User manual

FCC ID: 2ADXC18IR388

Users Manual

Download: PDF
FCCID_4086174

· Important Safety Notice 4. Metal casing, stable and durable. It turns on when remote control Paring configuration instruction: IR indicator 5. Extend Remote Control Signals Wirelessly. 1. Power via the USB power cable to connect with power supply. Please read below safety instructions carefully before installation and IR receiver head Built-in IR signal receiver head 6. Long wireless distance is up to 200m , distance may var y due to 2. Long press RX’s”Lock ID ”button up to 4s until it enters into pairing operation: obstacles. Power input Connect with the USB cable mode (the status of IR indicator from keeps on to flashes per second) 1. Please pay attention to all the warnings and hints on this device. 7. Include a IR transmitter and a IR receiver, working as a pair. 2. Do not expose this unit to rain, moisture and liquid. It is used for TX is paired with RX, long press this 3. Long press TX’s”Lock ID ”button up to 4s until TX is paired with 3. Do not put any stuff into the device. 5 Lock ID button button 4s after RX entered into pairing mode to RX (the status of IR indicator from on to off ) . 4. Do not repaire the device or open the enclosure without professional finish pairing Note: TX and RX must paired with each other before using. person guidence to avoid electronic shock . · Package Contents 2. IR receiver unit (RX) 5. Make sure good ventilation openings to avoid product overheating Connection instruction: damage. 1. Put the Transmitter unit in the room where you want to control your 6. Shut off power and make sure environment is safe before installation. devices from, plug the IR receiver cable to into the IR IN port to 7. Powered by USB cable. receiver IR signal when this cable is needed. 8. If it is found that it's unstable when powered by USB cable directly, 2. Put the Receiver unit near the devices you are tr ying to antrol. Plug please add a 5V plug(with USB port) to connect with the USB cable IR transmitter IR receiver USB Cable the IR blaster extension cable into the IR OUT port to send IR signal for power supply. x2pcs unit x1pcs unit x1pcs 5 when this cable is needed. 3. Reconnect with power supply via the USB power cable, the IR extender Connect with IR blaster extension cable, send IR · Introduction IR OUT port signal kits working. This IR signal wireless extender includes IR transmitter unit and IR It turns on when remote control Note: The product uses the same wireless frequency, if you use multiple IR indicator receiver unit, is designed to get your remote control's signal to pairs of this IR wireless extender, only one pair product works. where it needs to go, there is no need to run a wire from the IR IR blaster extension IR receiver extension User manual IR emitter head Built-in IR signal emitter head receiver end of your setup to where the devices are located. Since cable x1pcs cable x1pcs x1pcs Power input Connect with the USB cable IR signals need line-of-sight to work , you will need this extender if the equipment you're tr ying to control is not in sight. You'll need It is used for TX is paired with RX, RX enters into · FAQ 5 Lock ID button pairing mode after long press this button 4s to extend your IR signals, especially if your TV is wall-mounted. · Panel Description Q: The IR remote control is not useful? Note: A: 1 ) If using the IR cable, situate the IR extender IR cable head near 1. IR transmitter unit (TX) 1 ) Transmission distance will be different due to the environment. the IR sensor receiving window of the device you wish to control. 2 ) Wall, brick or glass will shorten the signal cover range or cause · Connection The distance should be within 0.5m big signal loss. 2 ) Position the IR receiver unit to face the IR sensor receiving window of the device you are controlling, the distance is within 7m Transmitter Receiver · Features (TX) (RX) 3 ) Make sure there is a wireless transmission between IR transmitter 1. Wide IR frequency 20 to 60 KHz, compatible 5 HDMI display unit and IR receiver unit. with any IR equipped device. IR input Q: IR indicator of TX/RX keeps on even though there is no operation IR IN port Connect with IR receiver cable, receiver IR signal IR output 2. Low power consumption. on TX/RX? 3. Portable size design.

A: Move TX unit to a dark place to avoid interference of the environment. This equipment has been tested and found to comply with the limits for a Class Q: IR indicator of RX flashes per second even though there is no B digital device, pursuant to part 15 of the FCC Rules. These limits are designed operation on RX? to provide reasonable protection against harmful interference in a resi dential A: Restart the RX unit. installation. This equi pment generates, uses and can radiate radio frequency IR Signal Wireless Extender energy and, if not i nstalled and used i n accordance with the instructions, may · Specification cause harmful interference to radio communications. However , there is no LKV388IR-915 guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is Material aluminum encouraged to try to correct the interference by one or more of the following Transmission Frequency 909MHz, 915MHz, 921MHz measures: IR frequency 20-60KHz ·Reorient or relocate the receiving antenna. Transmission distance 200m ·Increase the separation between the equipment and receiver . No power supply attached, use ·Connect the equipment into an outlet on a circuit different from that to  Power supply micro usb cable. which the receiver is connected. Power consumption TX: ＜300MW; RX: ＜300MW ·Consult the dealer or an experi enced radio/TV technician for help. Dimension 95(W) x 120.58(D) x 20.1(H)mm Weight TX：40g，RX：40g Caution: Any changes or modifications to this device not explicitly Working temperature 0～40℃ approved by manufacturer could void your authority to operate this Storage temperature -20～60℃ equipment. Operating Humidity 10~90%（non-condensing） This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditi ons: (1) This devi ce may not cause harmful interference, and (2) this devi ce must accept any interference received,including i nterference that may cause undesi red operation. Disclaimer This equipment complies with FCC radiation exposure limits set forth for an The product name and brand name may be registered trademark of related uncontrolled environment. This equipment should be installed and operated manufacturers.TM and ® may be omitted on the user manual. The pictures with minimum distance 20cm between the radiator and your body. on the user manual are just for reference, and there may be some slight This transmitter must not be co-located or operating in conjunction with any other difference with the real products. antenna or transmitter. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.


Document Created: 2018-11-20 15:16:05
Document Modified: 2018-11-20 15:16:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC