AT 3M) Correction Raw Emission Freq. Polarity Limit Margin No. Factor Value Level (MHz) (0° / 90°) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) 1 *13.56(QP) 23.55 19.19 42.74 0° 124.0 -81.26 2 27.12(QP) 24.35 8.93 33.28 0° 69.5 -36.22 3 *13.56(QP) 23.55 15.78 39.33 90° 124.0 -84.67 4 27.12(QP) 24.35 5.81 30.16 90° 69.5 -39.34 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. " * ": Fundamental frequency. 6. For the test results, both 0° and 90° polarizations of the antenna are set to make the measurement, but only the worst case was shown in test report. TEST PLOT 0° 90° No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 19 of 28 Report Version 1

Test Report No.: RF18031N010-2 BELOW 1GHz WORST-CASE DATA: CHANNEL Channel 1 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9KHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 18.27 QP 40.00 -21.73 1.00 H 209 29.40 -11.13 2 351.78 19.26 QP 46.00 -26.74 1.00 H 271 29.86 -10.60 3 555.42 25.65 QP 46.00 -20.35 1.00 H 344 29.61 -3.96 4 647.13 25.97 QP 46.00 -20.03 1.00 H 345 29.05 -3.08 5 734.18 27.01 QP 46.00 -18.99 1.00 H 202 28.58 -1.57 6 872.53 31.88 QP 46.00 -14.12 1.00 H 342 32.15 -0.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 19.39 QP 40.00 -20.61 1.00 V 348 30.52 -11.13 2 482.36 22.04 QP 46.00 -23.96 1.00 V 119 29.55 -7.51 3 552.31 25.31 QP 46.00 -20.69 1.00 V 250 29.54 -4.23 4 634.70 26.70 QP 46.00 -19.30 1.00 V 356 29.77 -3.07 5 737.29 28.67 QP 46.00 -17.33 1.00 V 103 29.90 -1.23 6 875.64 32.10 QP 46.00 -13.90 1.00 V 286 32.54 -0.44 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The emission levels of other frequencies were less than 20dB margin against the limit. 4. Margin value = Emission level – Limit value. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 20 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.3. FREQUENCY TOLERANCE 4.3.1. LIMIT OF FREQUENCY TOLERANCE The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of –20 degrees to 50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. 4.3.2. TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Power Sensor Keysight U2021XA MY55060016 Jun. 13,18 Jun. 12,19 Power Sensor Keysight U2021XA MY55060018 Jun. 13,18 Jun. 12,19 Power Meter Anritsu ML2495A 1139001 Apr. 13,18 Apr. 13,19 Power Sensor Anritsu MA2411B 1531155 Apr. 13,18 Apr. 13,19 Digital Multimeter FLUKE 15B A1220010DG Oct. 21, 18 Oct.20, 19 Humid & Temp Haida HD-2257 110807201 Sep.05,18 Sep. 04,19 Programmable Tester Oscilloscope Agilent DSO9254A MY51260160 Nov. 08,17 Nov. 07,18 Signal Analyzer Rohde & Schwarz FSV7 102331 Nov. 04,17 Nov. 03,18 Signal Generator Agilent N5183A MY50140980 Jan. 02,18 Jan. 01,19 Agile Signal Agilent 8645A Agilent Sep.01, 18 Aug.31, 19 Generator Spectrum Analyzer Keysight N9020A MY55400499 Mar. 21,18 Mar. 20,19 MXG-B RF Vector Keysight N5182B MY56200288 Jan. 02,18 Jan. 01,19 Signal Generator BLUETOOTH Rohde&Schwarz CBT32 100811 Jul.06, 18 Jul. 05, 19 TESTER Attenuator MINI BW-S10W2+ S130129FGE2 N/A N/A DC Source Keysight E3642A MY56146098 N/A N/A NOTE: 1. The test was performed in RF Oven room. 2. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 21 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.3.3. TEST PROCEDURES a) The EUT was placed inside the environmental test chamber and powered by nominal DC voltage. b) Turn the EUT on and couple its output to a spectrum analyzer. c) Turn the EUT off and set the chamber to the highest temperature specified. d) Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT on and measure the operating frequency after 2, 5, and 10 minutes. e) Repeat step c) and d) with the temperature chamber set to the lowest temperature. f) The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 minutes. The supply voltage was then adjusted on the EUT from 85% to 115% and the frequency record. 4.3.4. DEVIATION FROM TEST STANDARD No deviation. 4.3.5. TEST SETUP Temperature Spectrum Analyzer DC Power Supply No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 22 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.3.6. EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. 4.3.7. TEST RESULTS FREQUEMCY STABILITY VERSUS TEMP. 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE TEMP. POWER Measured Frequency Measured Frequency Measured Frequency Measured Frequency SUPPLY (℃) Frequency Drift Frequency Drift Frequency Drift Frequency Drift (V) (MHz) % (MHz) % (MHz) % (MHz) % 50 DC3.7V 13.56002 0.00015 13.56002 0.00015 13.56002 0.00015 13.56002 0.00015 40 DC3.7V 13.55996 -0.00029 13.55996 -0.00029 13.55996 -0.00029 13.55996 -0.00029 30 DC3.7V 13.55998 -0.00015 13.55997 -0.00022 13.55997 -0.00022 13.55997 -0.00022 20 DC3.7V 13.56006 0.00044 13.56007 0.00052 13.56005 0.00037 13.56006 0.00044 10 DC3.7V 13.56003 0.00022 13.56003 0.00022 13.56003 0.00022 13.56003 0.00022 0 DC3.7V 13.56002 0.00015 13.56002 0.00015 13.56002 0.00015 13.56002 0.00015 -10 DC3.7V 13.56005 0.00037 13.56006 0.00044 13.56006 0.00044 13.56005 0.00037 -20 DC3.7V 13.56001 0.00007 13.56001 0.00007 13.56001 0.00007 13.56001 0.00007 FREQUEMCY STABILITY VERSUS VOLTAGE 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE TEMP. POWER Measured Frequency Measured Frequency Measured Frequency Measured Frequency SUPPLY (℃) Frequency Drift Frequency Drift Frequency Drift Frequency Drift (V) (MHz) % (MHz) % (MHz) % (MHz) % 20 DC3.7V 13.56006 0.00044 13.56007 0.00052 13.56005 0.00037 13.56006 0.00044 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 23 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.4. 20dB BANDWIDTH 4.4.1 LIMITS OF 20dB BANDWIDTH The 20dB bandwidth shall be specified in operating frequency band.(13.11MHz – 14.01MHz) 4.4.2 TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Power Sensor Keysight U2021XA MY55060016 Jun. 13,18 Jun. 12,19 Power Sensor Keysight U2021XA MY55060018 Jun. 13,18 Jun. 12,19 Power Meter Anritsu ML2495A 1139001 Apr. 13,18 Apr. 13,19 Power Sensor Anritsu MA2411B 1531155 Apr. 13,18 Apr. 13,19 Digital Multimeter FLUKE 15B A1220010DG Oct. 21, 18 Oct.20, 19 Humid & Temp Haida HD-2257 110807201 Sep.05,18 Sep. 04,19 Programmable Tester Oscilloscope Agilent DSO9254A MY51260160 Nov. 08,18 Nov. 07,19 Signal Analyzer Rohde & Schwarz FSV7 102331 Nov. 08,18 Nov. 07,19 Signal Generator Agilent N5183A MY50140980 Jan. 02,18 Jan. 01,19 Agile Signal Agilent 8645A Agilent Sep.01, 18 Aug.31, 19 Generator Spectrum Analyzer Keysight N9020A MY55400499 Mar. 21,18 Mar. 20,19 MXG-B RF Vector Keysight N5182B MY56200288 Jan. 02,18 Jan. 01,19 Signal Generator BLUETOOTH Rohde&Schwarz CBT32 100811 Jul.06, 18 Jul. 05, 19 TESTER Attenuator MINI BW-S10W2+ S130129FGE2 N/A N/A DC Source Keysight E3642A MY56146098 N/A N/A NOTE: 1. The test was performed in RF Oven room. 2. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 24 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.4.3 TEST PROCEDURE a. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. c. Measure the frequency difference of two frequencies that were attenuated 20dB from the reference level. Record the frequency difference as the emission bandwidth. d. Repeat above procedures until all frequencies measured were complete. 4.4.4 DEVIATION FROM TEST STANDARD No deviation. 4.4.5 TEST SETUP EUT SPECTRUM 10dB ATTENUATION ANALYZER PAD No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 25 of 28 Report Version 1

Test Report No.: RF18031N010-2 4.4.6 EUT OPERATING CONDITION The software provided by client to enable the EUT under transmission condition continuously at one channel frequencies individually. 4.4.7 TEST RESULTS CHANNEL CHANNEL FREQUENCY (MHz) 20dB BANDWIDTH (KHz) 1 13.56 29.81 Lower & Upper Test Frequency Point Test Frequency P/F (MHz) (MHz) Lower 13.54509 PASS Upper 13.57491 PASS No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 26 of 28 Report Version 1

Test Report No.: RF18031N010-2 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 27 of 28 Report Version 1

Test Report No.: RF18031N010-2 6. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. ---END--- No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 28 of 28 Report Version 1


Document Created: 2018-12-10 15:58:16
Document Modified: 2018-12-10 15:58:16
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC