Test Report

FCC ID: 2AE2V10SDS1100

Test Report

Download: PDF
FCCID_3903708

TEST REPORT FCC ID: 2AE2V10SDS1100 Product: wireless smoke detector Model No.: WSDxxx Additional Model No.: N/A Trade Mark: N/A Report No.: TCT180514E027 Issued Date: May 29, 2018 Issued for: SensingTek Co., Ltd. 4F-2, No.8, Ziqiang S. Rd., Zhubei City, Hsinchu County 302, Zhubei, Taiwan Issued By: Shenzhen Tongce Testing Lab. 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 TABLE OF CONTENTS 1. Test Certification ..................................................................................... 3 2. Test Result Summary .............................................................................. 4 3. EUT Description ....................................................................................... 5 4. Genera Information.................................................................................. 6 4.1. Test Environment and Mode................................................................................. 6 4.2. Description of Support Units ................................................................................ 6 5. Facilities and Accreditations .................................................................. 7 5.1. Facilities ................................................................................................................. 7 5.2. Location ................................................................................................................. 7 5.3. Measurement Uncertainty ..................................................................................... 7 6. Test Results and Measurement Data ..................................................... 8 6.1. Antenna Requirement ........................................................................................... 8 6.2. Conducted Emission ............................................................................................. 9 6.3. Radiated Emission Measurement ...................................................................... 10 6.4. 20dB Occupied Bandwidth ................................................................................. 18 Appendix A: Photographs of Test Setup Appendix B: Photographs of EUT Page 2 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 1. Test Certification Product: wireless smoke detector Model No.: WSDxxx Additional N/A Model No.: Trade Mark: N/A Applicant: SensingTek Co., Ltd. 4F-2, No.8, Ziqiang S. Rd., Zhubei City, Hsinchu County 302, Zhubei, Address: Taiwan Manufacturer: SensingTek Co., Ltd. 4F-2, No.8, Ziqiang S. Rd., Zhubei City, Hsinchu County 302, Zhubei, Address: Taiwan Date of Test: May 15, 2018 – May 28, 2018 Applicable FCC CFR Title 47 Part 15 Subpart C Section 15.249 Standards: The above equipment has been tested by Shenzhen Tongce Testing Lab. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date: May 28, 2018 Tested By: Jin Wang Reviewed By: Date: May 29, 2018 Beryl Zhao Approved By: Date: May 29, 2018 Tomsin Page 3 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203 PASS AC Power Line Conducted §15.207 N/A Emission Field Strength of §15.249 (a) PASS Fundamental §2.1053 Spurious Emissions PASS §15.249 (a) (d)/ §15.209 §2.1053 Band Edge PASS §15.249 (d)/ §15.205 §2.1049 20dB Occupied Bandwidth PASS §15.215 (c) Note: 1. Pass: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Page 4 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 3. EUT Description Product: wireless smoke detector Model No.: WSDxxx Additional Model No.: N/A Trade Mark: N/A Hardware Version: TR_SMOKE_Rev1.1 Software Version: TR_SMOKE_Rev1.0 Operation Frequency: 902.14MHz Number of Channel: 1 Modulation FSK Technology: Antenna Type: Internal Antenna Antenna Gain: 2.2dBi Power Supply: DC 3V Operation Frequency of Channel Frequency 902.14MHz Page 5 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 4. Genera Information 4.1. Test Environment and Mode Operating Environment: Temperature: 25.0 C Humidity: 54 % RH Atmospheric Pressure: 1010 mbar Test Mode: Keep the EUT in continuous transmitting by select Engineering mode: channel The sample was placed (0.8m below 1GHz, 1.5m above 1GHz) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 4.2. Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Equipment Model No. Serial No. FCC ID Trade Name / / / / / Note: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 6 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 5. Facilities and Accreditations 5.1. Facilities The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 645098 Shenzhen Tongce Testing Lab The 3m Semi-anechoic chamber has been registered and fully described in a report with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. ● IC - Registration No.: 10668A-1 The 3m Semi-anechoic chamber of Shenzhen TCT Testing Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing 5.2. Location Shenzhen Tongce Testing Lab Address: 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China TEL: +86-755-27673339 5.3. Measurement Uncertainty The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item MU 1 Conducted Emission ±2.56dB 2 RF power, conducted ±0.12dB 3 Spurious emissions, conducted ±0.11dB 4 All emissions, radiated(<1GHz) ±3.92dB 5 All emissions, radiated(>1GHz) ±4.28dB 6 Temperature ±0.1°C 7 Humidity ±1.0% Page 7 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

TCT Report No.: TCT180514E027 6. Test Results and Measurement Data 6.1.Antenna Requirement Standar d requirement: FCC Part15 C Section 15.203 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. E.U.T Antenna: The EUT antenna is internal antenna which permanently attached, and the best case gain of the ante nna is 2.20Bi. 0 19 20 i Antenna 50 60 70 80 9010 2] 5 S EJ Rl B e e( ces e PnA o i ons s Page 8 of 30 Hotline: 400—6611—140 Tel: 86—755—27673339 Fax: 86—755—27673332 htip://www.tct—lab.com

Report No.: TCT180514E027 6.2. Conducted Emission 6.2.1. Test Specification Test Requirement: FCC Part15 C Section 15.207 Test Method: ANSI C63.10:2013 Frequency Range: 150 kHz to 30 MHz Receiver setup: RBW=9 kHz, VBW=30 kHz, Sweep time=auto Frequency range Limit (dBuV) (MHz) Quasi-peak Average Limits: 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 Test Setup: Test Mode: Transmitting mode with modulation 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please Test Procedure: refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10:2013 on conducted measurement. Test Result: N/A Page 9 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 6.3. Radiated Emission Measurement 6.3.1. Test Specification Test Requirement: FCC Part15 C Section 15.209/ Part 2 J Section 2.1053 Test Method: ANSI C63.10:2013 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3m Antenna Polarization: Horizontal & Vertical Frequency Detector RBW VBW Remark 9kHz- 150kHz Quasi-peak 200Hz 1kHz Quasi-peak Value 150kHz- Quasi-peak 9kHz 30kHz Quasi-peak Value Receiver Setup: 30MHz 30MHz-1GHz Quasi-peak 120kHz 300kHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz Peak 1MHz 10Hz Average Value Frequency Limit (dBuV/m @3m) Remark Limit(Field strength of the fundamental signal): 902MHz-928MHz 94.00 Peak Value Frequency Limit (dBuV/m @3m) Remark 0.009-0.490 2400/F(KHz) Quasi-peak Value 0.490-1.705 24000/F(KHz) Quasi-peak Value 1.705-30 30 Quasi-peak Value 30MHz-88MHz 40.0 Quasi-peak Value Limit(Spurious Emissions): 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at Limit (band edge) : least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber in below 1GHz, 1.5m above the ground in above 1GHz. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the Test Procedure: interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make Page 10 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. For radiated emissions below 30MHz 30MHz to 1GHz Test setup: Above 1GHz (The diagram below shows the test setup that is utilized to make the measurements for emission from 1GHz to the tenth harmonic of the highest fundamental frequency or to 40GHz emissions, whichever is lower.) Page 11 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Test results: PASS Page 12 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 6.3.2. Test Instruments Radiated Emission Test Site (966) Name of Serial Manufacturer Model Calibration Due Equipment Number ROHDE&SCHW Test Receiver ESVD 100008 Sep. 27, 2018 ARZ ROHDE&SCHW Spectrum Analyzer FSQ 200061 Sep. 27, 2018 ARZ EM Electronics Pre-amplifier Corporation EM30265 07032613 Sep. 27, 2018 CO.,LTD Pre-amplifier HP 8447D 2727A05017 Sep. 27, 2018 Loop antenna ZHINAN ZN30900A 12024 Sep. 27, 2018 Broadband Antenna Schwarzbeck VULB9163 340 Sep. 27, 2018 Horn Antenna Schwarzbeck BBHA 9120D 631 Sep. 27, 2018 Horn Antenna Schwarzbeck BBH 9170 582 Sep. 27, 2018 Antenna Mast Keleto CC-A-4M N/A N/A Coax cable TCT RE-low-01 N/A Sep. 27, 2018 (9KHz-1GHz) Coax cable TCT RE-high-02 N/A Sep. 27, 2018 (9KHz-40GHz) Coax cable TCT RE-low-03 N/A Sep. 27, 2018 (9KHz-1GHz) Coax cable TCT RE-high-04 N/A Sep. 27, 2018 (9KHz-40GHz) Shurple EMI Test Software EZ-EMC N/A N/A Technology Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 13 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 6.3.3. Test Data Field Strength of Fundamental Frequency Peak Emission Horizontal Limits Margin (MHz) (dBuV/m) /Vertical (dBuV/m) (dB) 902.14 92.55 H 94 -1.45 902.14 90.83 V 94 -3.17 Spurious Emissions Frequency Range (9 kHz-30MHz) Frequency (MHz) Level@3m (dBμV/m) Limit@3m (dBμV/m) -- -- -- -- -- -- -- -- -- -- -- -- Note: 1. Emission Level=Reading+ Cable loss-Antenna factor-Amp factor 2. The emission levels are 20 dB below the limit value, which are not reported. It is deemed to comply with the requirement Page 14 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Frequency Range (30MHz-1GHz) Horizontal: Fundamental Frequency Page 15 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Vertical: Fundamental Frequency Page 16 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Above 1GHz Channel: 902.14MHz Peak AV Correction Emission Level Peak Frequency Ant. Pol. AV limit Margin reading reading Factor Peak AV limit (MHz) H/V (dBµV/m) (dB) (dBµV) (dBµV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) 1816.84 H 43.15 --- -2.38 40.77 --- 74.00 54.00 -13.23 2725.26 H 38.67 --- 0.57 39.24 --- 74.00 54.00 -14.76 --- --- --- --- --- --- --- --- --- --- 1816.84 V 40.74 --- -2.38 38.36 --- 74.00 54.00 -15.64 2725.26 V 39.26 --- 0.57 39.83 --- 74.00 54.00 -14.17 --- --- --- --- --- --- --- --- --- --- Note: 1. Emission Level=Peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss – Pre-amplifier 2. Margin (dB) = Emission Level (Peak) (dBµV/m)-Average limit (dBµV/m) 3. The emission levels of other frequencies are very lower than the limit and not show in test report. 4. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 5. Data of measurement shown “---“in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. Page 17 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Band Edge Requirement Quasi-peak Correction Quasi-peak Frequency Ant. Pol. limit Margin (MHz) H/V reading Factor Emission Level (dBµV/m) (dB) (dBµV) (dB/m) (dBµV/m) 902 H 38.75 5.65 44.40 46.00 -1.60 928 H 32.14 5.74 37.88 46.00 -8.12 902 V 38.62 5.65 44.27 46.00 -1.73 928 V 33.19 5.74 38.93 46.00 -7.07 Note: 1. Emission Level= Quasi-peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss – Pre-amplifier 2. Margin (dB) = Emission Level (Quasi-peak )(dBµV/m)-( Quasi-peak) limit (dBµV/m) 3. The emission levels of other frequencies are very lower than the limit and not show in test report. 4. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 5. Data of measurement shown “---“in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. Page 18 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 6.4. 20dB Occupied Bandwidth 6.4.1. Test Specification FCC Part15 C Section 15.215(c)/ Part 2 J Section Test Requirement: 2.1049 Test Method: ANSI C63.10: 2013 Limit: N/A 1. According to the follow Test-setup, keep the relative position between the artificial antenna and the EUT. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Use the following spectrum analyzer settings for 20dB Bandwidth measurement. Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel; RBW≥1% of the 20 dB bandwidth; VBW≥RBW; Sweep = auto; Detector function = peak; Trace = max hold. 4. Measure and record the results in the test report. Test setup: Test Mode: Transmitting mode with modulation Test results: PASS 6.4.2. Test Instruments RF Test Room Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer Agilent N9020A MY49100060 Sep. 27, 2018 Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 19 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 6.4.3. Test data 20dB Occupy Test Channel Limit Conclusion Bandwidth (kHz) 902.14 28.07 --- PASS Test plots as follows: Page 20 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Appendix A: Photographs of Test Setup Product: wireless smoke detector Model: WSDxxx Radiated Emission Page 21 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Appendix B: Photographs of EUT Product: wireless smoke detector Model: WSDxxx External Photos Page 22 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 23 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Product: wireless smoke detector Model: WSDxxx Internal Photos Page 24 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 25 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 26 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 27 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 28 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 Page 29 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT180514E027 *****END OF REPORT***** Page 30 of 30 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com


Document Created: 2018-06-20 13:54:39
Document Modified: 2018-06-20 13:54:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC