CCISE170604402 BLE Rev. 1

FCC ID: 2AEE8LAVAR2

Test Report

Download: PDF
FCCID_3510580

Shenzhen ZhongjianNanfang Testing Co., Ltd. Report No:CCISE170604402 1 Cover Page FCC REPORT (BLE) Applicant: LAVA INTERNATIONAL (H.K) LIMITED UNIT L 1/F MAU LAM COMM BLDG 16-18 MAU LAM ST, Address of Applicant: JORDAN KL, HK Equipment Under Test (EUT) Product Name: Mobile Phone Model No.: R2 Trade mark: LAVA FCC ID: 2AEE8LAVAR2 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 08 Jun., 2017 Date of Test: 08 Jun., to 10 Jul., 2017 Date of report issued: 12 Jul., 2017 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of theCCISproduct certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery orfalsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

Report No: CCISE170604402 2 Version Version No. Date Description 00 12 Jul., 2017 Original Tested by: Date: 12 Jul., 2017 Test Engineer Reviewed by: Date: 12 Jul., 2017 Project Engineer Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 36

Report No: CCISE170604402 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 5.3 TEST ENVIRONMENT ANDMODE ............................................................................................................................. 7 5.4 MEASUREMENT UNCERTAINTY.............................................................................................................................. 7 5.5 LABORATORY FACILITY.......................................................................................................................................... 7 5.6 LABORATORY LOCATION ....................................................................................................................................... 7 5.7 TEST INSTRUMENTS LIST ....................................................................................................................................... 8 6 TEST RESULTS ANDMEASUREMENT DATA ................................................................................................. 9 6.1 ANTENNA REQUIREMENT: ...................................................................................................................................... 9 6.2 CONDUCTED EMISSION ....................................................................................................................................... 10 6.3 CONDUCTED OUTPUT POWER ............................................................................................................................ 13 6.4 OCCUPY BANDWIDTH .......................................................................................................................................... 15 6.5 POWER SPECTRAL DENSITY ............................................................................................................................... 18 6.6 BAND EDGE ......................................................................................................................................................... 20 6.6.1 Conducted Emission Method...................................................................................................................... 20 6.6.2 Radiated Emission Method ......................................................................................................................... 22 6.7 SPURIOUS EMISSION ........................................................................................................................................... 27 6.7.1 Conducted Emission Method...................................................................................................................... 27 6.7.2 Radiated Emission Method ......................................................................................................................... 30 7 TEST SETUP PHOTO ........................................................................................................................................ 35 8 EUT CONSTRUCTIONAL DETAILS ................................................................................................................ 36 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 36

Report No: CCISE170604402 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203/15.247 (c) Pass AC Power Line Conducted Emission 15.207 Pass Conducted Peak Output Power 15.247 (b)(3) Pass 6dB Emission Bandwidth 15.247 (a)(2) Pass Power Spectral Density 15.247 (e) Pass Band Edge 15.247(d) Pass Spurious Emission 15.205/15.209 Pass Pass: The EUT complies with the essential requirements in the standard. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 36

Report No: CCISE170604402 5 General Information 5.1 Client Information Applicant: LAVA INTERNATIONAL (H.K) LIMITED Address of Applicant: UNIT L 1/F MAU LAM COMM BLDG 16-18 MAU LAM ST, JORDAN KL, HK Manufacturer LAVA INTERNATIONAL (H.K) LIMITED Address of Manufacturer: UNIT L 1/F MAU LAM COMM BLDG 16-18 MAU LAM ST, JORDAN KL, HK 5.2 General Description of E.U.T. Product Name: Mobile Phone Model No.: R2 Operation Frequency: 2402-2480 MHz Channel numbers: 40 Channel separation: 2 MHz Modulation technology: GFSK Data speed : 1Mbps Antenna Type: Internal Antenna Antenna gain: 1dBi Power supply: Rechargeable Li-ion Battery DC3.8V-2700mAh AC adapter: Model: CLV-15 Input: AC100-240V 50/60Hz 0.15A Output: DC 5.0V, 1A Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 36

Report No: CCISE170604402 Operation Frequency each of channel Channel Frequency Channel Frequency Channel Frequency Channel Frequency 0 2402MHz 10 2422MHz 20 2442MHz 30 2462MHz 1 2404MHz 11 2424MHz 21 2444MHz 31 2464MHz 2 2406MHz 12 2426MHz 22 2446MHz 32 2466MHz 3 2408MHz 13 2428MHz 23 2448MHz 33 2468MHz 4 2410MHz 14 2430MHz 24 2450MHz 34 2470MHz 5 2412MHz 15 2432MHz 25 2452MHz 35 2472MHz 6 2414MHz 16 2434MHz 26 2454MHz 36 2474MHz 7 2416MHz 17 2436MHz 27 2456MHz 37 2476MHz 8 2418MHz 18 2438MHz 28 2458MHz 38 2478MHz 9 2420MHz 19 2440MHz 29 2460MHz 39 2480MHz Note: In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: Channel Frequency The lowest channel 2402MHz The middle channel 2442MHz The Highest channel 2480MHz Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 36

Report No: CCISE170604402 5.3 Test environment andmode Operating Environment: Temperature: 24.0 C Humidity: 54 % RH Atmospheric Pressure: 1010 mbar Test mode: Operation mode Keep the EUT in continuous transmitting with modulation The sample was placed 0.8m(below 1GHz)/1.5m(above 1GHz) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. Duty cycle setting during the transmission is 100% with maximum power setting for all modulations. 5.4 Measurement Uncertainty Items Expanded Uncertainty (Confidence of 95%) Conducted Emission (9kHz ~ 30MHz) 2.14 dB (k=2) Radiated Emission (9kHz ~ 30MHz) 4.24 dB (k=2) Radiated Emission (30MHz ~ 1000MHz) 4.35 dB (k=2) Radiated Emission (1GHz ~ 18GHz) 4.44 dB (k=2) Radiated Emission (18GHz ~ 26.5GHz) 4.56 dB (k=2) 5.5 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 817957 Shenzhen ZhongjianNanfang Testing Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in out files. Registration 817957, February 27, 2012. ● IC - Registration No.: 10106A-1 The 3m Semi-anechoic chamber of Shenzhen ZhongjianNanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1. ● CNAS - Registration No.: CNAS L6048 Shenzhen ZhongjianNanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. 5.6 Laboratory Location Shenzhen ZhongjianNanfang Testing Co., Ltd. Address: No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Website: http://www.ccis-cb.com Tel: +86-755-23118282 Fax:+86-755-23116366 Email: info@ccis-cb.com Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 36

Report No: CCISE170604402 5.7 Test Instruments list Radiated Emission: Inventory Cal. Date Cal. Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 3m SAC SAEMC 9(L)*6(W)* 6(H) CCIS0001 08-23-2014 08-22-2017 2 BiConiLog Antenna SCHWARZBECK VULB9163 CCIS0005 02-25-2017 02-24-2018 3 Horn Antenna SCHWARZBECK BBHA9120D CCIS0006 02-25-2017 02-24-2018 Pre-amplifier 4 HP 8447D CCIS0003 02-25-2017 02-24-2018 (10kHz-1.3GHz) Pre-amplifier Compliance Direction 5 PAP-1G18 CCIS0011 02-25-2017 02-24-2018 (1GHz-18GHz) Systems Inc. Pre-amplifier AFS33-18002 6 Rohde & Schwarz GTS218 02-25-2017 02-24-2018 (18-26GHz) 650-30-8P-44 7 Horn Antenna ETS-LINDGREN 3160 GTS217 02-25-2017 02-24-2018 Spectrum analyzer 8 Rohde & Schwarz FSP30 CCIS0023 02-25-2017 02-24-2018 9k-30GHz 9 EMI Test Receiver Rohde & Schwarz ESRP7 CCIS0167 02-25-2017 02-24-2018 10 Loop antenna Laplace instrument RF300 EMC0701 02-25-2017 02-24-2018 11 EMI Test Software AUDIX E3 N/A N/A N/A 12 Coaxial Cable N/A N/A CCIS0018 02-25-2017 02-24-2018 13 Coaxial Cable N/A N/A CCIS0020 02-25-2017 02-24-2018 Conducted Emission: Inventory Cal. Date Cal. Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 Shielding Room ZhongShuo Electron 11.0(L)x4.0(W)x3.0(H) CCIS0061 08-23-2014 08-22-2017 2 EMI Test Receiver Rohde & Schwarz ESCI CCIS0002 02-25-2017 02-24-2018 3 LISN CHASE MN2050D CCIS0074 02-25-2017 02-24-2018 4 Coaxial Cable CCIS N/A CCIS0086 02-25-2017 02-24-2018 5 EMI Test Software AUDIX E3 N/A N/A N/A Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 36

Report No: CCISE170604402 6 Test results andMeasurement Data 6.1 Antenna requirement: Standard requirement: FCC Part15 C Section 15.203 /247(c) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(c) (1)(i) requirement: (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively forfixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBiprovided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3dB that the directional gain of the antenna exceeds 6dBi. E.U.T Antenna: The BLE antennaisaninternalantennawhich cannot replace by end-user, the best case gain of the antenna is1dBi. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 36

Report No: CCISE170604402 6.2 Conducted Emission Test Requirement: FCC Part15 C Section 15.207 Test Method: ANSI C63.4: 2014 TestFrequencyRange: 150 kHz to 30MHz Class / Severity: Class B Class B Receiver setup: RBW=9kHz, VBW=30kHz Limit: Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. Test procedure 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.), which provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4: 2014 on conducted measurement. Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 36

Report No: CCISE170604402 Measurement Data: Neutral: Notes: 1. An initial pre-scan was performed on the live and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peakemission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 11 of 36

Report No: CCISE170604402 Line: Notes: 1. An initial pre-scan was performed on the live and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peakemission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 36

Report No: CCISE170604402 6.3 Conducted Output Power Test Requirement: FCC Part15 C Section 15.247 (b)(3) Test Method: ANSI C63.10:2013 and KDB558074v03r05 section 9.1.1 Limit: 30dBm Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Maximum Conducted Output Power Test CH (dBm) Limit(dBm) Result Lowest 5.35 Middle 5.89 30.00 Pass Highest 3.74 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 36

Report No: CCISE170604402 Test plot as follows: * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz 5.35 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.402110000 GHz Offset 6.5 dB 10 1 A 1 PK 0 MAXH LVL -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.402 GHz 500 kHz/ Span 5 MHz Date: 28.JUN.2017 22:53:17 Lowest channel * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz 5.89 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.442200000 GHz Offset 6.5 dB 10 1 A 1 PK 0 MAXH LVL -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.442 GHz 500 kHz/ Span 5 MHz Date: 28.JUN.2017 22:53:34 Middle channel * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz 3.74 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.480110000 GHz Offset 6.5 dB 10 1 A 1 PK 0 MAXH LVL -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.48 GHz 500 kHz/ Span 5 MHz Date: 28.JUN.2017 22:53:48 Highest channel Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 36

Report No: CCISE170604402 6.4 Occupy Bandwidth Test Requirement: FCC Part15 C Section 15.247 (a)(2) Test Method: ANSI C63.10:2013 and KDB558074v03r05 section 8.1 Limit: >500kHz Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Test CH 6dB Emission Bandwidth (MHz) Limit(kHz) Result Lowest 0.720 Middle 0.720 >500 Pass Highest 0.726 Test CH 99% Occupy Bandwidth (MHz) Limit(kHz) Result Lowest 1.056 Middle 1.050 N/A N/A Highest 1.050 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 36

CCIS Report No: CCISE170604402 Test plot as follows: 6dB EBW dare: 20.oum.zon7 ancsecce Lowest channel oare: a0.om.zonr enssrce Middle channel dare: 20.oum.zon7 ancsocee Highest channel Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1706044 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 36

Report No: CCISE170604402 99% OBW * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz 4.50 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.402252000 GHz Offset 6.5 dB OBW 1.056000000 MHz 10 Temp 1 [T1 OBW] 1 -8.60 dBm A 2.401478000 GHz 1 PK 0 Temp 2 [T1 OBW] MAXH -9.07 dBm LVL T1 T2 2.402534000 GHz -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.402 GHz 300 kHz/ Span 3 MHz Date: 28.JUN.2017 22:55:42 Lowest channel * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz 5.08 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.442246000 GHz Offset 6.5 dB OBW 1.050000000 MHz 10 Temp 1 [T1 OBW] 1 A -7.92 dBm 2.441478000 GHz 1 PK 0 Temp 2 [T1 OBW] MAXH T1 T2 -8.27 dBm LVL 2.442528000 GHz -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.442 GHz 300 kHz/ Span 3 MHz Date: 28.JUN.2017 22:54:57 Middle channel * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz 2.90 dBm Ref 16.5 dBm * Att 20 dB SWT 2.5 ms 2.479988000 GHz Offset 6.5 dB OBW 1.050000000 MHz 10 Temp 1 [T1 OBW] -10.01 dBm A 1 2.479478000 GHz 1 PK 0 Temp 2 [T1 OBW] MAXH -10.50 dBm LVL T1 T2 2.480528000 GHz -10 -20 -30 -40 3DB -50 -60 -70 -80 Center 2.48 GHz 300 kHz/ Span 3 MHz Date: 28.JUN.2017 22:54:15 Highest channel Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 36

Report No: CCISE170604402 6.5 Power Spectral Density Test Requirement: FCC Part15 C Section 15.247 (e) Test Method: ANSI C63.10:2013 and KDB558074v03r05 section 10.2 Limit: 8dBm Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Test CH Power Spectral Density (dBm) Limit(dBm) Result Lowest 4.52 Middle 5.08 8.00 Pass Highest 2.92 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 36

c c I s Report No: CCISE170604402 Test plots as follow: dare: 20 .a0n,z0n7 ascoocee Lowest channel dare: 20 .xm.zon7 ascoocos Middle channel ® se ces wee dare: 2o .am,zon7 anssocze Highest channel Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1706044 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 36

Report No: CCISE170604402 6.6 Band Edge 6.6.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2013 and KDB558074v03r05 section 13 Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 36

CCIS Report No: CCISE170604402 Test plots as follow: @_ «raw 100 knz marken i (ri o «vam 200 kn Roeness ree 16.5 gen «ate 20 ae sur 225 ne 2.220776000 onz suare 2.30 onz 102 miny stop 2.103 onz Date: 28.JUN.2017 23:02:40 Lowest channel @ «haw 100 knz marken i (ri o «vaw 200 kn ~46.54 aan ree 16.5 gen «ate 20 ae sur 225 ne 2.483720000 onz ~s suare 2.i7e ons 2.2 miz/ stop 2.5 ons Date: 28.JUN.2017 23:04:00 Highest channel Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1706044 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 36

Report No: CCISE170604402 6.6.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10: 2013and KDB 558074v03r05 section 12.1 TestFrequencyRange: 2.3GHz to 2.5GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 54.00 Average Value Above 1GHz 74.00 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 1.5 meters above the groundat a 3 meter camber. The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi- peak or average method as specified andthen reported in a data sheet. Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 36

Report No: CCISE170604402 Test channel: Lowest Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 36

Report No: CCISE170604402 Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 36

Report No: CCISE170604402 Test channel: Highest Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 36

Report No: CCISE170604402 Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 36

Report No: CCISE170604402 6.7 Spurious Emission 6.7.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2013 and KDB558074v03r05 section 11 Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 36

CCIS Report No: CCISE170604402 Test plot as follows: Lowest channel +maw 100 ko nackes i ori 1 »vew 200 knz —as.es on sass 2o as aur aus a 13 .7ea500000. on ~r0 ~so stace s0 inz 22407 ane, stop 2s ons Date: 28.0UN.2017 23:11:12 S0OMHz~25GHz Middle channel +maw 100 ko nackes i ori 1 »vew 200 knz cerl46 don ret i6.5 aen zo as aur cus » 1 .cese20000 ons E.197 aner stop 2s on Dake: 28.0UN.2017 23106154 S0OMHz~25GHz Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1706044 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 36

Report No: CCISE170604402 Highest channel @ «haw 100 knz marker i (zi a avam 300. knz —as.04. on ree i6.s can wars 20 as sur 2s » 13.713860000. ouz stare 30 onz 2.407 one, stop 2s onz Date: 28.JUN.2017 23:05:23 S0OMHz~25GHz Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1706044 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 29 of 36

Report No: CCISE170604402 6.7.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10:2013 TestFrequencyRange: 9KHz to 25GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark 30MHz-1GHz Quasi-peak 120KHz 300KHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 30MHz-88MHz 40.0 Quasi-peak Value 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8m(below 1GHz)/1.5m(above 1GHz) above the groundat a 3 meter camber. The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi- peak or average method as specified andthen reported in a data sheet. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 30 of 36

Report No: CCISE170604402 Test setup: Below 1GHz Above 1GHz Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Remark: 1. Pre-scan all kind of the place mode (X-axis, Y-axis, Z-axis), and found the Y-axis is the worst case. 2. 9 kHz to 30MHz is too low, so only shows the data of above 30MHz in this report. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 31 of 36

Report No: CCISE170604402 Below 1GHz: Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 32 of 36

Report No: CCISE170604402 Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 33 of 36

Report No: CCISE170604402 Above 1GHz Test channel: Lowest Level: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4804.00 50.16 35.99 6.80 41.81 51.14 74.00 -22.86 Vertical 4804.00 49.90 35.99 6.80 41.81 50.88 74.00 -23.12 Horizontal Test channel: Lowest Level: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4804.00 40.63 35.99 6.80 41.81 41.61 54.00 -12.39 Vertical 4804.00 39.19 35.99 6.80 41.81 40.17 54.00 -13.83 Horizontal Test channel: Middle Level: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4884.00 48.39 36.38 6.86 41.84 49.79 74.00 -24.21 Vertical 4884.00 48.05 36.38 6.86 41.84 49.45 74.00 -24.55 Horizontal Test channel: Middle Level: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4884.00 38.49 36.38 6.86 41.84 39.89 54.00 -14.11 Vertical 4884.00 38.06 36.38 6.86 41.84 39.46 54.00 -14.54 Horizontal Test channel: Highest Level: Peak Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4960.00 48.68 36.71 6.91 41.87 50.43 74.00 -23.57 Vertical 4960.00 48.10 36.71 6.91 41.87 49.85 74.00 -24.15 Horizontal Test channel: Highest Level: Average Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 4960.00 38.84 36.71 6.91 41.87 40.59 54.00 -13.41 Vertical 4960.00 38.26 36.71 6.91 41.87 40.01 54.00 -13.99 Horizontal Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1706044 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 34 of 36


Document Created: 2017-07-31 09:34:35
Document Modified: 2017-07-31 09:34:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC