14_UHF-02 TestRpt.pdf

FCC ID: 2AE6GUHF-02

Test Report

Download: PDF
FCCID_3051403

Page 1 of 24 FCC Te est Rep R portt Rep port No.: AGC0358 88160602 2FE01 FCC ID D : 2AE6 6GUHF‐02 APPLICATION PU URPOSE : Origiinal Equipm ment PRODU UCT DESIG GNATION : Wireeless Receiv ver BRAND D NAME : Gemiini MODE EL NAME : UHF‐‐02 CLIENT : INNO OVATIVE CO ONCEPTS AND A DESIG GN LLC DATE OF O ISSUE : Jun.2 23, 2016 STAND DARD(S) : FCC Part P 15 Rulles : REPOR RT VERSIO ON V1.0 A Attestat tion of Global G C Complia ance (Sh henzhen n) Co., Ltd L CAUTIO ON: This rep port shall not n be repro oduced except in full without w thee written permission of the test laborato ory and shaall not be quoted out of o context.

Report No.: AGC03588160602FE01 Page 2 of 24 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun.23, 2016 Valid Original Report

Report No.: AGC03588160602FE01 Page 3 of 24 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ............................................................................................................... 4 2. GENERAL INFORMATION ............................................................................................................................ 5 2.1. PRODUCT DESCRIPTION ..................................................................................................................... 5 2.2. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................. 5 2.3. TEST METHODOLOGY .......................................................................................................................... 5 2.4. SPECIAL ACCESSORIES ....................................................................................................................... 5 2.5. EQUIPMENT MODIFICATIONS .............................................................................................................. 5 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 6 4. DESCRIPTION OF TEST MODES................................................................................................................. 6 5. SYSTEM TEST CONFIGURATION ............................................................................................................... 6 5.1. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 6 5.2. SUMMARY OF TEST RESULTS.............................................................................................................. 6 6. TEST FACILITY ............................................................................................................................................. 7 7. RADIATED EMISSION................................................................................................................................... 8 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 8 7.2. TEST SETUP......................................................................................................................................... 10 7.3. TEST RESULT ........................................................................................................................................11 8. FCC LINE CONDUCTED EMISSION TEST ................................................................................................ 13 8.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................................ 13 8.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .............................................................. 13 8.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................ 14 8.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................................... 14 8.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST .................................................................... 15 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ........................................................................................ 17 APPENDIX B: PHOTOGRAPHS OF EUT ....................................................................................................... 19

Report N No.: AGC035 588160602F FE01 Page 4 of o 24 1. VERIFIC CATION OF F CONFOR RMITY A Applicant INNOV VATIVE CON NCEPTS AN ND DESIGN LLC A Address 107 Tru umbull Stree et - Bldg F8,, 2nd Flr, Elizabeth, NJ 07206 USA M Manufacture er PROAU UDIO ELEC CTRONICS CO., C LIMITE ED FLAT 03H 0 15/F CA ARNIVAL CO OMMERCIA AL BUILDING G 18 JAVA ROAD R A Address NORTHH POINT HKK P Product Des signation Wirelesss Receiverr B Brand Name e Gemini T Test Model UHF-02 D Date of test Jun.10 0,2016 to Jun n.13,2016 D Deviation None C Condition off Test Samp ple Norma al T Test Result Pass R Report Temp plate AGCRT T-US-BR/RF F (2013-03-0 01) We hereby ce W ertify that: T above eq The quipment wa as tested byy Dongguan Precise Tes sting Service e Co., Ltd. The test data a, data evalu uation, te est procedurres, and equ uipment configurations shown s in this report werre made in aaccordance with the procedures given g in ANSSI C63.4 (20 014) and the energy emiitted by the sample s EUT T tested as described d in this eport is in co re ompliance withw radiated emission limmits of FCC C Rules Part . Tested byy Ste even Zhou(Zhou Pengyun) 3, 2016 Jun.23 Reviewed by b Rocck Huang(Huang Dinglue) 3, 2016 Jun.23 Approved by b Solger Zhang(Z Zhang Hongyyi) 3, 2016 Jun.23 Authorized Officer

Report No.: AGC03588160602FE01 Page 5 of 24 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency 517.6MHz + 521.5MHz or 533.7MHz + 537.2MHz Field Strength(3m) 26.29dBuV/m(PK)@3m Modulation FM Hardware Version UHF-02 REV A(UHF-02-RX) Software Version UHF-02 Antenna Designation Two same Fixed antenna(length 10cm) Antenna Gain 0dBi EUT Supply DC 12V by adapter INPUT :AC 100-240V 50/60Hz 0.5A max Adapter Supply OUTPUT: DC 12V 0.2A 2.2. RELATED SUBMITTAL(S) / GRANT (S) This submittal(s) (test report) is intended for FCC ID: 2AE6GUHF-02 filing to comply with Section 15.107&109 of the FCC Part 15, Subpart B Rules. 2.3. TEST METHODOLOGY Both conducted and radiated testing was performed according to the procedures in ANSI C63.4 (2014). Radiated testing was performed at an antenna to EUT distance 3 meters. 2.4. SPECIAL ACCESSORIES Refer to section 5.1. 2.5. EQUIPMENT MODIFICATIONS Not available for this EUT intended for grant.

Report No.: AGC03588160602FE01 Page 6 of 24 3. MEASUREMENT UNCERTAINTY Conducted measurement: ±3.18dB Radiated measurement: ±3.91dB 4. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Receiver mode Note: All length of antenna have been pre-tested, maximum length of antenna is the worst case and the data is recorded in the test report. 5. SYSTEM TEST CONFIGURATION 5.1. EQUIPMENT USED IN EUT SYSTEM Item Equipment Model No. ID or Specification Remark 1 Wireless Receiver UHF-02 FCC ID:2AE6GUHF-02 N/A 2 Adapter CGSW-1200200 DC12V/200mA Support 5.2. SUMMARY OF TEST RESULTS FCC RULES DESCRIPTION OF TEST RESULT §15.109 Radiated Emission Compliant §15.107 Conducted Emission Compliant

Report No.: AGC03588160602FE01 Page 7 of 24 6. TEST FACILITY Site Dongguan Precise Testing Service Co., Ltd. Building D,Baoding Technology Park,Guangming Road2,Dongcheng District, Location Dongguan, Guangdong, China, FCC Registration 371540 No. The test site is constructed and calibrated to meet the FCC requirements in documents Description ANSI C63.4:2014. ALL TEST EQUIPMENT LIST FOR RADIATED EMISSION TEST (BELOW 1GHZ) Radiated Emission Test Site Model Serial Last Due Name of Equipment Manufacturer Number Number Calibration Calibration Rohde & EMI Test Receiver ESCI 101417 July 4, 2015 July 3, 2016 Schwarz Trilog Broadband Antenna SCHWARZBECK VULB9160 9160-3355 July 4, 2015 July 3, 2016 (25M-1GHz) Signal Amplifier SCHWARZBECK BBV 9475 9745-0013 July 4, 2015 July 3, 2016 RF Cable SCHWARZBECK AK9515E 96221 July 4, 2015 July 3, 2016 3m Anechoic Chamber CHENGYU 966 PTS-001 June 3, 2016 June 2, 2017 MULTI-DEVICE Positioning Max-Full MF-7802 MF780208339 N/A N/A Controller Active loop antenna Schwarzbeck FMZB1519 1519-038 June 3, 2016 June 2, 2017 (9K-30MHz) Spectrum analyzer Agilent E4407B MY46185649 June 3, 2016 June 2, 2017 FOR RADIATED EMISSION TEST (1GHZ ABOVE) Radiated Emission Test Site Model Serial Last Due Name of Equipment Manufacturer Number Number Calibration Calibration Rohde & EMI Test Receiver ESCI 101417 July 4, 2015 July 3, 2016 Schwarz Horn Antenna (1G-18GHz) SCHWARZBECK BBHA9120D 9120D-1246 June 3, 2016 June 2, 2017 Spectrum Analyzer Agilent E4411B MY4511453 July 4, 2015 July 3, 2016 Signal Amplifier SCHWARZBECK BBV 9718 9718-269 July 4, 2015 July 3, 2016 RF Cable SCHWARZBECK AK9515H 96220 July 4, 2015 July 3, 2016 3m Anechoic Chamber CHENGYU 966 PTS-001 June 3, 2016 June 2, 2017 MULTI-DEVICE Positioning Max-Full MF-7802 MF780208339 N/A N/A Controller Horn Ant (18G-40GHz) Schwarzbeck BBHA 9170 9170-181 June 3, 2016 June 2, 2017

Report No.: AGC03588160602FE01 Page 8 of 24 7. RADIATED EMISSION 7.1. MEASUREMENT PROCEDURE 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions below 1GHz, use 120KHz RBW and VBW>=3RBW for QP reading. 7. For emissions above 1GHz, use 1MHz VBW and RBW for peak reading. Then 1MHz RBW and 10Hz VBW for average reading in spectrum analyzer. 8. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum values. 9.If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 10. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 11. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High - Low scan is not required in this case. 12. Only the worst case is reported.

Report No.: AGC03588160602FE01 Page 9 of 24 The following table is the setting of spectrum analyzer and receiver. Spectrum Parameter Setting Start ~Stop Frequency 9KHz~150KHz/RBW 200Hz for QP Start ~Stop Frequency 150KHz~30MHz/RBW 9KHz for QP Start ~Stop Frequency 30MHz~1000MHz/RBW 120KHz for QP 1GHz~26.5GHz Start ~Stop Frequency 1MHz/1MHz for Peak, 1MHz/10Hz for Average Receiver Parameter Setting Start ~Stop Frequency 9KHz~150KHz/RBW 200Hz for QP Start ~Stop Frequency 150KHz~30MHz/RBW 9KHz for QP Start ~Stop Frequency 30MHz~1000MHz/RBW 120KHz for QP

Report No.: AGC03588160602FE01 Page 10 of 24 7.2. TEST SETUP Radiated Emission Test-Setup Frequency Below 30MHz RADIATED EMISSION TEST SETUP 30MHz-1000MHz RADIATED EMISSION TEST SETUP ABOVE 1000MHz

Report No.: AGC03588160602FE01 Page 11 of 24 7.3. TEST RESULT Test Mode: Receiver Mode RADIATED EMISSION BELOW 30MHz No emission found between lowest internal used/generated frequencies to 30MHz. RADIATED EMISSION BELOW 1GHZ-Horizontal RESULT: PASS

Report No.: AGC03588160602FE01 Page 12 of 24 RADIATED EMISSION BELOW 1GHZ-Vertical RESULT: PASS Note: 1. Factor=Antenna Factor + Cable loss - Amplifier gain, Margin=Measurement-Limit. 2. The “Factor” value can be calculated automatically by software of measurement system. 3. Emissions range from 1GHz to 3GHz have 20dB margin. No recording in the test report. 4. Only the data of the worst case would be record in this test report.

Report No.: AGC03588160602FE01 Page 13 of 24 8. FCC LINE CONDUCTED EMISSION TEST 8.1. LIMITS OF LINE CONDUCTED EMISSION TEST Maximum RF Line Voltage Frequency Q.P.( dBuV) Average( dBuV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 8.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST EUT & Support

Report No.: AGC03588160602FE01 Page 14 of 24 8.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.4. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. 4. All support equipments received AC120V/60Hz power from a LISN, if any. 5. The EUT received 120V/60Hz power by a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 8.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page.

Report No.: AGC03588160602FE01 Page 15 of 24 8.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST Line Conducted Emission Test Line 1-L RESULT: PASS

Report No.: AGC03588160602FE01 Page 16 of 24 Line Conducted Emission Test Line 2-N RESULT: PASS

Report No.: AGC03588160602FE01 Page 17 of 24 APPENDIX A: PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP

Report No.: AGC03588160602FE01 Page 18 of 24 LINE CONDUCTED EMISSION TEST SETUP

Report No.: AGC03588160602FE01 Page 19 of 24 APPENDIX B: PHOTOGRAPHS OF EUT TOTAL VIEW OF EUT TOP VIEW OF EUT

Report No.: AGC03588160602FE01 Page 20 of 24 BOTTOM VIEW OF EUT FRONT VIEW OF EUT

Report No.: AGC03588160602FE01 Page 21 of 24 BACK VIEW OF EUT LEFT VIEW OF EUT

Report No.: AGC03588160602FE01 Page 22 of 24 RIGHT VIEW OF EUT OPEN VIEW OF EUT

Report No.: AGC03588160602FE01 Page 23 of 24 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2

Report No.: AGC03588160602FE01 Page 24 of 24 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4 ----END OF REPORT----


Document Created: 2016-07-01 18:25:43
Document Modified: 2016-07-01 18:25:43
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC