User Manual

FCC ID: 2AE6GALP-1500

Users Manual

Download: PDF
FCCID_4365803

ALT-T1500-PK THUNDER USER MANUAL Introduction Thank you for purchasing our ALT-T1500-PK Thunder. We are confident that the Altec Lansing family of products will make your life easier by using the latest technological advancements in sound repro- duction and will raise the bar for pro audio products. Support At Altec Lansing, our highest priority is making your experience unforgettable. Need help with setting up, troubleshooting, or looking for some tips? We’re here for you, Monday through Friday 9AM to 5PM EST. 1-888-703-2307 alteclansing.com

2 LIGHTNING ALP-L2200PKTHUNDER ALT-T1500-PK Index What’s Included 2 Power On 3 EQ 3 Lighting 3 Playback from USB and SD 3 Bluetooth Pairing 4 Bluetooth Linking 4 FM Radio 4 Connect an External Device 5 Stand Mounting 5 ALT-T1500-PK Thunder Features 6 FCC Compliance Statement 6 Caution 7 Precautions 7 Warranty and Repair 8 Limited Warranty 8 Return/Repair 8 What’s Included Please ensure that you find these accessories included with your ALT-T1500-PK Thunder speaker: (1) ALT-T1500-PK Thunder (1) Speaker Stand (1) Wired Microphone (1) Power Cord

ALP-L2200PK LIGHTNING ALT-T1500-PK THUNDER 3 Power On Bluetooth Pairing • Connect power from adaptor to wall and • Press the BLUETOOTH button. The connection on back of speaker speaker is now in Bluetooth pairing mode. · Conecte la alimentación del adaptador a la • Presione el botón BLUETOOTH. El altavoz pared y la conexión en la parte posterior del está ahora en modo de emparejamiento altavoz Bluetooth. • Press the power button on the front of • Search for ALTEC THUNDER 15 on the speaker. You will hear “Powering On, your phone under Bluetooth settings and Welcome to Altec Lansing” to indicate the connect to the speaker speaker is now on. • Busque ALTEC THUNDER 15 en su teléfono · Presione el botón de encendido en la parte en la configuración de Bluetooth y conéctese al frontal del altavoz. Escuchará “Encendido, altavo Bienvenido a Altec Lansing” para indicar que el altavoz ahora está encendido. • The speaker will play two tones to • While speaker is connected to power, indicated that it is now paired with your it will charge. There is a battery icon phone indicating fullness of internal battery. • El altavoz reproducirá dos tonos para indicar When it is full charged you can disconnect que ahora está sincronizado con su teléfono from direct power. · Mientras el altavoz está conectado a la alimentación, se cargará. Hay un pequeño icono de batería que indica que la batería está llena. Cuando está completamente cargada, puede desconectarse de la alimentación directa.

4 ALT-T1500-PK LIGHTNING ALP-L2200PKTHUNDER Connecting & Playing Adjusting Volume • To connect other input sources – • The MASTER VOLUME controls are i. Open front flap to display USB, Aux and located on the front panel of the speaker. Mic inputs on the front of the speaker Press the VOLUME UP button 1 time to ii. Connect USB cable to USB Input turn the volume up. Press the VOLUME iii. Connect Aux cable to Aux input DOWN button 1 time to turn the volume • Para conectar otras fuentes de entrada - down. VL will appear on screen & you can yo. Abra la tapa frontal para mostrar las entradas adjust the levels from 1 to 32 USB, Aux y Mic en la parte frontal del altavoz • Los controles MASTER VOLUME están ii. Conecte el cable USB a la entrada USB ubicados en el panel frontal del altavoz. iii. Conecte el cable auxiliar a la entrada auxiliar Presione el botón VOLUME UP 1 vez para subir el volumen. Presione el botón de BAJAR VOLUMEN 1 vez para bajar el volumen. VL aparecerá en la pantalla y puede ajustar los niveles de 1 a 32 • With the speaker turned on, press the SOURCE button. i. Press 1 time for LINE IN MODE ii. Press 2 times for FM mode iii. Press 3 times for USB mode iv. Press 4 times for Bluetooth mode • Con el altavoz encendido, presione el botón FUENTE. yo. Presione 1 vez para LINE IN MODE ii. Presione 2 veces para el modo FM iii. Presione 3 veces para el modo USB iv. Presiona 4 veces para el modo Bluetooth

ALT-T1500-PK THUNDER ALP-L2200PK LIGHTNING 5 Beast Mode Controlling Playback • Enable Beast mode by pressing the • Locate the PLAY/PAUSE, SKIP AHEAD BEAST button on the front panel of the and SKIP BACKWARD controls on the speaker. The word BEAST will pop up front of the speaker panel. Press the PLAY/ on the LCD Screen. To turn it off, simply PAUSE button one time to PLAY from press the button again 1 time BLUETOOTH, LINE IN or USB sources. • Active el modo Bestia presionando el botón • Localice los controles de REPRODUCIR / BEAST en el panel frontal del altavoz. La PAUSAR, SALTAR AL AVANCE y SALTAR palabra BESTIA aparecerá en la pantalla LCD. ATRÁS en la parte frontal del panel de Para apagarlo, simplemente presione el botón altavoces. Presione el botón REPRODUCIR / otra vez 1 vez PAUSAR una vez para REPRODUCIR desde BLUETOOTH, LINE IN o fuentes USB . • To repeat a track locate the REPEAT 1 button. Press that button 1 time will enable the current track to be repeated. • Para repetir una pista localice el botón REPETIR 1. Presione ese botón 1 vez para que la pista actual se repita. • Press the SKIP AHEAD button to advance to the next track. Press the SKIP BACKWARD button to return to the previous track. • Presione el botón SKIP AHEAD para avanzar a la siguiente pista. Presione el botón SKIP BACKWARD para volver a la pista anterior. • To change radio stations in FM MODE. Press the SKIP AHEAD button to increase stations forward. Press the SKIP BACKWARD button to decrease stations backward • Para cambiar emisoras de radio en MODO FM. Presione el botón SKIP AHEAD para aumentar las estaciones hacia adelante. Presione el botón SKIP BACKWARD para disminuir las estaciones hacia atrás

6 ALT-T1500-PK LIGHTNING ALP-L2200PKTHUNDER Equalizer EQ Bluetooth Linking • The Thunder has 5 different EQ settings, • To LINK your speaker to another ALTEC NORM, CLUB, VOCL, ROCK, POP. THUNDER, start by pressing the LINK Located the EQ button. Pressing it 1 time button. You will hear a set of tones to will change the EQ settings. The display indicate that the speaker is now in linking will indicate what setting you are currently mode. The word LINK should appear in using. the lower left-hand corner of the LCD • El Thunder tiene 5 configuraciones de screen. Press the LINK button on the other ecualización diferentes, NORM, CLUB, VOCL, speaker and you will hear the same tones. ROCK, POP. Ubicado el botón EQ. Si lo pulsa The speakers are now linked. 1 vez, cambiará la configuración del ecualizador. • Para ENLACE su altavoz a otro ALTEC La pantalla indicará qué configuración está THUNDER, comience presionando el botón utilizando actualmente. ENLACE. Escuchará un conjunto de tonos para indicar que el altavoz está ahora en modo de enlace. La palabra ENLACE debe aparecer en la esquina inferior izquierda de la pantalla LCD. Presione el botón ENLACE en el otro altavoz y escuchará los mismos tonos. Los altavoces están ahora vinculados.

ALT-T1500-PK THUNDER ALP-L2200PK LIGHTNING 7 Controlling the Lights Connecting & Controlling the Mic • The THUNDER speaker has 3 light • To connect a microphone to your settings; STEADY FLASHING, FLASHING THUNDER speaker. Locate the front TO THE MUSIC, FADE IN/OUT. To input connection panel on the front of activate STEADY FLASHING, Locate the the speaker. Open the rubber panel door. LIGHTS button on the front of the LCD Connect microphone cable to input labeled display. Press 1 time to turn lights on MIC. and activate steady flashing mode. Press • Para conectar un micrófono a su altavoz 2 times to turn on flashing to the music THUNDER. Localice el panel de conexión de mode. Press 3 times to activate fade in/out entrada frontal en la parte frontal del altavoz. mode. Press 4 times to turn off lights. Abra la puerta del panel de goma. Conecte el • El altavoz THUNDER tiene 3 configuraciones cable del micrófono a la entrada etiquetada MIC. de luz; FLASHING DE SEGURIDAD, INTERMITENTE A LA MÚSICA, FADE IN / OUT. Para activar STEADY FLASHING, ubique el botón LIGHTS en la parte frontal de la pantalla LCD. Presione 1 vez para encender las luces y activar el modo de destello continuo. Presione 2 veces para encender el modo de música intermitente. Presione 3 veces para activar el modo de entrada / salida de fundido. Presione 4 veces para apagar las luces. • To control the microphone volume, locate the MIC - and VOL+ buttons on the front panel of the speaker. Press the VOL + button 1 time to increase the microphone volume. Press the MIC – button 1 time to decrease the microphone volume. • Para controlar el volumen del micrófono, ubique los botones MIC y VOL + en el panel frontal del altavoz. Presione el botón VOL + 1 vez para aumentar el volumen del micrófono. • The THUNDER speaker has 12 different Presione el botón MIC - una vez para disminuir light colors. To change colors, Locate the el volumen del micrófono. COLOR button. Each time you press the button it will change the color of the lights in the speaker • El altavoz THUNDER tiene 12 colores de luz diferentes. Para cambiar los colores, busque el botón COLOR. Cada vez que presione el botón cambiará el color de las luces en el altavoz

8 ALT-T1500-PK LIGHTNING ALP-L2200PK THUNDER ALT-T1500-PK THUNDER Features 1 2 1. Power ON/OFF Switch: Turns the unit on and off 3 2. Volume Up: Turns the main volume up 4 3. Volume Down: Turns the volume down 5 20 4. Beast: Turns on and off Beast Mode 7 6 9 8 5. Skip Ahead: Moves track ahead on Bluetooth/USB mode and moves the radio station forward on FM mode 11 10 12 13 21 6. Play/Pause: Starts and Stops music Bluetooth/ 14 15 USB mode 16 7. Skip Backwards: Moves 1 track backwards on 17 18 Bluetooth/USB mode and moves the radio station backwards on FM mode 19 8. EQ: Switches between equalizer settings 9. Source: Switches between input sources 10. Track Repeat: Repeats the current track in Blue- Responsible Party Name: tooth/USB modes. Innovative Concepts & Designs Company address: 11. Link: Initiates Bluetooth Linking 458 Florida Grove Road, Perth Amboy, NJ 08861 USA 12. Bluetooth: Activates Bluetooth Pairing 13. Lights: Turns on/off and activates different light FCC Compliance Statement modes This device complies with Part 15 of the FCC Rules. 14. Color: Changes the colors of lights on speaker The operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 15. Mic Vol Up: Increases the Microphone volume (2( This device must accept any interference received, including interference that may cause undesired operation. 16. Mic Vol Down: Decreases the Microphone volume Note: This equipment has been tested and found to comply with the limits for a class B digital device, 17. Aux Input: Attach aux input here pursuant to Part 15 of the FCC Rules. These equipment generates uses and can radiate radio frequency energy 18. Microphone Input: Attach microphone input here and if not installed and used in accordance with the instructions, may cause harmful interference to radio 19. USB Input: Plug in USB input here communications. However, there is no guarantee that interference will not occur in a particular installation. 20. Link Out: To connect output to another source If this equipment does cause interference to radio or television reception, which can be determined by turning 21. DC IN: Plug in power source. the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. • Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2AE6GALP-1500

ALT-T1500-PK THUNDER ALP-L2200PK LIGHTNING 9 the stands or adjusting their height. Caution – Add weight such as sand bags around the stand legs to prevent them from falling over. • All operating instructions should be read before using – Use the stand, maximum height of 140cm (55”). this equipment. – If you use the socket of a subwoofer to allow • To reduce the risk of electrical shock, do not open the mounting of a satellite speaker, use a pole 100cm max. unit. There are no user replaceable parts inside. with an outer diameter of 35mm (1-3/8”). Please refer servicing to a qualified Altec Lansing service – When carrying the device, always use two or more technician. Do not attempt to return this equipment to people. your dealer. – Before moving the unit, remove all plugged cables. • Do not expose this unit to direct sunlight or to a heat – Do not use the speaker’s handles for suspended source such as a radiator or stove. installation. Doing so can result in damage or injury. • This unit should be cleaned only with a damp cloth. – Do not expose the device to excessive dust or Avoid solvents or other cleaning detergents. vibrations, or extreme cold or heat (such as in direct • When moving this equipment, it should be placed in its sunlight, near a heater) to prevent the possibility of panel original carton and packaging. This will reduce the risk disfiguration or damage to the internal components. of damage during transit. – Do not place the device in an unstable position where • Do not expose this unit to water or heat. it may accidentally fall over. • Do not use cleaning products or lubricants on • Rigging Safety: The Altec Lansing Rigging System’s the controls or switches. provisions for use require that it be installed in accor- dance with the following specifications. Before you begin installation: Precautions – Ensure that points where you have chosen to mount (for example a chain hoist) on the stage roof or Please read carefully before proceeding: venues ceiling comply with accident Always follow the basic precautions listed below to avoid prevention and that the safety the possibility of serious injury or even death from electrical standards authority has certified shock, short-circuiting, damages, fire, or other hazards. them for the full load. • Please read, follow, and keep all instructions before using – Inspect all components to this product. ensure they are in good working • Cleaning: The product should be cleaned only with a order, taking care that all polishing cloth or a soft dry cloth. tracks, trusses and connecting Never clean with furniture wax, benzene, or other components (cables, fittings) are volatile liquids since they may corrode the cabinet. undamaged. • Water and Moisture: Do not use this product near – Use only the parts specified in this water, for example, near a bathtub, wash bowl, kitchen operating manual! Be sure to protect sink, or laundry tub; in a wet basement; or near a swim- cabinets against rain and moisture ming pool; and the like. when they are deployed outdoors. • Do Not Open: Do not open the device or attempt to – If parts of the load- disassemble the internal parts or modify them in any bearing equipment have way. The device contains no user- serviceable parts. If been deformed, it is up it should appear to be malfunctioning, discontinue use to the manufacturer to immediately and have it inspected by qualified Altec determine if they are Lansing service personnel. repairable. • Replacement Parts: When replacement parts are The principle requirement for safe required, be sure the service technician has used replace- handling and trouble-free operation of this rigging ment parts specified by the manufacturer or have the system is a thorough understanding of fundamental same characteristics as the original part. Unauthorized operating safety and safety regulations. This operating substitutions may result in fire, electric shock, or other manual contains the most vital instructions concerning hazards. the safe operation of the enclosures. • Location: If you use a stand, check the stand’s • Connections: Before connecting the device to other specifications and make sure that it is sturdy enough to devices, turn off the power for all devices. Before turning support the weight of the speaker. You may need to limit the power on or off for all devices, set all volume levels the number of people around the placed stand, to avoid to minimum. toppling the device or causing damage to the internal components. Also, be sure to keep the following cautions. – Use the speaker stands with their legs fully opened. – Mount only one speaker on each speaker stand. – Tighten fastening screws securely. – Remove the speakers from the stands before moving

10 ALT-T1500-PK LIGHTNING ALP-L2200PKTHUNDER Warranty and Repair All Altec Lansing products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service. Limited Warranty A. Altec Lansing guarantees its products to be free from defects in materials and workmanship for one (1) year from the original purchase date. B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by Altec Lansing. C. There are no obligations of liability on the part of Altec Lansing for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. All implied warranties for Altec Lansing, including implied warranties for fitness, are limited in duration to one (1) year from the original date of purchase, unless otherwise mandated by local statutes. Return/Repair A. In the U.S.A., please call our helpful Customer Service Representatives at (888) 703-2307, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you. B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a description of the defect. Send by insured freight to: Altec Lansing and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely! C. Service covered under warranty will be paid for by Altec Lansing and returned to you. For non-war- rantied products, Altec Lansing will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges. D. On warranty service, you pay for shipping to Altec Lansing, we pay for return shipping within the continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight. E. Please allow 2-3 weeks for return of your product. Under normal circumstances your product will spend no more than 10 working days at Altec Lansing. We are not responsible for shipping times. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Altec Lansing shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Altec Lansing. It is recommended that all maintenance and service on this product is performed by Altec Lansing or its authorized agents. Altec Lansing will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.

Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.


Document Created: 2019-07-10 14:17:21
Document Modified: 2019-07-10 14:17:21
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC