User manual

FCC ID: 2ADZC-HLWH200

Users Manual

Download: PDF
FCCID_4055570

WIRELESS HDMI EXTENDER USER MANUAL Version1.0

4sm 4 U 0 o Transmitter: 1pcs 9 Receiver : 1pcs 3 © o Antenna: 4pcs @ IR Emitter: 1pcs e 5V/2A Power Adapter(Pair Locked Adapter) : 2pcs @ IR Receiver: 1pcs





PRODUCT INSTALLATION AND USING INTRODUCTION N Equipment installation and use 1, user can directly put transmitter and receiver on fixed area( suggest to put 2m above ground) and install high— gain antennas on the device and power it normally; 2, connect DVD or other sources with transmitter by HDMI cable, and connect display or TV with receiver by HDML cable; _/ l e e e e e J )




This product can be used across EU member states. The plug considered as disconnect device of adapter(Manufacturer : Dongguan Winna Electronic Technology Co., Ltd. Model: YN12W-0500200VZ Input: AC 100-240V, 50/60Hz, 0.3A; Output: DC 5V/2.0A) Extreme temperature: -10-45 The device is restricted to indoor use only when operating in the 5G WLAN band in the following countries:

Model Number: HLWH200B, HLWH200C, HLWH200D, Mizar 600, Mizar 600B, Mizar 600C Model Declaration:PCB board, structure and internal of these model(s) are the same, So no additional models were tested.

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi

EU Declaration of Conformity for Radio Equipment Directive 2014/53/EU We, Shenzhen Hollyland Technology Co.,Ltd ___________________________________________________________________________ hereby, declare that the essential requirements set out in the Radio Equipment Directive 2014/53/EU have been fully fulfilled on our product with indication below: Product Name: WIRELESS HDMI EXTENDER Model / Brand Name: HLWH200B, HLWH200C, HLWH200D, Mizar 600, Mizar 600B, Mizar 600C / HOLLYLAND The following standards have been applied for the investigation of compliance: ETSI EN 301 489-1 V2.1.1 (2017-02) Final draft ETSI EN 301 489-3 V2.1.1 (2017-03) ETSI EN 301 489-17 V3.1.1(2017-02) EN 55032: 2015 EN 55035: 2017 ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.1.1 (2017-03) EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013 EN 62311: 2008 And apply notified body assessment: Notified Body number 0700 PHOENIX TESTLAB GmbH Königswinkel 10 D-32825 Blomberg Germany

Hardware Version: v2 Software Version: v2 Support equipment List Adapter Charger Manufacturer: Dongguan Winna Electronic Technology Co., Ltd. Model name: YN12W-0500200VZ Ratings: Input: AC 100-240V, 50/60Hz, 0.3A MAX; Output: DC 5V/2.0A Antenna Two same SMA Antenna; support MIMO technology ANT0&ANT1 are used for WIFI TX/RX, 5.0dBi(Max.) for 5G Band Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection. Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration.

European Representative Manufacturer Contact Company: Shenzhen Hollyland Technology Co.,Ltd 6/F, 3rd Bldg., 2nd South Zone, Honghualing Industrial Address: Park, No.1213 Liuxian Avenue, Xili Town, Nanshan Distric, Shenzhen 518055 China Name/Title: Vincent Ma / Sales Director Tel. No.: +86-755-86000682 Fax No.: +86-755-83940008 E-Mail: vincent.ma@hollyland-tech.com Signature Date : 2018-10-10


Document Created: 2018-10-26 15:24:20
Document Modified: 2018-10-26 15:24:20
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC