RF Exposure Info

FCC ID: 2ADUL0220

RF Exposure Info

Download: PDF
FCCID_4306197

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Report No.: GZEM190301152902 Fax: +86 (0) 20 82075059 Page: 1 of 10 Email: ee.guangzhou@sgs.com TEST REPORT Application No.: GZEM1903011529CR Applicant: Greater Goods,LLC Address of Applicant: 4427 Chouteau Ave.St.Louis,Mo,63110,Unite States Manufacturer: Zhongshan Transtek Electronics Co.,Ltd Address of Manufacturer: No. 23,Jin'an Road, Minzhong, Zhongshan ,Guangdong, China Factory: Zhongshan Transtek Electronics Co.,Ltd Address of Factory: No. 23,Jin'an Road, Minzhong, Zhongshan ,Guangdong, China Equipment Under Test (EUT): EUT Name: Bluetooth Baby Scale Model No.: BS-1711-B,0220 Standard(s) : 47 CFR Part 1.1307, Part 2.1093, KDB 447498 Date of Receipt: 2019-03-26 Date of Test: 2019-04-04 to 2019-04-09 Date of Issue: 2019-05-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Kobe Jian Lab Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2019-05-05 Original Authorized for issue by: Tested By 2019-04-04 to 2019-04-09 Lily_Kuang /Project Engineer Date Checked By 2019-05-05 Ricky_Liu /Reviewer Date

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 3 of 10 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result 47 CFR Part 1.1307, RF Exposure Part 2.1093, KDB CFR 47 Part 2.1093 CFR 47 Part 2.1093 Pass 447498

SGS—CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 4 of 10 3 Contents Page 1 COV@F PAG@.............«c«ssrssrrrrsrrrrrrrrrsrrrsssrssssssssssssssssrsssssssssssssssssssrsssrssrxssssrsssssssssssssssssssssssaaasaaassskssskksskkkkkkksnnnns 1 2 Te@St SUMIM@FY...............ccccsccosssnssssnssssnssssssssssssssersrrrssrssssssssssssssssssssssssaaasaaaaaaaasssassssasskksskkkkkkkksskkksskksaaa8aaaanan ns 3 3 CONI@MTS ...........csss00ssserrrrrrnnnnnirrrrrrrrrnnnsnsrrarrr snn nnn en rrnnnnnnnn in rrr n n snn n n n n n n in n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n ns 4 4 GeN@er@l INnfOFM@TION .................ssssssssssssssrrrrrssssssrerrrrssssssrrrrrrrrrsnnsnnrrarrrrr snn snn n ar n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n ns 5 4.1 DEet@il$ Of E.U.T.......2202222222240r¥r¥¥¥eeerrrrrrerrrrrrerrrr se se vrrreresrrrrressrrrrrresrrrrrsssrrrrrsserrrrrrsrrrer se se rr iss se a ie es se aa e e ks k a00 5 4.2 Description Of SUPPOFt UNItS .............22...222222222rrrrrrvvvvrvvvrvvrrssrrsssssssssssr se s iss i ie i i se rrrrrrrrrrrrrer e e e e e e e e e e e e e e k e k a04 5 4.3 M EET )c iae blaleclee ts e 5 4.4 CSc( e 5 4.5 T@St FACIIItY .....22222222220020222rr¥4464¥¥¥r iss r¥rvvvasvrrrrvvrrrrv s i rrev is i rrr kess is a k es ki ar k k k e i¥ r¥ k k ki is¥ k k k e ki 6k k k k ki e 6k k e aaa e e k e e e ie e e e k e w aa en 6 4.6 DPEMEii(e s (colupfheic ale CleoC 7 4.7 Abnormalities from Stand@rd CONQItiONS .................00000000022rrer e r s rr se e e e e e e e rrr e e e e rr e e e e e e e e e e e e e e e e e e e e a e e e es 7 5 Equiipment LiISt . . . . . . . . . . . ... mm mm mm mm mm n n m en nn n n nnn n n en n n n en ies na en kn n n n n es8 6 RF Exposure CoOmpliance Re@QUIF@M@NT................c.cccssssssssssssssssssssssrsssrrssrrrssrrssrssssssssssssssssssrssssrsssasssa888008 9 7 P HOTOGFAD NS . . . 2 2 2 2 2200000000000 mm im m mm i i in n n n n i i i n n m i w e n w e n n e w i n m n n e w i n n e w i n n n e n i n n n w n i n e i n i n n n n i i n e i n i n n e i i i n e w i i n w n n i 10 7.1 EUT CONStrUCtiON@I D@QtAIIS............2222222002226¥¥¥¥¥¥¥¥¥err e rrrrrrrvrvrrrrrrrrerrrrvrrrrirr i se e rrrarr i i i i ie i se aaarr ie e e e e e e raaa e 00 10 Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sqs.com/en/Terms—and—Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sqs.com/en/Terms—and—Conditions/Terms—e—Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, for%ery or falsification of the content or c cepmtne * appearance of this document is unlawful and offenders may be prosecuted to the fullest extent the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. r«%;)Inspectlrm & Testing Services§ Attentlon To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (86—755)8307 1443, 1: CN.Doccheck@sgs.com chec es Co.Lid. No198Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 t (86—20) 82155555 f (86—20) 82075058 www.sgsgroup.com.cn BMBRRCC Laboratory. :Pl TM ZFHEXRTEEREHERRER198ES BBZ: 510663 t (86—20) 82155555 f (86—20) 82075058 sgs.china@sgs.com Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 5 of 10 4 General Information 4.1 Details of E.U.T. Power Supply: DC:6V(4*"AAA") Antenna Gain 0 dBi Antenna Type Integral antenna Channel Spacing 2MHz Modulation Type GFSK Number of Channels 40 Operation Frequency 2402MHz to 2480MHz Test software: EMI_TEST_V1.1 4.2 Description of Support Units Description Manufacturer Model No. Serial No. Laptop Lenovo T430u REF. No.SEA1800 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ±5.5 x 10-8 2 Duty cycle ±0.57% 3 Occupied Bandwidth ±3% 4 RF Conducted power ±0.68dB 5 RF Power Density ±1.50dB 6 Conducted Spurious Emissions ±1.04dB ±4.5dB (below 1GHz) 7 RF Radiated Power ±4.8dB (above 1GHz) ±4.5dB (30MHz-1GHz) 8 Radiated Spurious Emission Test ±4.8dB (1GHz-18GHz) 9 Temperature ±0.4°C 10 Humidity ±1.3% 11 Supply Voltages ±1.5% 12 Time ±3% 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted.

SGS—CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 6 of 10 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: © NVLAP (Lab Code: 200611—0) SGS—CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611—0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ©@ ACMA SGS—CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian C—Tick mark as a result of our NVLAP accreditation. e SGS UK(Certificate No.: 32), SGS—TUV SAARLAND and SGS—FIMKO Have approved SGS—CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. © CNAS (Lab Code: LO167) SGS—CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in compliance with CNAS—CLO1:2006 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of Testing Laboratories. @FCC Recognized 2.948 Listed Test Firm(Registration No.: 282399) SGS—CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 282399, May 31, 2002. @FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS—CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818, Jul 13, 2017. e Industry Canada (Registration No.: 4620B—1) The 3m/10m Alternate Semi—anechoic chamber of SGS—CSTC Standards Technical Services Co., Ltd., has been registered by Certification and Engineering of Industry Canada for radio equipment testing with Registration No. 4620B—1. ® VCCI (Registration No.: R—2460, C—2584, G—449 and T—1179) The 10m Semi—anechoic chamber and Shielded Room of SGS—CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R—2460, C—2584, G—449 and T—1179 respectively. ©@ CBTL (Lab Code: TL129) SGS—CSTC Standards Technical Services Co., Ltd., E&E Laboratory has been assessed and fully comply with the requirements of ISO/IEC 17025:2005, the Basic Rules, IECEE 01 and Rules of procedure IECEE 02, and the relevant IECEE CB—Scheme Operational documents. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overlieaf, available on request or accessible at http://www.sqs.com/en/Terms—and—Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sqs.com/en/Terms—and— Conditions/Terms—e—Document. aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, for%ery or falsification of the content or #@lfigflflgfifig appearance of this document is unlawful and offenders may be prosecuted to the fullest extent the law. Unless otherwise stated the Inspection & Testing Services results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. % @ Attentlon To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (86—755) 8307 1443, 1: CN.Doccheck@sgs.com No198KezhuRoad Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 t (86—20) 82155555 f (86—20) 82075058 www.sgsgroup.com.cn 1B +JX —ZFHRERRTEERNEHERRR198S BBZ: 510663 t (86—20) 82155555 f (86—20) 82075058 sgs.china@sgs.com I Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 7 of 10 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 8 of 10 5 Equipment List General used equipment Inventory Equipment Manufacturer Model No Cal Date Cal Due Date No DMM Fluke 73 EMC0006 2018-07-20 2019-07-19 DMM Fluke 73 EMC0007 2018-07-19 2019-07-18 Conducted Peak Output Power Inventory Equipment Manufacturer Model No Cal Date Cal Due Date No EXA Signal Analzer AgilentTechnologies N9010A EMC2138 2018-11-19 2019-11-18 6dB Attenuator HP 8491A EMC2062 2018-04-04 2020-04-03 Test Software JS1120-3 HangTianXing V2.6 GZE100-69 N/A N/A

SGS—CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 9 of 10 6 RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.10918&2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below: Transmit frequency (GHz) Power[dBm] Max CondUC(triO\'N?UTPUT Power 2. 402 5.313 3.399 2.440 5.078 3.220 2.480 4.119 2.582 The Max Conducted Peak Output Power is 5.313dBm on the lowest channel 2.402GHz 5.313dBm logarithmic terms convert to numeric result is nearly 3.399mW(the maximum power in three transmit frequencies) According to the formula, calculate the test exclusion thresholds: [(max. power of channel, including tune—up tolerance, mW)/ (min. test separation distance, mm)] -[\/f(GHz)] General RF Exposure = (3.399mW / 5 mm ) x v2.402GHz= 1.05 & ; SAR requirement: S =3.0 & ; 0) <@. So the SAR report is not required. Remark: The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1—g and 10—g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances = 50 mm are determined by: [({max. power of channel, including tune—up tolerance, mW)/({min. test separation distance, mm)] — [~f(GHz)] < 3.0 for 1—g SAR and = 7.5 for 10—g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is = 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (DOQ1) General RF Exposure Guidance v06, the SAR report is not required. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overlieaf, available on request or accessible at http://www.sqs.com/en/Terms—and—Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms—and— Conditions/Terms—e—Document. aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced E) except in full, without prior written approval of the Company. Any unauthorized alteration, for%ery or falsification of the content or tetitt# s appearance of this document is unlawful and offenders may be prosecuted to the fullest extent the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. ‘%‘/‘Inspectlon & Testing Services§ AttentlonTo checkthe authent:cny of testing /inspection report & certificate, please contact us at telephone: (86—755) 8307 1443, SGS—C gardsTechmc ferwes Co. Ltd. No198KezhuRoad SaentechPatk,GuangzhouEconomlc&TechnoIogyDeveIoprnentDlsm Guangzhou, China 510663 t (86—20) 82155555 f (86—20) 82075058 www.sgsgroup.com.cn p $y Guangrhou Ee EBC Lsboniy. PBR +TAM ~LFHERATAEREHRAR1OSE HB&H: 510663 t (86—20) 82155555 f (86—20) 82075058 sgs.china@sgs.com I Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM1190301152902 Page: 10 of 10 7 Photographs 7.1 EUT Constructional Details Please refet to Appendix A - Photographs of EUT Constructional Details for GZEM11903011529CR --End of Report—


Document Created: 2019-05-31 06:05:58
Document Modified: 2019-05-31 06:05:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC