User manual

FCC ID: 2AEIN-BVML9384

Users Manual

Download: PDF
FCCID_2657123

2—WAY ANDROID CONTROL* / 1—WAY iPhone® CONTROL** BLUETOOTH®—ENABLED DVD/MP3/CD AM/FM RECEIVER FEATURING 6.2" (157mm) WIDESCREEN TOUCHSCREEN DIGITAL TFT MONITOR

Safety Precautions Thank you for purchasing this product. Do not change the fuse on the power Please read through these operating cord without professional guidance. Using instructions so you will know how to an improper fuse may cause damage to operate your model properly. Please keep this unit or even cause fire. this manual in a safe place for future reference. Only connect the unit to a 12-volt power supply with negative grounding. Please contact your nearest dealer if one of the following is experienced: Never install this unit where operating it may impair safe driving conditions. (a). Water or other objects enter the unit. (b). There is smoke. (c). Peculiar smell. To ensure safe driving, please adjust the Never use the front video display function volume to a safe and comfortable level in when driving, so as to prevent violating case of emergency situations. traffic regulations or causing an accident. Never expose this unit, amplifier, and speakers to moisture or water to prevent electric sparks or fire. 1

Safety Precautions 1. Never disassemble or adjust the unit without FCC Statement any professional guidance. 1. T his device complies with Part 15 of the For details, please consult any professional FCC Rules. car shop / dealer for inquiry. Operation is subject to the following two 2. If the front panel or TFT monitor is dirty, conditions: please use a clean silicone cloth and neutral (1) This device may not cause harmful detergent to wipe off the spot. Using a rough interference. cloth and non-neutral detergent such as (2) This device must accept any interference alcohol for cleaning may result in scratching received, including interference that may or decoloration to the monitor. cause undesired operation. 3. If any abnormal behavior of the unit is 2. C hanges or modifications not expressly found, please refer to trouble shooting guide approved by the party responsible for of this manual. If no relevant information is compliance could void the user’s authority found, please press the [RESET] key on the to operate the equipment. front panel to resume factory default. NOTE: This equipment has been tested 4. If you have parked the car in hot or cold and found to comply with the limits for a weather for a long time, please wait until Class B digital device, pursuant to Part the temperature in the car becomes normal 15 of the FCC Rules. These limits are before operating the unit. designed to provide reasonable protection 5. U sing the car heater in low temperature against harmful interference in a residential environment may result in moisture inside installation. the unit, DO NOT use the unit in this This equipment generates uses and can situation. Eject the disc and wipe off the radiate radio frequency energy and, if not moisture on the disc. If the unit still doesn't installed and used in accordance with the work after a few hours, please contact the instructions, may cause harmful interference service center. to radio communications. However, there 6. Do not impact the LCD monitor which could is no guarantee that interference will not cause damage. occur in a particular installation. If this 7. T o prevent damage to the screen, avoid equipment does cause harmful interference touching it with sharp objects. to radio or television reception, which can 8. To provide a clear demonstration and an be determined by turning the equipment alternative for easy understanding to the off and on, the user is encouraged to try to operation of this unit, graphic illustrations correct the interference by one or more of are used. the following measures: However, some illustrations are different • Reorient or relocate the receiving antenna. from the actual images displayed on the • Increase the separation between the screen. equipment and receiver. 9. Operate the unit correctly according to this • Connect the equipment into an outlet on manual to prevent unnecessary problem. a circuit different from that to which the The guarantee won't be valid if the problem receiver is connected. is caused by inappropriate operation. • Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body. 2

Contents Safety Precautions....................................1 Image playback.....................................16 Before Using..............................................4 Bluetooth Mode.......................................17 Front Panel..............................................4 Pairing Bluetooth Enabled Devices.......17 Remote Control.......................................5 Disconnecting a Bluetooth Device.........17 Notes on Remote Control Usage.............5 Make a Call............................................17 Receiving a Call.....................................18 Basic Operations.......................................6 Adjust Bluetooth Settings......................18 Power On / Off.........................................6 Bluetooth Music Function......................18 Playing Source Selection.........................6 Mute.........................................................6 iPod/iPhone Operations..........................19 Volume Adjustment.................................6 Accessing iPod mode............................19 Audible Beep Confirmation......................6 Pausing play..........................................19 Parking Brake Inhibit...............................6 Selecting a track....................................19 Adjusting Equalizer Controls...................6 Fast forward/Fast backward..................19 Equalizer (EQ).........................................6 Repeat play...........................................19 Adjusting the Fader and Balance............7 Random play.........................................19 Search function......................................19 Basic Operations.......................................7 About SmartLink....................................20 Settings......................................................8 About HDMI...........................................20 System Settings.......................................8 Connect with Android Phone.................20 General Settings......................................8 Connect with iPhone..............................20 Calibration...............................................8 Setting...................................................21 SWC Programing.....................................8 Limitations.............................................21 Audio Settings.........................................9 Other Modes.............................................22 Time Settings...........................................9 Aux Front and A/V Rear Controls..........22 Settings......................................................9 Aux Front ..............................................22 Language Settings.................................10 A/V Rear................................................22 Video Settings.......................................10 Reset.....................................................22 Adjust Volume Settings.........................10 Replace a Fuse.....................................22 Rear Camera Operation........................22 Settings....................................................10 Specifications..........................................23 Radio Mode..............................................11 Select Radio as Playing Source............11 Troubleshooting......................................25 Select One Radio Band.........................11 Wire Connections....................................26 Tune......................................................11 Preset Station........................................11 Local radio station seeking....................11 EQ Selection..........................................12 PTY Function.........................................12 Playback Mode........................................13 Basic information...................................13 Insert a disc...........................................13 Eject a Disc............................................13 Touch Screen Controls..........................13 Controlling Playback..............................13 Connecting the USB Device..................13 Removing the USB Device....................13 Inserting the SD card.............................13 Removing the SD card..........................14 DVD movie playback.............................14 Audio playback......................................14 Video playback......................................15 3

Before Using Front Panel 11 10 9 Notice: The graphics in this manual are for reference purposes only and may differ somewhat from the actual unit. 1. [ ] Button Press to eject a disc. 2. [MENU] Button Press to display the main menu 3. Rotary/pushbutton Rotate to adjust volume. Press briefly to activate the MUTE function. Press again to resume normal sound. Press and hold to turn the unit OFF. 4. [ ] Button Adjust the brightness of screen. 5. Reset Hole 6. A/V IN Socket 7. USB Socket 8. SD card reader for media. 9. Remote Sensor 10. Disc slot 11. Internal Microphone 4

Before Using Remote Control 1. Power & Mute On/Off 2. Fast forward / Station up 1 3. Eject the disc 2 4. Previous / Seek down 3 19 5. Play / Pause 18 6. Stop 4 7. Fast backward / Station down 17 5 16 8. Preset station 1. 6 9. Repeat play / Preset station 2. 7 15 10. DVD/VCD audio stream change / 8 14 Preset station 5. 9 13 11. DVD subtitle/ Preset station 6. 10 12 12. Show main menu. 11 13. CD/MP3 Random play / Preset station 3. 14. DVD/VCD root menu/ Preset station 4. 15. DVD title. 16. Adjust volume level. 17. Next / Seek up 18. Scan play / Preset scan Auto memory store (long press) 19. Select tuner band. Notes on Remote Control Usage 1. Aim the remote control at the remote sensor on the unit. 2. Replace the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3.DO NOT store the remote control in direct sunlight or in a high temperature environment, as it may not function properly. 4. The battery can last up to for 6 months in normal conditions. If the remote control does not work, please change the battery. 5. Use“button shaped” lithium battery“CR2025”(3V) only. 6. DO NOT recharge, disassemble, heat or expose the battery to fire. 7. Insert the battery in the proper direction according to the ( + ) and ( - ) poles. 8. Store the battery in a place where it cannot be reached by children to avoid the risk of accident. Replacing the lithium battery When the range of operation of the card remote control becomes short or no function, replace the lithium battery with a new one. Make sure the battery polarity replacement is correct. (CR2025) 1. Pull out the battery holder while pressing the stopper. 2. Insert the button-type lithium battery with the (+) mark facing upward. Insert the battery holder into the remote control. 1 2 5

Basic Operations Power On / Off Volume Adjustment Press the volume knob on the unit or [ ] on To increase or decrease the volume level, turn the remote control to turn the unit ON. The the knob on the front panel or press [ + ]/[ - ] buttons on the front panel light up and the on the remote control. The volume range is current mode status appears on LCD. from “0” to “40”. The TFT screen displays the Press and hold the knob or [ ] on the remote volume level for 3 seconds. control to turn OFF the unit. Playing Source Selection Audible Beep Confirmation An audible beep tone confirms each function Press the [ MENU ] button on the front panel selection. The Beep tone can be disabled or [ SRC ] on the remote control to display the through the Setup menu. playing source menu. 5 6 Parking Brake Inhibit •  When the “BRAKE” wire is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is applied. •  Parking brake function is overridden when the video source is set to REVERSE. •  When the parking brake inhibit is active, the front monitor displays “Warning!!! Video Is Disabled For Your Safety”, preventing the driver from watching content while driving. 1 2 3 4 1 Rear video screens are not affected. 1.  or : Touch to view the previous or next page of playing sources. Adjusting Equalizer Controls 2. P laying source icon: touch to access The Equalizer adjustment screen allows corresponding work mode. the user to easily adjust the audio system 3. Time status. to meet the acoustical characteristics of the 4. Wallpaper vehicle depending on vehicle type and cabin 5. Bluetooth status. dimensions. 6. Date. For example: proper setting of the audio controls can improve the speakers frequency response. Mute Press the volume knob on the front panel The Balance/Fade levels also adjusted through or press [ MUTE ] on the remote control to the Equalizer adjustment screen. mute the volume from the unit. Press again to restore the volume. Adjusting the volume or Equalizer (EQ) using any of the audio setup features cancels Touch the Equalizer [ ] icon to view and the mute function. select a desired acoustical preset level ( Optimal / Classic / Rock / Jazz / Techno / Pop or User). 6

Basic Operations Subwoofer This feature is used to reduce or increase the subwoofer sound level. Touch the [ ]/[ ] icons to adjust the subwoofer volume from -8 to +8. This setting will vary depending on the input level setting of your subwoofer amplifier. To exit the Balance/Fader touch the return icon on the top left corner of the screen. NOTE:  NOTE:  The equalizer will automatically change to The EQ mode will change to ‘User’ “USER” when individual audio functions are automatically when you adjust the frequency adjusted. value in all modes besides ‘User’. Adjusting the Fader and Balance The user can adjust front/rear fader settings, L/R balance settings, and subwoofer levels here. 1. E nter the EQ setup mode. 2. Touch the [ ] icon in the EQ interface menu. Balance This feature is used to balance the audio output levels between the left and right side of the vehicle. Touch the [ ] / [ ] icons to change the balance control settings -14 (Left) to +14 (Right).The setting can also be changed by touching screen within the grid to move the blue sphere. Fader This feature is used to fade the audio output levels between the front and rear of the vehicle. Touch the [ ] / [ ] icons to change the fade control settings -14 (Rear) to +14 (Front). The setting can also be changed by touching screen within the grid to move the blue sphere. 7

Settings System Settings 1. Press the [ MENU ] button on the front panel or [ SRC ] on the remote control to display the playing source menu. 2. Touch the Settings icon [ ] and the settings menu is displayed. General Settings 1. Touch [ ], if necessary. 2. Touch to highlight a setting to display/select an option. General Settings Options Description USA/Asia/Japan/Europe/Europe Radio Region Select one that matches your location. LW/Oirt Distance Select Local to receive only stations with extremely Radio Range Local strong signal. Turn-ON the beep sound. Each time you press a button, On Beep the unit beeps. Off Turn-OFF the beep sound. Key Color Choose the backlight color of the buttons. Calibration Start Calibrate the touch screen. Shortcut Set the shortcut. SWC Enter to SWC interface Load Factory Restore to default settings. Calibration When the touch operation is not sensitive or valid, you should calibrate the touch screen using the calibration setting function. Adjust the response positions of the touch panel as followings: 1. Touch [ Start ] to enter. 2. Touch [ Cancel ] to exit. 3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will move automatically. 4. Aim at center of [ + ], follow the path as shown in the figure. Once steps 1-5 are complete, touch [ OK ] to exit calibrating mode. SWC Programing The following controls are available for most vehicles: 1 2 3 4 5 6 Volume + Volume - Mute Next Prev Play 7 8 9 10 11 12 Home Preset + Preset - Band Source Answer Touch [ Enter ], the SWC menu will display. Up to 12 steering wheel control functions can be programmed via the built-in SWC interface. Not all functions may be supported for each vehicle. 8

Settings 1. Popular OE steering wheel functions are already pre-programmed from the factory. If your vehicle does not support the exact same functions already pre-programmed, you will need to clear / reset the SWC interface and program in the exact functions of your vehicle. To clear / reset the SWC interface, touch [ Reset ] icon. 2. To begin programming the SWC interface after it has been cleared / reset, press a number 1 ~ 12, then press a function. A check mark should appear corresponding to the number and function. Continue programming in this manner until all of the OE steering wheel control functions are completed. NOTE: Functions 1 ~ 12 must be assigned to a function on the OE steering wheel. For example, if the OE steering wheel does not support Preset + and Preset -, then these functions must be cleared / reset in order for the other functions to work correctly. 3. To “learn” the programming completed in step 2 above, touch the [ Learn ] icon. You will then be prompted to push each button on the OE steering wheel (for 1 second), so the unit can learn the corresponding function. 4. SWC learning / programming is now complete. 5. Touch [ ] to exit. Audio Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Audio Settings Options Description On Turn On the subwoofer. Subwoofer Off Turn Off the subwoofer 80Hz Select a crossover frequency to set a cut-off frequency for the subwoofer’s LPF Subwoofer Filter 120Hz (low-pass filter). 160Hz On Turn On the loudness Loudness Off Turn Off the loudness Time Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Time Settings Options Description Date Y/M/D Touch [ ] or [ ] to set year, month and day. Clock Format 24Hr/12Hr Touch [ 24Hr ] or [ 12Hr ] to switch clock mode. Time H/M Touch [ ] or [ ] to set hour and minutes. NOTE: When date/time is set, touch [ Save ] to confirm or [ Cancel ] to exit. 9

Settings Language Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Language Settings Description OSD Language Select on-screen display language. DVD Audio Select DVD audio language. Options available depending on DVD disc. DVD Subtitle Select DVD subtitle language. Options available depending on DVD disc. DVD Menu Select DVD menu language. Options available depending on DVD disc. Video Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Video Settings Options Description Full Aspect Ratio Adjust aspect ratio. Normal On Disable video when driving. Parking Off Enable video when driving. Password Set password to restrict the play of discs. The default password is 0000. 1 Kid Safe Acceptable for children. 2G Acceptable for general viewers. 3 PG Parental guidance suggested. 4 PG13 Unsuitable for children under age 13. Rating 5 PG-R Recommend parents to restrict viewing for children under 17. 6R Restricted re-parental guidance is advised for children under the age of 17. 7 NC-17 Unsuitable for children under age 17. 8 Adult Acceptable for adults only. Adjust Enter Touch [ + ] or [ - ] to adjust brightness, contrast and saturation. Version Info Enter Display the current version information Adjust Volume Settings You can set different volumes for different sources. 1. Touch the [ ] icon to display and access the volume setting sub-menu 2. Touch the source to be adjusted. 3. The volume range is from “00” to “06” When switching to the source, the volume increases automatically. 4. Touch blank area to close the sub-menu and touch the upper left corner icon [ ] to exit setting menu. 10

Radio Mode Select Radio as Playing Source Tune Open the Source Menu and then touch [Radio]. Auto Tuning Press [ ] / [ ] on the remote control or 2 1 touch [ ] / [ ] icons on the user interface to seek a higher / lower station. To stop searching, repeat the operation above or press other keys having radio functions. 3 NOTE: When a station is received, searching stops 4 and the station is played. Manual Tuning 5 Method 1: Press the [ ]/[ ] on the remote control or 6 7 8 9 10 touch [ ] / [ ] icon on the user interface for more than 1 second to enter Manual Tuning mode. During manual tuning, the frequency will be changed in steps. Method 2: 11 1. T ouch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch 12 numbers to input frequency. 2. Touch [ ] to delete the input numbers 13 step by step. 3. Touch [ OK ] to enter. 14 15 16 17 10 1. Current radio band indicator. Preset Station 2. Return to home menu. The unit has 5 bands, such as FM1, FM2, 3. Current station frequency. FM3, AM1, AM2, and each band can store 6 4. Preset stations list. stations; hence the unit can store 30 stations in 5. Shortcut. total. 6. Band switch. Search Stations Automatically 7. Tune backward. Touch the search icon [ ] to search stations 8. Auto searching. and store the 6 strongest stations in the current 9. Tune forward. band automatically. 10. Opening/closing the options menu. 11. Enter frequency directly. Manual Store 12. Enter EQ menu. 1. Tune to a desired station. 13. To turn On or Off “AF” function. 2. Touch and hold one of the presets (1 to 6) 14. Choose local or distant seeking mode. to save the selected station. 15. To turn On or Off “TA” function. 16. To show PTY list. Recalling a Station 17. T o t u r n O n o r O f f “ C l o c k T i m e ” 1. Select a band. 2. Touch an on-screen preset button to select synchronization function. the corresponding stored station. Select One Radio Band Touch the [ Band ] icon on the user interface Local radio station seeking to select one radio band among FM1, FM2, When the Local function is on, only radio FM3, AM1 and AM2. stations with a strong local radio signal are played. To activate the Local function in the 11

Radio Mode AM/FM tuner mode, touch [ ] on the screen. TA (Traffic Announcements Identification) The Options tab is revealed. Touch [ ] Radio announcements on traffic conditions icon and choose the Radio Local or Distance. When TA function is turned on, the TA When the Local function is active, the “Local” indicator will display on the screen. indicator on the screen is illuminated. When When traffic announcement is received, the the Distant function is active, the “Distance” unit will temporarily switch to the tuner mode indicator on the screen is illuminated. (regardless of the current mode) and begin broadcasting the announcement at TA volume EQ Selection level. After the traffic announcement is over, Press the [ ] icon and enter the EQ setup. it will return to the previous mode and volume level. When TA is turned on, SEEK, SCAN, RDS Basics AMS function can only be received or saved RDS (Radio Data System) transmits data to when traffic program identification (TP) code is the radio which displays information such as received. station identification, song artist, and song title. RDS service availability varies with areas. Please understand if RDS service is not PTY Function available in you area, the following service is  TY is the abbreviation for Program Type P not available. which is a code defining the type of program being broadcast (e.g. News or Rock). Then PTY options will display on the screen. AF Function To view more PTY options, touch the scroll bar AF (Alternative Frequency): When the radio and arrows on the screen. signal strength is poor, enabling the AF W hen one PTY option is touched (e.g. function will allow the unit to automatically News), auto search for next available PTY search another station with the same PI by increasing tuning frequency until the PTY (program identification) as the current station of the next station matches the current. If no but with stronger signal strength. matched PTY has been found, the unit will AF On: AF function is activated. return to the original radio frequency. AF Off: AF function is disabled. Remark: AF indicator on LCD will flash until RDS information is received. If RDS service is not available in your area, turn off the AF mode. CT (Clock Time) Some stations broadcast the time and date within the encoded RDS signal. The clock time is automatically adjusted when ‘CT’ is set to ‘ON’. NOTE:  Stations broadcasting close to time zones may not broadcast the correct time in your particular area. In this case, turn CT Off and manually set the time. TA Function Some RDS FM stations periodically provide traffic information. TP (Traffic Program Identification) Broadcasting of traffic information 12

Playback Mode Basic information D: Time display This system will play the following types of E: Display onscreen control menu discs: The car sound system can be used to play audio DVDs/CDs and DVD/CD-R/RWs with Controlling Playback audio or MP3 files as well as MP3 or WMA To access the on-screen controls, touch the files on USB stick and SD cards. screen anywhere except for the upper left corner and touch again to cancel display. In addition, you can view movies and images Touch [ ] to view all function icons. from DVDs/VCDs/CDs, USB stick and SD cards on the display. For safety reasons, the playback of movies and Connecting the USB Device images on the integrated monitor is allowed 1. Open the USB door. only while the vehicle is standing and the hand 2. C onnect an USB device into the USB brake is applied. The “PARKING” cable must connector. be connected with the hand brake connection Play starts automatically. of the vehicle (see Connection diagram at the end of these instructions). NOTES: 1. If there are audio files supported on the NOTE: USB stick, the system will enter the audio This unit is designed to play pre-recorded files menu automatically. (original) DVDs/VCDs/CDs. Some burned If there are no audio files, but there are DVDs/VCDs/CDs may not play due to different video files supported on the USB stick, recording formats. the system will enter the video files menu automatically. If there are no audio or video files, but there Insert a disc are picture files supported on the USB stick, Upon inserting a disc, the unit will switch to the system will enter the picture files menu [Disc] mode automatically. automatically. If there no above audio/video/picture files supported in the USB stick, the screen will Eject a Disc display “Load Error!”. Press the [ ] key on the front panel or [EJECT] 2. Not all USB devices are compatible with the on the remote control to eject the disc. unit. Touch Screen Controls Removing the USB Device The touch key areas for DVD playback are 1. Select another source in the main menu. outlined below: 2. Remove the USB device. A B C D Inserting the SD card 1. Open SD card cover. 2. Insert the SD card into the SD card slot. Play starts automatically. E NOTES: 1. If there are audio files supported on the SD A: Return to the main menu card, the system will enter the audio files B: Disc type menu automatically. C  :P  lay the video and display playback If there are no audio files, but there are information video files supported on the SD card, the system will enter the video files menu 13

Playback Mode automatically. Tap on [ ] to display additional operating If there are no audio or video files, but there options of the playback menu. are picture files supported on the SD card, the system will enter the picture files menu automatically. If there no above audio/video/picture files supported in the SD card, the screen will display “Load Error!”. 2. Not all SD cards are compatible with the unit. Removing the SD card 1. Select another source in the main menu. 2. Press the card until you hear a click sound. 3. Remove the SD card. 6. Select playback language (only if supported by the DVD). 7. Display equalizer. 8. Return to menu. DVD movie playback 9. Start and end REPEAT function. The car sound system can play video DVDs Repeat mode: and VCDs. After inserting the DVD, the Repeat Chapter → Repeat Title → Repeat playback starts automatically. All → Repeat Off The DVD menu is displayed. 10. Return to title. You can navigate in the DVD menu by 11. A djust the brightness, contrast, and touching the corresponding buttons in the DVD saturation. menu on the screen. 12. Call up keypad for direct selection of titles After starting the movie via the menu of the or chapters. DVD, the movie is displayed. The playback 13. S elect playback audio channel (only if menu for DVDs is hidden. supported by the DVD). NOTE: Briefly touch the screen once to display the playback menu again. The playback menu is shown. Audio playback from DVD/CD, USB or SD The principles of audio playback (MP3/WMA) from data carriers are identical for all sources. Select the desired source via the main menu. The device changes to the desired source and the playback starts. If the playback does not start with the audio playback, touch the [ ] icon to change to the folder/file list. Touch the [ ] icon to display all the folders and files of the data carrier. 1 - Or - Press the [ ] icon to display all the audio 1. Shortcut. files of the data carrier. 2. Stop playback, call up home menu. 3. Select previous chapter. 4. Pause playback and continue playback. 5. Select next chapter. 14

Playback Mode 8. Shuffle playback. 9. Display keypad to directly enter the number of the desired title. Video playback from DVD/CD, USB or SD Select the desired source via the main menu. The device changes to the desired source and the playback starts. After starting a title, the playback menu is If the playback does not start with the video displayed. playback, touch the [ ] icon to change to the folder/file list. Touch the [ ] icon to display all the folders and files of the data carrier. - Or - Touch the [ ] icon to display all the audio files of the data carrier. If you selected a movie, the playback is started. During the movie playback, the playback menu is hidden. Briefly touch the screen once to display the playback menu again. 1 The playback menu is shown. 1. Shortcut. 2. Display the folder/file list. 3. Short press: Previous track. Long press: Fast backward. 4. Pause playback and continue playback. 5. Short press: Next track. Long press: Fast forward. Tap on [ ] to display additional operating options of the playback menu. 1 1. Shortcut. 2. Display the folder/file list. 3. Short press: Previous movie. Long press: Fast backward. 4. Pause playback and continue playback. 5. Short press: Next movie. Long press: Fast forward. 6. Display equalizer. 7. Start and end REPEAT function. Repeat mode: Repeat One → Repeat Folder → Repeat All → Repeat Off 15

Playback Mode Tap on [ ] to display additional operating options of the playback menu. 1 1. Shortcut. 2. Display the folder/file list. 3. Previous image. 6. Select playback language. 4. Pause playback and continue playback. 7. Display equalizer. 5. Next image. 8. Start and end REPEAT function. Repeat mode: Tap on [ ] to display additional operating Repeat One → Repeat Folder → Repeat All options of the playback menu. → Repeat Off 9. A d j u s t t h e b r i g h t n e s s , c o n t r a s t , a n d saturation. 10. D isplay keypad to directly enter the number of the desired title. 11. Select playback audio channel. Image playback from DVD/CD, USB or SD Select the desired source via the main menu. The device changes to the desired source and the playback starts. 6. Zoom in/out. If the playback does not start with the image 7. Rotate images . playback, touch the [ ] icon to change to 8. A d j u s t t h e b r i g h t n e s s , c o n t r a s t , a n d the folder/file list. saturation. Touch the [ ] icon to display all the folders 9. Display keypad to directly enter the number and files of the data carrier. of the desired title. - Or - Touch the [ ] icon to display all the images of the data carrier. If you selected a image, the playback is started. During the playback, the playback menu is hidden. Briefly touch the screen once to display the playback menu again. The playback menu is shown. 16

Bluetooth Mode The user can make or receive phone calls BT radio. Pressing the “Wastebin” icon next to with Bluetooth enabled phones through the a device’s name will unpair the phone from the unit. The user can also listen to music from a unit. Bluetooth enabled device. Pairing Bluetooth Enabled Devices To connect your Bluetooth phone to the unit, the user needs to pair the phone to the unit. Pairing needs only to be done once. The user can pair up to five phones. The user can search for Bluetooth head units by mobile phone. 1. T urn ON the Bluetooth function on the NOTES device. • The device will be disconnected when the 2. S earch for Bluetooth devices by mobile device is moved beyond the operational phone. range. 3. S elect the “Bluetooth device ID” in the • If you want to reconnect the device to the pairing list. unit, place it within the operational range. 4. Enter default password “0000” if necessary. • If you do not want to reconnect the device to the unit automatically, touch [ ], then set [ Auto Connect ] to [ OFF ].  F or details, see the “Adjust Bluetooth Settings” section. • Touch and hold [ ] to clear all the inputs. Make a Call 1. Select Bluetooth function in the home menu. 2. O n Option page, see the “Phone Synch” NOTES: item, and press “Synch” to synchronize the • The operational range between this unit phone book with the BT. If you have many and a Bluetooth device is approximately 5 contacts, this may take up to 3-4 minutes. meters. 3. Search for phone number from the following • Before you connect a Bluetooth device list: to this unit, familiarize yourself with the [Phone Book] Bluetooth capabilities of the device. [Call History] • Compatibility with all Bluetooth device is not [Missed calls] guaranteed. [Received calls] • Any obstacle between this unit and a [Dialed calls] Bluetooth device can reduce the operational range. • K e e p t h i s u n i t a w a y f r o m a n y o t h e r electronic device that may cause interference. Disconnecting a Bluetooth Device To disconnect one device, touch [ ]. After pressed, the unit will display a screen listing paired devices. Pressing the Green “Plug” icon Or touch the number pad directly, then touch will reconnect a previously paired phone to the [ ] to dial. 17

Bluetooth Mode Receiving a Call Bluetooth Music Function By default, all incoming calls are received Bluetooth provides an Advanced Audio automaticaly. Distribution Profile (A2DP) profile for streaming 1. If there is an incoming call, the screen will music from a mobile phone, sometimes display incoming call number. referred to as a MP3 player. The unit allows 2. Touch the screen to select [ ] or [ ]. you to play back audio files from your mobile Speak into the Bluetooth microphone. phoneusing a Bluetooth connection. NOTE: 1 • You can select to receive calls manually by setting [Auto Answer] to [OFF] 1. Shortcut. 2. Previous track. 3. Pause playback and continue playback. Adjust Bluetooth Settings 4. Disconnect connection with current device. In the options menu for Bluetooth, you can 5. Next track. make the basic settings for the Bluetooth 6. Display equalizer. mode. NOTE: Touch the [ ] icon. Please quit A2DP mode before attempting to The options menu is displayed. make a phone call, as unexpected results may occur depending on your mobile phone model. AVRCP is short for Audio/Video Remote Control Profile. Mobile phones supporting this function can control the playback of a Bluetooth audio player. The unit can control a Bluetooth audio player via Advanced Audio Distribution Profile (A2DP) or Audio/Video Remote Control Profile (AVRCP). Bluetooth audio players (or Bluetooth To turn the “Bluetooth” function Bluetooth adapters) compatible with these ON or OFF. profiles can be connected to this unit. Auto Connect To turn the “Auto Connect” While listening to music from any source, the function ON or OFF. user can make a phone call by pressing the Auto Answer To turn the “Auto Answer” number keys on the mobile phone. The unit will function ON or OFF. stop playing music, after the call received, the Pin Code To set the paring code. voice will be transferred to the unit. When the Phone Synch To synchronize phone book, call ends, the screen will display music playing touch [ OK ] on the sub-menu Phonebook menu. Synch may take seve ral minute s to load on If there is an incoming phone call, the music initial setup. will stop, when the call ends, the screen will display music playing menu. 18

iPod/iPhone Operations This unit supports only the following iPod/iPhone models: · iPhone 5s · iPhone 5c · iPhone 5 · iPhone 4s · iPhone 4 · iPod touch (5th generation) · iPod touch (4th generation) · iPod classic · iPod nano (7th generation) · iPod nano (6th generation) · iPod nano (5th generation) “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. Accessing iPod mode Fast forward/Fast backward Connect an iPod or iPhone to the USB Fast forward connector via an iPod cable. Touch and hold the [ ] icon . Fast backward Touch and hold the [ ] icon . Repeat play This function allows you to play the track repeatedly. Touch the [ ] icon to select Repeat one or Repeat all. Random play Touch [iPod] on the main menu to enter iPod This function allows you to play all tracks menu. recorded in a random order. Touch the [ ] icon to perform random play. Pausing play If the icon isn’t on current screen, touch [ ] 1. Touch the [ ] icon on the bottom of the screen button to find it. to pause play. [ ] appears on the screen. Search function 2. Touch [ ] icon again to resume play. 1. Touch the [ ] icon to enter search menu. 2 Input number, then touch [ OK ] to begin Selecting a track searching. Track-up Touch [ ] icon to delete inputted Touch the [ ] icon to move to the beginning number. of the next track. Track-down 1. Touch the [ ] icon to move back to the beginning of the current track. 2. Touch the [ ] icon twice to move back to the beginning of the previous track. 19

SmartLink Open the Source Menu and then touch Connect with Android Phone [ SmartLink ] to enter SmartLink menu. 1. How to get SmartLink APP Method1: Scan the QR code on the screen of the car device with your Android phone to download and install “SmartLink” APP. Method 2: Download and install SmartLink from Google Play. 2. Cable connection Connect your Smartphone with this system via appropriative cable(sold separately). (Some Samsung phones adaptor cable interface is different to others) 3. BT Connection Scan for Bluetooth devices and select this About SmartLink system for connection. SmartLink is the function about interconnecting 4. Touch panel calibration information between the smart phone and the D i a l o g b o x w i l l b e s h o w n o n y o u r car device. smartphone when connection between By SmartLink, you can synchronize the screen Smartphone and this system via BT. Click from your smart phone to the car device. “OK” on the dialog, and then touch panel And you can also control your phone by the car calibration procedure will be run on this device, such as receiving calls, dialing calls, system. Calibration should be made for listening to the music and watching movies horizontal display case and vertical display or pictures from your phone, as well using case of your smartphone. navigation from the smart phone to the screen of the car device. The function of the SmartLink depends on the Connect with iPhone configuration of your smart phone. 1. Assistive Touch Setting Make sure that the “Assistive Touch” option in your iPhone Settings is set to “off” status, and refer to setp 4 to access the “Assistive About HDMI Touch” setting option. To active the SmartLink function, you need to 2. HDMI Connection connect your smartphone to the car device’s Connect you iPhone with this system via HDMI connector via appropriative cable(sold HDMI cable(sold separately). separately). For iPhone 5 or above: To connect HDMI HDMI (High-Definition Multimedia Interface) use the Apple Lightning Digital AV Adapter. is a proprietary audio/video interface for 3. BT Connection transferring uncompressed video data and Pair your iPhone with this System, after compressed or uncompressed digital audio the bluetooth connection was established. data from an HDMI-compliant source device, A circle will be show on the screen of such as a display controller, to a compatible your iPhone if the SmartLink is launched computer monitor, video projector, digital successfully. television, or digital audio device. 4. Setting Set up following options with the path of your iPhone: Settings → General → Accessibility → Assistive Touch, set the below options as: “Always Show Menu” → set to “On”. “TRACKING SPEED” → set to “full speed”. NOTE: In the case of iPhone(6/6+), to ensure MI HD HDMI HDM I HDMI accurate calibration, please set up the following option: 20

SmartLink Settings → Display&Brightness → View → Zoomed. Setting Touch [ Setting ] icon to display the following option: Screen Rotation(iphone only) Select the screen’s landscape direction based on your preference. The default setting is Right landscape. Version Displaying the device version Limitations 1. SmartLink can’t work if car-unit or phone is Off or in inappropriate operation. 2. SmartLink can’t work if operated in a wrong way or without specified adaptor or wiring. 3. Wireless communication could be shortly influenced for some phones which can cause impact on SmartLink. 4. Inappropriate phones or systems can cause impact on SmartLink. 5. If no specified versions of app in phone or can’t match with the versions of app in car- unit can cause impact on SmartLink. 6. S m a r t L i n k c a n l i m i t e d t o t h i r d - p a r t y software. (IOS or Android systems upgrade, treaty of phone port changed, navigation systems upgrade or the treaty changed.) 7. SmartLink can’t work if PIN code is needed when starting Wi-Fi. 8. Wire or wireless communication is upset by weather, busy lines, capacitance, device, and so on, which may cause influence on SmartLink. 9. P ower system and the structure of your car, car-unit, phone, or damaged wiring can cause impact on SmartLink. 10.  S martLink can’t work without available signal or normal system. 11.  The dpi of phone may cause little deviation when you control phone with car-unit. NOTE: No liability shall be assumed for cases described above. 21

Other Modes Aux Front and A/V Rear Controls Replace a Fuse Aux Front If there is no power, the fuse may be damaged Aux Front is used for playback of audio/video and need to be replaced. from an external device connected to the unit 1. Remove the unit from the dashboard. through a 3.5mm jack located on the front 2. Check all electrical connections. panel. 3. Buy a fuse that matches the amperage of the damaged fuse. A/V Rear 4. Replace the fuse while the unit is powered A/V Rear is used for playback of audio/video off. from an external device connected through RCA connectors located on the back of the unit. Rear Camera Operation You can connect an external audio/video This unit is “camera ready.” Before accessing device to the unit. any camera features, you must install a rear 1. C onnect the external device with the video camera (sold Separately). supplied AV cable. When the camera is installed, the rear view 2. Touch the upper left corner to display the image of what is behind the vehicle will appear main menu. when the vehicle is placed in reverse gear. 3. Touch [Aux Front] / [A/V Rear] to access When leaving reverse gear, the unit displays external device. the previous screen. NOTES: 1. Audio/Video device must be connected to the unit using an audio/video adapter cable that is available separately. 2. Video will only play when the vehicle parking brake is engaged. The parking brake must be connected for this feature to operate. Reset When the unit hangs up, you can reset it, press [ RESET ] with a ball-point pen or similar tool. Reset NOTE: When the [RESET] button is pressed, frequencies of radio stations, date, time, etc. stored in memory are cleared. 22

Specifications General Reference Supply Voltage..................................................................... 12V(DC) Operating Voltage Range.........................................................10.8 - 16.0V(DC) Max Operating Current..................................................................................15A Grounding System.................................................................................Negative Dimensions(WXHXD).................................................... 178.5X101.5X166.0mm Weight(main unit)....................................................................................... 1.8kg FM Signal Noise Ratio................................................................................. ≥55dB Residual Noise Sensitivity (S/N=30dB).............................................≤15dBμV Frequency Response (±3dB).......................................................30Hz~15KHz Station Seeking Level..................................................................... 20~28dBμV Distortion............................................................................................... ≤1.0% Stereo Separation (1KHz)..................................................................... ≥25dB Antenna Impedance....................................................................................75Ω AM Residual Noise Sensitivity (S/N=20dB).............................................≤35dBμV Selectivity (±9KHz)................................................................................ ≥50dB Screen Screen size.............................................................................. 6.2 inches(16:9) Display resolution................................................................................800X480 DVD Player S/N Ratio............................................................................................... ≥75dB THD+N.................................................................................................. ≤0.1% Frequency Response (±3dB).......................................................20Hz~20KHz Maximum Output Power..........................................................................4×80W Load Impedance............................................................................................4Ω AUX IN Distortion............................................................................................... ≤0.5% Frequency Response (±3dB).......................................................20Hz~20KHz Audio Input Level........................................................................................0.5V Preout Output Impedance.................................................................................... 10KΩ Output Level..................................................................................................3V Video Normal Video Input Level (CVBS).......................................................1.0±0.2V Video Input Impedance...............................................................................75Ω Video Output Impedance.............................................................................75Ω Video Output Level........................................................................ 1.0±0.2Vp-p Environment Operating Temperature..............................................................-20°C ~ +60°C Storing Temperature................................................................. -30°C ~ +80°C Operating Humidity.......................................................................45°C/80%RH Storing Humidity...........................................................................60°C/90%RH Notice: When the unit is operated to extremes, such as with maximum power output for a long time, or the temperature is over 70°C, it will enter heat protection mode, the volume will be reduced automatically. This is normal. 23

Specifications Supported Formats: ·USB or memory file format: FAT16,FAT32 ·Mp3 bit rate(date rate): 32-320 Kbps and variable bit rate ·Directory nesting up to a maximum of 8 levels ·Number of albums/folders: maximum 99 ·Number of tracks/titles: maximum 999 ·ID3 tag v2.0 or later ·File name in Unicode UTF8(maximum length:128 bytes) Unsupported Formates: · Empty albums: an empty album is an album that does not contain MP3 files and is not shown in the display. · Unsupported file formats are skipped. For example, Word documents(.doc) or Mp3 files with extension.dlf are ignored and not played. Supported MP3 Disc Format: ·ISO9660, Joliet ·Maximum title number: 512(depending on file name length) ·Maximum album number: 255 ·Supported sampling frequencies: 32kHz,44.1kHz,48kHz ·Supported bit-rates: 32-320Kbps and variable bit rates Supported Video Formats: ·DVD ·MPEG ·RMVB etc. Region Code According to DVD sales regions, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use. Region 1: USA, Canada, East Pacific Ocean Islands; Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East; Region 3: Taiwan of China, Hong Kong of China, South Korea, Thailand, Indonesia, South East Asia; Region 4: Australia, New Zealand, Mid & south America, South Pacific Ocean Islands/Oceania; Region 5: Russia, Mongolia, India, Middle Asia, East Europe, North Korea, North Africa, North West Asia; Region 6: China, Mainland. Precautions when using Discs 1) DO NOT use irregular shaped discs. 2) Disc cleaning: Use a dry, soft cloth to wipe the disc from center to edge, only neutral detergent can be used. 3) When playing a new disc: New discs may have some rough spots around the inner and outer edges. If such a disc is used, remove these rough spots with a pencil or ball-point pen, etc. 24

Troubleshooting What appears to be a problem is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit fuse blown. Install new fuse with correct rating. Unit does not power on Car battery fuse blown. Install new fuse with correct rating. Illegal operation Reset the unit. Improper audio output connection. Check wiring and correct. Volume set too low. Increase volume level. Speakers damaged. Replace speakers. No/low audio output Adjust the channel balance to center Heavily biased volume balance. position. Speaker wiring is in contact with metal part Insulate all speaker wiring connections. of car. Pirated disc is in use. Use original disc. Poor sound quality or Speaker power rating does not match unit. Replace speakers. distortion Wrong connections. Check wiring and correct. Speaker is shorted. Check wiring and correct. Tel-Mute malfunction MUTE wire is grounded. Check the ‘MUTE’ wiring and correct. Unit resets itself when Incorrect connection between ACC and Check wiring and correct. engine is off BATT. TFT monitor Warning information is Parking break wiring is not correct. Check wiring and correct. shown at all times The color system of DVD disc does not Adjust the color system of the DVD match the monitor. disc playing back or the monitor in use. Flashing image or interference appears on Pirated disc is in use. Use original disc. screen Video cable damaged. Replace cables. Improper video signal connections. Check wiring and correct. Disc playback Cannot insert disc A disc is already inside the unit. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. Disc does not play back Incompatible disc is used. Use compatible disc. Disc is inserted upside down. Insert disc with label side up. Disc region code is not compatible with Use disc with proper region code. unit. PBC cannot be used PBC is not available on the disc. Use disc with PBC available. during VCD playback Repeat or search function is invalid during PBC is on. Turn PBC off. VCD playback Error messages Disc is dirty. Clean disc with soft cloth. No disc Disc is upside down. Insert disc with label side up. No disc inside. Insert disc. Disc is dirty. Clean disc with soft cloth. Bad disc Disc is upside down. Insert disc with label side up. Unknown disc Disc format is not compatible with this unit. Use disc with compatible format. DVD region code is not compatible with Use disc with compatible region code. Region error this unit. 25

Wire Connections USB (charge only) HDMI Radio Antenna CAMERA IN BRAKE GND REVERSE AV-IN L AV-IN R VIDEO IN GND GND VIDEO OUT SWC 1 SWC 2 LINE OUT RL SUB OUT 2 RR+ FR+ FL+ RL+ LINE OUT RR RR- FR- FL- RL- SUB OUT 1 NC NC P.ANT B+ LINE OUT FR NC ACC ILL GND LINE OUT FL 26

USERS MANUAL BVMLI384 2—WAY ANDROID CONTROL* / 1—WAY iPhone® CONTROL** BLUETOOTH®—ENABLED | DVD/MP3/CD AM/FM RECEIVER —)3>"! AUDIO SYSTEMS BOSS Audio Systems 3451 Lunar Court « Oxnard, CA 93030 www.bossaudio.com | 805.751.4853 tech support: www.bossaudio.com/technical—support L8 *Additional cables are required based on your Androld phone **A Lightning® Digital Connection is required for display, and is only used forscreen duplication, controlis accomplished from your phone iPod®and iPhone®are registered trademarks of Apple, Inc., in the U.S. and other countries. Android is a registered trademark of Google, Inc., in the U.S. and other countries. BOSS Audio Systems is not affiliated with Apple, Inc. or Google, Inc.


Document Created: 2015-04-20 14:39:36
Document Modified: 2015-04-20 14:39:36
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC