RF Exposure Information

FCC ID: 2AE8ZAMGC

RF Exposure Info

Download: PDF
FCCID_4352118

Report No. 1930232R-RF-US-Exp RF Exposure Evaluation declaration Product Name ： Active Mobile Gateway-with Comm Trade Name ： Omnitracs Model No. ： CV90-JE103 FCC ID. ： 2AE8ZAMGC Applicant : Omnitracs, LLC Address : 9276 Scranton Road, Suite 200 San Diego California 92121 USA Date of Receipt : Mar. 15, 2019 Date of Declaration : May 10, 2019 Report No. : 1930232R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd.. Page: 1 of 19

Report No. 1930232R-RF-US-Exp 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. Page: 2 of 19

Report No. 1930232R-RF-US-Exp 1.3. Test Result of RF Exposure Evaluation Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 2.4G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.87 dBi or 1.94dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11b (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 242.661 0.0937 6 2437 154.882 0.0598 11 2462 159.588 0.0616 IEEE 802.11g (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 257.040 0.0992 6 2437 490.908 0.1895 11 2462 279.254 0.1078 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 3 of 19

Report No. 1930232R-RF-US-Exp Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 2.4G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.87 dBi or 1.94dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 311.172 0.1201 6 2437 484.172 0.1869 11 2462 309.742 0.1195 IEEE 802. 11n (40MHz) (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 3 2422 192.753 0.0744 6 2437 324.340 0.1252 9 2452 154.882 0.0598 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 4 of 19

Report No. 1930232R-RF-US-Exp Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 5G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3.81 dBi or 2.40 dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11a (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 36 5180 50.583 0.024 40 5220 51.404 0.025 44 5240 36.560 0.017 52 5260 52.723 0.025 60 5300 59.566 0.028 64 5320 32.434 0.015 100 5500 27.290 0.013 116 5580 77.983 0.037 140 5700 16.482 0.008 149 5745 58.479 0.028 157 5785 53.088 0.025 165 5825 54.702 0.026 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 5 of 19

Report No. 1930232R-RF-US-Exp Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 5G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3.81 dBi or 2.40 dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11ac (20MHz) (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 36 5180 50.234 0.024 40 5220 51.168 0.024 44 5240 37.411 0.018 52 5260 76.736 0.037 60 5300 61.518 0.029 64 5320 29.648 0.014 100 5500 23.014 0.011 116 5580 73.451 0.035 140 5700 21.528 0.010 149 5745 55.463 0.026 157 5785 53.827 0.026 165 5825 54.450 0.026 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 6 of 19

Report No. 1930232R-RF-US-Exp Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 5G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3.81 dBi or 2.40 dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11ac (40MHz) (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 38 5190 19.588 0.009 46 5230 35.727 0.017 54 5270 52.360 0.025 62 5310 16.107 0.008 102 5510 14.555 0.007 110 5550 74.302 0.035 134 5670 36.308 0.017 151 5755 62.374 0.030 159 5795 57.016 0.027 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 7 of 19

Report No. 1930232R-RF-US-Exp Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain 5G Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3.81 dBi or 2.40 dBi in linear scale. . Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11ac (80MHz) (ANT 0) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 42 5210 17.865 0.009 58 5290 14.555 0.007 106 5530 16.788 0.008 122 5610 66.989 0.032 155 5775 60.395 0.029 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 8 of 19

Report No. 1930232R-RF-US-Exp BT 2.0 Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.87 dBi or 1.94dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 2.495 0.0010 39 2441 2.786 0.0011 78 2480 2.871 0.0011 π/4 DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 1.941 0.0008 39 2441 2.377 0.0009 78 2480 2.427 0.0009 8DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 2.023 0.0008 39 2441 2.553 0.0010 78 2480 2.582 0.0010 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 9 of 19

Report No. 1930232R-RF-US-Exp BT 4.0 Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.87 dBi or 1.94dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 1.914 0.0007 19 2440 2.109 0.0008 39 2480 2.188 0.0008 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 10 of 19

Report No. 1930232R-RF-US-Exp WCDMA Band 2 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 1.92 dBi or 1.56 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1852.4 24.00 251.19 22.96 197.70 0.078 1.000 1880.0 24.00 251.19 22.95 197.24 0.078 1.000 1907.6 24.00 251.19 23.02 200.45 0.078 1.000 WCDMA Band 4 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 2.40 dBi or 1.74 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1712.4 24.00 251.19 22.45 175.79 0.087 1.000 1732.6 24.00 251.19 22.57 180.72 0.087 1.000 1752.6 24.00 251.19 23.01 199.99 0.087 1.000 Page: 11 of 19

Report No. 1930232R-RF-US-Exp WCDMA Band 5 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is -0.01 dBi or 1.00 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 826.4 24.00 251.19 22.86 193.20 0.050 0.551 836.6 24.00 251.19 22.86 193.20 0.050 0.558 846.6 24.00 251.19 22.98 198.61 0.050 0.564 CDMA/1xEVDO BC0 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is -0.01 dBi or 1.00 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 850.0 24.00 251.19 23.18 207.97 0.078 0.567 Page: 12 of 19

Report No. 1930232R-RF-US-Exp CDMA/1xEVDO BC1 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 1.92 dBi or 1.56 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1900.0 24.00 251.19 23.49 223.36 0.078 1.000 CDMA BC10 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 0.08 dBi or 1.02 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 750.0 24.00 251.19 22.85 192.75 0.051 0.500 Page: 13 of 19

Report No. 1930232R-RF-US-Exp LTE Band 2 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 1.92 dBi or 1.56 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1850.7 24.00 251.19 23.23 210.38 0.078 1.000 1880.0 24.00 251.19 23.28 212.81 0.078 1.000 1908.5 24.00 251.19 23.07 202.77 0.078 1.000 LTE Band 4 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 2.40 or 1.74 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1711.5 24.00 251.19 23.04 201.37 0.087 1.000 1732.5 24.00 251.19 23.02 200.45 0.087 1.000 1753.5 24.00 251.19 23.05 201.84 0.087 1.000 Page: 14 of 19

Report No. 1930232R-RF-US-Exp LTE Band 5 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is -0.01 or 1.00 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 829.0 24.00 251.19 22.91 195.43 0.050 0.553 836.5 24.00 251.19 22.89 194.54 0.050 0.558 847.5 24.00 251.19 22.91 195.43 0.050 0.565 LTE Band 12 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 0.08 or 1.02 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 701.5 24.00 251.19 23.16 207.01 0.051 0.468 707.5 24.00 251.19 23.24 210.86 0.051 0.472 715.3 24.00 251.19 23.10 204.17 0.051 0.477 Page: 15 of 19

Report No. 1930232R-RF-US-Exp LTE Band 17 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 0.08 or 1.02 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 706.5 24.00 251.19 23.30 213.80 0.051 0.471 710.0 24.00 251.19 23.14 206.06 0.051 0.473 711.0 24.00 251.19 23.09 203.70 0.051 0.474 LTE Band 25 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is 1.92 or 1.56 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 1851.5 24.00 251.19 23.25 211.35 0.078 1.000 1882.5 24.00 251.19 23.38 217.77 0.078 1.000 1912.5 24.00 251.19 23.17 207.49 0.078 1.000 Page: 16 of 19

Report No. 1930232R-RF-US-Exp LTE Band 26 Antenna Gain Based on the Maximum Conducted Output Power, the usable maximum antenna gain is -0.01 or 1.00 linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: Channel Maximum Output Power by Conducted Output Maximum Power Density Limit Frequency manufacturer’s declaration Power by Testing at R = 20 cm (mW/cm2) (MHz) (dBm) (mW) (dBm) (mW) (mW/cm2) 815.5 24.00 251.19 22.95 197.24 0.050 0.544 831.5 24.00 251.19 23.00 199.53 0.050 0.554 846.5 24.00 251.19 22.95 197.24 0.050 0.564 Page: 17 of 19

Report No. 1930232R-RF-US-Exp Collocation Power Density Product Active Mobile Gateway-with Comm Test Mode Transmit Mode Test Condition RF Exposure Evaluation Power Density Power Density Collocation Limit for WiFi 2.4GHz for 3G Power Density 2 2 2 (mW/cm2) (mW/cm ) (mW/cm ) (mW/cm ) 0.1895 0.102 0.2915 1.0000 Power Density Power Density Collocation Limit for WiFi 5GHz for 3G Power Density 2 2 2 (mW/cm2) (mW/cm ) (mW/cm ) (mW/cm ) 0.0370 0.102 0.1390 1.0000 Power Density Power Density Collocation Limit for BT 2.0 for 3G Power Density 2 2 2 (mW/cm2) (mW/cm ) (mW/cm ) (mW/cm ) 0.0011 0.102 0.1031 1.0000 Power Density Power Density Collocation Limit for BT 4.0 for 3G Power Density (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) 0.0008 0.102 0.1028 1.0000 Power Density Power Density Collocation Limit for WiFi 2.4GHz for LTE Power Density (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) 0.1895 0.109 0.2985 1.0000 Power Density Power Density Collocation Limit for WiFi 5GHz for LTE Power Density (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) 0.0370 0.109 0.1460 1.0000 Page: 18 of 19

Report No. 1930232R-RF-US-Exp Power Density Power Density Collocation Limit for BT 2.0 for LTE Power Density 2 2 2 (mW/cm2) (mW/cm ) (mW/cm ) (mW/cm ) 0.0011 0.109 0.1101 1.0000 Power Density Power Density Collocation Limit for BT 4.0 for LTE Power Density (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) 0.0008 0.109 0.1098 1.0000 Page: 19 of 19


Document Created: 2019-07-02 14:39:31
Document Modified: 2019-07-02 14:39:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC