Test Report

FCC ID: 2ADZR7577WPONAPE

Test Report

Download: PDF
FCCID_3956519

FCC PART 15.255 TEST REPORT For Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone, Shanghai, China 201206 FCC ID: 2ADZR7577WPONAPE Report Type: Product Name: Original Report WPON Report Number: RSH180530050-00B Report Date: 2018-06-07 Jerry Zhang EMC Manager Reviewed By: Bay Area Compliance Laboratories Corp. (Dongguan) Test Laboratory: No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................4 FAR FIELD BOUNDARY CALCULATIONS ......................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION ......................................................................................................................6 EUT EXERCISE SOFTWARE ..........................................................................................................................................6 EQUIPMENT MODIFICATIONS .......................................................................................................................................6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................6 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 FCC§1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ...............................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 FCC§15.203 - ANTENNA REQUIREMENT............................................................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 ANTENNA CONNECTOR CONSTRUCTION ....................................................................................................................11 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS ....................................................................................12 APPLICABLE STANDARD ............................................................................................................................................12 EUT SETUP ................................................................................................................................................................12 EMI TEST RECEIVER SETUP .......................................................................................................................................12 TEST PROCEDURE ......................................................................................................................................................13 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................13 TEST RESULTS SUMMARY ..........................................................................................................................................13 TEST DATA ................................................................................................................................................................13 FCC§15.205, §15.209&§15.255(D)- TRANSMITTER SPURIOUS EMISSIONS .................................................16 APPLICABLE STANDARD ............................................................................................................................................16 EUT SETUP ................................................................................................................................................................16 TEST EQUIPMENT SETUP ............................................................................................................................................17 TEST PROCEDURE ......................................................................................................................................................18 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................18 ENVIRONMENTAL CONDITIONS ..................................................................................................................................19 TEST DATA ................................................................................................................................................................19 §15.255(A) (H)– OPERATION RESTRICTION AND GROUP INSTALLTION.................................................25 APPLICABLE STANDARD ............................................................................................................................................25 RESULT OF OPERATION RESTRICTION ........................................................................................................................25 RESULT OF GROUP INSTALLATION .............................................................................................................................25 Page 2 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B GENERAL INFORMATION Product Description for Equipment under Test (EUT) EUT Name: WPON EUT Model: WPON AP-Ext FCC ID: 2ADZR7577WPONAPE Rated Input Voltage: AC 100-240V External Dimension: 246mm(L)* 160 mm(W)*73mm(H) Serial Number: 180530050 EUT Received Date: 2018.05.21 Objective This type approval report is prepared on behalf of Nokia Shanghai Bell Co. Ltd. in accordance with Part 2- Subpart J, and Part 15-Subparts A, B and C of the Federal Communication Commissions rules. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, and section 15.203 15.205 15.207 15.209 and 15.255 rules. This device is a modified version based on model: WPON AP-Pole, FCC ID: 2ADZR7577WPONAPP, granted on 2018-07-17, the difference is the 60 GHz module 2 & 3 and related antennas of Model: WPON AP-Pole were removed by the applicant, the enclosure, PCB boards, 60 GHz module 1 & BT with antennas are fully identical. The change made to the device affected AC Line Conducted Emissions test, and Spurious Emissions test, the data for the items recorded in this report, the other items please refer to the related report for FCC ID: 2ADZR7577WPONAPP Related Submittal(s)/Grant(s) FCC Part 15C DSS submissions with FCC ID: 2ADZR7577WPONAPE. Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 897218,the FCC Designation No. : CN1220. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062D. Page 3 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCS 30 830245/006 2017-12-11 2018-12-11 R&S Two-line V-network ENV 216 101614 2017-12-08 2018-12-08 R&S Test Software EMC32 Version8.53.0 N/A N/A Unknown Coaxial Cable C-NJNJ-50 C-0200-01 2017-09-05 2018-09-05 R&S EMI Test Receiver ESCI 100224 2017-12-11 2018-12-11 Sunol Sciences Antenna JB3 A060611-1 2017-11-10 2020-11-10 HP Amplifier 8447D 2727A05902 2017-09-05 2018-09-05 R&S Spectrum Analyzer 8564E 3943A01781 2018-01-04 2019-01-04 Farad Test Software EZ-EMC V1.1.4.2 N/A N/A Unknown Coaxial Cable C-NJNJ-50 C-0400-01 2017-09-05 2018-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0075-01 2017-09-05 2018-09-05 Unknown Coaxial Cable C-NJNJ-50 C-1000-01 2017-09-05 2018-09-05 TDK RF Horn Antenna HRN-0118 130 084 2016-01-05 2019-01-04 Mini Pre-amplifier ZVA-183-S+ 5969001149 2017-09-05 2018-09-05 R&S Spectrum Analyzer FSP 38 100478 2017-12-08 2018-12-08 Ducommun 1007726-01 Horn Antenna ARH-4223-02 2016-11-18 2019-11-18 Technolagies 1304 Ducommun 1007726-01 Horn Antenna ARH-2823-02 2016-11-18 2019-11-18 Technolagies 1302 QLW- Quinstar Amplifier 15964001001 2017-06-27 2018-06-27 18405536-JO WR19/M19H OML Harmonic Mixer U60313-1 2016-10-14 2019-10-14 WD OML Horn Antenna M19RH 11648-01 2016-10-14 2019-10-14 Agilent Agilent Harmonic Mixer 2521A01767 2016-12-07 2019-12-07 11970V Flann Micowave Horn Antenna 861V/385 736 2016-12-07 2019-12-07 WR12/M12H OML Harmonic Mixer E60120-1 2016-10-19 2019-10-19 WD OML Horn Antenna M12RH E60120-2 2016-10-19 2019-10-19 WR08/M08H OML Harmonic Mixer F60313-1 2016-10-24 2019-10-24 WD OML Horn Antenna M08RH F60313-2 2016-10-24 2019-10-24 WR05/M05H OML Harmonic Mixer G60106-1 2016-10-27 2019-10-27 WD OML Horn Antenna M05RH G60106-2 2016-10-27 2019-10-27 DET-15- millitech RF Detector A18521 2017-12-15 2019-12-15 RPFW0 Digital Phosphor Tektronix TDS 3054 B015264 2017-07-18 2018-07-18 Oscilloscope Agilent Signal Generator E8247C MY43321350 2017-12-11 2018-12-11 mm-Wave Source Agilent 83557A 2735A00145 2017-08-16 2019-08-15 Modules UNI-T Multimeter UT39A M130199938 2018-05-09 2019-05-09 High Temperature Dongzhixu DP1000 201105083-4 2017-08-28 2018-08-28 Test Chamber OML Diplexer DPL.26 EM-128 2016-10-11 2019-10-10 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Page 4 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B FAR Field Boundary Calculations The far-field boundary is given in ANSI C63.10-2013: Where: D is the largest dimension of the antenna aperture in m and is the free-space wavelength in m at the frequency of measurement. The minimum test distance for the frequency range 40GHz-200GHz determine as below: Largest Dimension Minimum Test Frequency Range of the Horn Manufacturer Model Distance Rm (GHz) Antenna (m) (mm) OML M19RH 40-60 46.3 0.57 Alpha Industries 861V/385 50-75 43.7 0.64 OML M12RH 60-90 30.02 0.36 OML M08RH 90-140 19.7 0.23 OML M05RH 140-220 12.5 0.30 Note: the maximum antenna dimension of the EUT was 18 mm. This length is smaller than the largest dimension of the smallest Horn Antenna used to measure up in the frequency range 40 GHz to 140 GHz. and larger than 140GHz to 220GHz. Given that the test distances used were 1.0 m from 40 GHz to 90 GHz, and 0.5 m from 90 GHz to 200 GHz, it can be seen that the EUT was always in the Far-field of the Receive Antenna during all Radiated Emissions Tests. Page 5 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B SYSTEM TEST CONFIGURATION Description of Test Configuration The system was configured for testing in Engineering Mode, which was provided by the manufacturer. The device built in a 60 GHz module, only supports SISO mode The module only supports 3 channels as below: Frequency Frequency Channel Number Channel Number (MHz) (MHz) 1 58320 3 62640 2 60480 / / EUT Exercise Software The software “QRCT3.0” was used for testing, which was provided by manufacturer. The worst condition (maximum power) was configured by system default setting. The worst data rate: 1Gbps. Equipment Modifications No modifications were made to the EUT. Local Support Equipment List and Details Manufacturer Description Model Serial Number HUAWEI GPON Terminal HG8245Q2 2102311RGB6RH1000087 Sprient SmartBits 600B DE7885 Support Cable List and Details Cable Shielding Length Ferrite Core From Port To Description Type (m) RJ45 Cable yes no 10 EUT GPON Terminal Optical Cable no no 10 EUT SmartBits Page 6 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Block Diagram of Test Setup Page 7 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B SUMMARY OF TEST RESULTS FCC Rules Description of Test Result Maximum Permissible §1.1310&§2.1091 Compliance Exposure §15.203 Antenna Requirement Compliance §15.207 (a) AC Line Conducted Emissions Compliance § 15.255 (e)(1) Occupied Bandwidth Compliance* §15.255 (c) EIRP Power Compliance* §15.255 (e) Peak Conducted Output Power Compliance* §15.255 (d) Spurious Emissions Compliance §15.255 (f) Frequency Stability Compliance* Operation Restriction And §15.255 (a)(h) Compliance Group Installation Note: Compliance*: Due to the similarity, please refer to the test report of FCC ID: 2ADZR7577WPONAPP (Test report NO.: RSH180504050-00CM2). Page 8 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B FCC§1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation Formula: Prediction of Power Density at the distance of the applicable MPE Limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: Page 9 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Calculated Data: E.I.R.P Evaluation Power Frequency MPE Limit Radio Distance Density (GHz) (dBm) (mW) (mW/cm2) (cm) (mW/cm2) 60G 58.32-62.64 31 1258.93 25 0.16 1.0 Module 1 Bluetooth 2.402-2.48 2.92 1.96 25 0.0003 1.0 Note: The output power was declared by manufacturer(Bluetooth conducted power is -2dBm, antenna gain 4.92dBi) The 60GHz radio and Bluetooth can transmit simultaneously: = S60G1/Limit60G1 + SBT/LimitBT = 0.16/1.0 + 0.0003/1.0 =0.1603 Result: The device complied with the applicable MPE Limit at the 25 cm distance. Page 10 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used. Antenna Connector Construction The EUT has 3 internal antennas, which can be seen in the EUT internal Photos. Therefore, the EUT complied with the antenna requirements stated in FCC Rules Part 15 Subpart C Section 15.203. Result: Compliant. Page 11 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS Applicable Standard FCC§15.207 EUT Setup The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207 limits. The spacing between the peripherals was 10 cm. The adapter was connected to a 120 VAC/60 Hz power source EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Page 12 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Test Procedure During the conducted emission test, the adapter was connected to the first LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Corrected Amplitude & Margin Calculation The basic equation is as follows: VC = VR + AC + VDF Cf = AC + VDF Herein, VC (cord. Reading): corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN Cf: Correction Factor The “Margin” column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 15.207. Test Data Environmental Conditions Temperature: 28 C Relative Humidity: 66 % ATM Pressure: 101.3 kPa The testing was performed by Sider Huang on 2018-06-07. Page 13 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Test Mode: Transmitting(antenna 1 active+BT) AC120 V, 60 Hz, Line: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.150000 33.4 9.000 L1 11.2 32.6 66.0 Compliance 0.188994 38.2 9.000 L1 10.7 25.9 64.1 Compliance 0.198249 38.8 9.000 L1 10.6 24.9 63.7 Compliance 0.288307 30.9 9.000 L1 10.2 29.7 60.6 Compliance 1.190776 30.1 9.000 L1 9.8 25.9 56.0 Compliance 1.249088 26.7 9.000 L1 9.8 29.3 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.201433 24.2 9.000 L1 10.6 29.4 53.6 Compliance 0.396530 21.3 9.000 L1 10.0 26.6 47.9 Compliance 0.419276 20.6 9.000 L1 10.0 26.9 47.5 Compliance 0.443327 21.1 9.000 L1 9.9 25.9 47.0 Compliance 1.144267 22.6 9.000 L1 9.8 23.4 46.0 Compliance 1.289541 21.5 9.000 L1 9.8 24.5 46.0 Compliance Page 14 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B AC120 V, 60 Hz, Neutral: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.169044 31.6 9.000 N 10.9 33.4 65.0 Compliance 0.186006 34.4 9.000 N 10.7 29.8 64.2 Compliance 0.193566 39.2 9.000 N 10.7 24.7 63.9 Compliance 0.206306 36.9 9.000 N 10.6 26.5 63.4 Compliance 0.865782 28.5 9.000 N 9.8 27.5 56.0 Compliance 1.144267 30.0 9.000 N 9.8 26.0 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.195114 25.3 9.000 N 10.7 28.5 53.8 Compliance 0.419276 20.5 9.000 N 10.0 27.0 47.5 Compliance 0.443327 21.0 9.000 N 9.9 26.0 47.0 Compliance 1.239175 25.0 9.000 N 9.8 21.0 46.0 Compliance 1.289541 22.3 9.000 N 9.8 23.7 46.0 Compliance 15.616430 20.7 9.000 N 10.0 29.3 50.0 Compliance Page 15 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B FCC§15.205, §15.209&§15.255(d)- TRANSMITTER SPURIOUS EMISSIONS Applicable Standard (d) Limits on spurious emissions: (1) The power density of any emissions outside the 57-64 GHz band shall consist solely of spurious emissions. (2) Radiated emissions below 40 GHz shall not exceed the general limits in §15.209. (3) Between 40 GHz and 200 GHz, the level of these emissions shall not exceed 90 pW/cm2 at a distance of 3 meters. (4) The levels of the spurious emissions shall not exceed the level of the fundamental emission. EUT Setup Below 1 GHz: Page 16 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B 1-26.5 GHz: 1-26.5GHz:3m 26.5-40 GHz: 1m Above 40GHz: The antenna is scanned around the entire perimeter surface of the EUT, in both horizontal and vertical polarizations, at the distance of 1.0 m from 40 GHz to 90 GHz, and 0.5 m from 90 GHz to 200 GHz. The radiated emission and out of band emission tests were performed in the 3 meters chamber test site A, using the setup accordance with the ANSI C63.10-2013 The specification used was the FCC 15.209/15.205 and FCC 15.255 limits. Test Equipment Setup The system was investigated from 30 MHz to 200 GHz. Page 17 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30 MHz – 1000 MHz 120 kHz 300 kHz 120 kHz QP 1MHz 3 MHz / PK 1-40 GHz 1MHz 10 Hz / Ave 40 GHz – 200 GHz 1MHz 3 MHz / PK Test Procedure Refer to ANSI C63.10-2013 Clauses 9.9, 9.12, and 9.13. A Maximizing procedure was performed to ensure that the highest emissions from the EUT were actually measured in all of the Test Arrangements of the EUT and Local Support Equipment. In accordance with FCC Rules Part 15 Subpart A Section 15.35, from 30 MHz to 1 GHz all radiated emissions measurements were made using a Quasi-peak Detector, and from 1 GHz to 40 GHz, all radiated emissions measurements were made using a Peak Detector and CISPR Average Detector. In accordance with FCC Rules Part 15 Subpart C Section 15.255, from 40 GHz to 200 GHz, all radiated emissions measurements were made using a Peak Detector. According to C63.10, the 26.5-40GHz test result shall be extrapolated to the specified distance using an extrapolation factor of 20dB/decade from 3m to 1m Distance extrapolation factor =20 log (specific distance [3m]/test distance [1m]) dB= 9.54 dB All emissions under the average limit and under the noise floor have not recorded in the report. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected = Antenna Loss + Cable Loss - Amplifier Gain Or Corrected Amplitude = Antenna Loss + Cable Loss - Amplifier Gain- Distance extrapolation factor The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Result = Reading + Corrected Margin = Limit - Result Page 18 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Environmental Conditions Temperature: 29.4 C Relative Humidity: 37 % ATM Pressure: 101.3 kPa The testing was performed by Steven Zuo,Vern Shen on 2018-05-21. Test Data Please refer to the following table: Test Mode: Transmitting(ANT 1 was the worst) 30MHz-1GHz (Middle channel was the worst) Horizontal Frequency Reading Corrected Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dB) 67.8300 37.89 QP -11.59 26.30 40.00 13.70 250.1900 35.58 QP -6.18 29.40 46.00 16.60 375.3200 30.86 QP -2.66 28.20 46.00 17.80 600.3600 35.50 QP 0.90 36.40 46.00 9.60 800.1800 36.61 QP 4.59 41.20 46.00 4.80 875.8400 30.17 QP 5.53 35.70 46.00 10.30 Page 19 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Vertical Frequency Reading Corrected Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dB) 40.6700 40.87 QP -6.37 34.50 40.00 5.50 66.8600 42.96 QP -11.66 31.30 40.00 8.70 500.4500 37.81 QP -0.31 37.50 46.00 8.50 600.3600 37.20 QP 0.90 38.10 46.00 7.90 700.2700 34.31 QP 3.19 37.50 46.00 8.50 800.1800 31.61 QP 4.59 36.20 46.00 9.80 Page 20 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B 1GHz - 40GHz(Middle channel was the worst) Horizontal Frequency Reading Corrected Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dB) 7290.000 42.75 peak 12.44 55.19 74.00 18.81 7290.000 38.97 AVG 12.44 51.41 54.00 2.59 17891.026 34.85 peak 28.47 63.32 74.00 10.68 17891.026 22.17 AVG 28.47 50.64 54.00 3.36 25028.846 39.86 peak 10.88 50.74 74.00 23.26 25028.846 29.66 AVG 10.88 40.54 54.00 13.46 39433.000 48.38 peak 15.90 64.28 74.00 9.72 39433.000 35.84 AVG 15.90 51.74 54.00 2.26 Page 21 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Vertical Frequency Reading Corrected Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dB) 7290.000 40.60 peak 12.44 53.04 74.00 20.96 7290.000 33.33 AVG 12.44 45.77 54.00 8.23 18000.000 35.29 peak 28.33 63.62 74.00 10.38 18000.000 21.98 AVG 28.33 50.31 54.00 3.69 26500.000 40.37 peak 11.11 51.48 74.00 22.52 26500.000 30.42 AVG 11.11 41.53 54.00 12.47 39055.000 50.15 peak 16.21 66.36 74.00 7.64 39055.000 37.00 AVG 16.21 53.21 54.00 0.79 Page 22 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B Page 23 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B 40GHz~200GHz: Receiver Rx Antenna Corrected EIPR Power Frequency Limit Amplitude Power Density Reading Detector Polar Factor GHz dBμV PK/QP/AV H/V dB(1/m) dBμV/m dBm pW/cm^2 pW/cm^2 Frequency: 58.32 GHz 47.9 38.90 PK H 40.33 79.23 -25.47 2.51 90 47.9 39.12 PK V 40.33 79.45 -25.25 2.64 90 77.55 42.98 PK H 45.87 88.85 -15.85 22.99 90 77.55 43.10 PK V 45.87 88.97 -15.73 23.64 90 116.64 45.87 PK H 53.18 99.05 -11.67 60.2 90 116.64 44.10 PK V 53.18 97.28 -13.44 40.05 90 Frequency: 60.48GHz 48.9 38.00 PK H 40.52 78.52 -26.18 2.13 90 48.9 38.67 PK V 40.52 79.19 -25.51 2.49 90 63.14 42.30 PK H 43.18 85.48 -19.22 10.58 90 63.14 43.67 PK V 43.18 86.85 -17.85 14.51 90 120.96 44.58 PK H 53.98 98.56 -12.16 53.77 90 120.96 44.90 PK V 53.98 98.88 -11.84 57.88 90 Frequency: 62.64GHz 50.12 39.14 PK H 40.75 79.89 -24.81 2.92 90 50.12 39.89 PK V 40.75 80.64 -24.06 3.47 90 80.65 44.12 PK H 46.45 90.57 -14.13 34.16 90 80.65 45.32 PK V 46.45 91.77 -12.93 45.04 90 125.28 43.02 PK H 54.79 97.81 -12.91 45.24 90 125.28 45.02 PK V 54.79 99.81 -10.91 71.71 90 Note 1: Note 2:The test distance is 1 m. for 40-90GHz, and 0.5m for 90-200GHz Note 3:Corrected Amplitude = Meter Reading + Antenna Factor Note 4: The Mixers and it`s RF cables is compose a system for calibration, the conversion factor was added into the test Spectrum Analyzer in testing. Note 5: The Specified distance is 3m. Page 24 of 25

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSH180530050-00B §15.255(a) (h)– OPERATION RESTRICTION AND GROUP INSTALLTION Applicable Standard §15.255 (a) Operation under the provisions of this section is not permitted for the following products: (1) Equipment used on aircraft or satellites. (2) Field disturbance sensors, including vehicle radar systems, unless the field disturbance sensors are employed for fixed operation. For the purposes of this section, the reference to fixed operation includes field disturbance sensors installed in fixed equipment, even if the sensor itself moves within the equipment. §15.255 (h) Any transmitter that has received the necessary FCC equipment authorization under the rules of this chapter may be mounted in a group installation for simultaneous operation with one or more other transmitter(s) that have received the necessary FCC equipment authorization, without any additional equipment authorization. However, no transmitter operating under the provisions of this section may be equipped with external phase-locking inputs that permit beam-forming arrays to be realized. Result of Operation Restriction The Manufacturer declared that the EUT will not be advertised or sold for use on aircraft or satellites. The user manual includes a statement that cautions users that it is not permitted to use the product on aircraft or satellites. Result of Group installation The frequency, amplitude and phase of the transmit sign al are set within the EUT. There are no external phase-locking inputs or any other means of combining two or more units together to realize a beam- forming array ***** END OF REPORT ***** Page 25 of 25


Document Created: 2018-08-07 16:56:22
Document Modified: 2018-08-07 16:56:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC