RF Exposure Info

FCC ID: 2ADTD-M55XXHN

RF Exposure Info

Download: PDF
FCCID_3777805

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM171201235603 Fax: +86 (0) 755 2671 0594 Page: 1 of 10 Email: ee.shenzhen@sgs.com 1 Cover Page RF MPE REPORT Application No.: SZEM1712012356CR (SHEM1710007117CR) Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. FCC ID: 2ADTD-M55XXHN Equipment Under Test (EUT): NOTE: The following sample(s) was/were submitted and identified by the client as Product Name: Mobile Digital Video Recorder Model No.(EUT): DS-M5504HNI/GW/WI, M5504HNI/4G/WI Add Model No.: Refer to Page 2 Standards: FCC Rules 47 CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2017-10-23 Date of Test: 2017-10-25 to 2017-11-15 Date of Issue: 2017-11-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 2 of 10 Add Model No.: WiFi+GPS DS-M5504HNI/WI, DS-M55XXHNI/WI, DS-MP55XXHN/WI, DS-M5508HNI/WI, DS-M55XXHN/WI WiFi+GPS+3G DS-M5504HNI/GW/WI, DS-M5508HNI/GW/WI, DS-M55XXHNI/GW/WI, DS-MP55XXHN/GW/WI, DS- M55XXHN/GW/WI, DS-M55XXHN/3G/WI, DS-MP55XXHN/GW/WI58, DS-M55XXHNI/GW/WI58, DS- M55XXHN/GE/WI, WiFi+GPS+4G DS-M5504HNI/GLF, DS-M55XXHNI/GLF, DS-M55XXHN/GLF, DS-MP55XXHN/GLF, DS-M5504HNI/4G, DS-M5508HNI/4G, DS-M55XXHN/GLT, DS-M55XXHN/4G, DS-M55XXHN/5G, DS-M55XXHN/GLE,DS- M5504HNI/GLF/WI, DS-M55XXHNI/GLF/WI, DS-M55XXHN/GLF/WI, DS-MP55XXHN/GLF/WI, DS- M5504HNI/4G/WI, DS-M5508HNI/4G/WI, DS-M55XXHN/GLE/WI, DS-M55XXHN/GLT/WI, DS- M55XXHN/4G/WI, DS-M55XXHN/5G/WI, DS-MP55XXHN/GLF/WI58, DS-M55XXHNI/GLF/WI58 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 3 of 10 Revision Record Version Chapter Date Modifier Remark 00 / 2017-11-16 / Original Authorized for issue by: Foray Chen /Project Engineer Eric Fu /Reviewer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 4 of 10 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 4 3 GENERAL INFORMATION ......................................................................................................................... 5 3.1 CLIENT INFORMATION.................................................................................................................................... 5 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 5 3.2 TECHNICAL SPECIFICATIONS .......................................................................................................................... 5 3.3 TEST LOCATION ............................................................................................................................................. 6 3.4 TEST FACILITY ............................................................................................................................................... 6 4 TEST STANDARDS AND LIMITS ............................................................................................................... 7 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ................................................................................. 7 5 MEASUREMENT AND CALCULATION ................................................................................................... 8 5.1 MAXIMUM TRANSMIT POWER ........................................................................................................................ 8 5.2 MPE CALCULATION....................................................................................................................................... 9 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 5 of 10 3 General Information 3.1 Client Information Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1. Hangzhou Hikvision Technology Co., Ltd. 2. Hangzhou Hikvision Electronics Co., Ltd. Address of Factory: 1. No.700, Dongliu Road, Binjiang District, Hangzhou Ctiy,Zhejiang, 310052, China 2. No.299, Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China. 3.1 General Description of E.U.T. Brand Name: HIKVISION Product Description: Vehicular use with Enternet port ,WiFi and 3G /4G function, Test Voltage: DC 24V by Battery 3.2 Technical Specifications 802.11 b/g/n(HT20): 2412MHz~2462MHz Operation Frequency: 802.11 n(HT40): 2422MHz~2452MHz 802.11 b: DSSS(CCK, DQPSK, DBPSK) Modulation Technique: 802.11 g/n(HT20/n(HT40): OFDM(64QAM, 16QAM, QPSK, BPSK) 802.11 b: 1/2/5.5/11Mbps Data Rate: 802.11 g: 6/9/12/18/24/36/48/54Mbps 802.11 n: MCS0-7 802.11 b/g/n(HT20): 11 Number of Channel: 802.11 n(HT40): 7 Antenna Type: Integral Antenna Gain: 3.0dBi This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 6 of 10 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 7 of 10 4 Test Standards and Limits 4.1 FCC Radiofrequency radiation exposure limits: According to§1.1310, the limit for general population/uncontrolled exposures Frequency Power density(mW/cm 2) Averaging time(minutes) 300MHz~1.5GHz f/1500 30 1.5GHz~100GHz 1.0 30 For 3G 850MHz Band: the limit of worse case is 0.549 mW/cm2 For 4G 700MHz Band: the limit of worse case is 0.471 mW/cm2 For 4G 850MHz Band: the limit of worse case is 0.550 mW/cm2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 8 of 10 5 Measurement and Calculation 5.1 Maximum transmit power The Power Data is based on the RF Test Report SZEM171201235602. Test Mode Test Channel Power[dBm] Power (mW) 11B 2412 14.08 25.59 11B 2437 13.82 24.10 11B 2462 15.53 35.73 11G 2412 12.21 16.63 11G 2437 12.03 15.96 11G 2462 13.65 23.17 11N20SISO 2412 12.17 16.48 11N20SISO 2437 12.03 15.96 11N20SISO 2462 13.64 23.12 11N40SISO 2422 10.51 11.25 11N40SISO 2437 10.64 11.59 11N40SISO 2452 11.4 13.80 The power of 3G band & 4G band base on the FCC Certificate module of MU609: FCC ID: QISMU609 and the module of ME909u-523: FCC ID:QISME909u-523.. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 9 of 10 5.2 MPE Calculation For WIFI The Max Conducted Average Output Power is 35.73mW; For 3G 850MHz band the Max Output power is 1.64W. For 3G 1900MHz band the Max Output power is 0.81W. For 4G 700MHz band the Max Output power is 0.241W. For 4G 850MHz band the Max Output power is 0.229W. For 4G 1900MHz band the Max Output power is 0.405W. The best case gain of the WiFi antenna is 3dBi. 3 dB logarithmic terms convert to numeric result is nearly 2. The best case gain of the 3G band antenna is 1dBi. 1 dB logarithmic terms convert to numeric result is nearly 1.26. The best case gain of the 4G band antenna is 2dBi. 2 dB logarithmic terms convert to numeric result is nearly 1.58. PG According to the formula S= , we can calculate S which is MPE. 4R 2 Note: dBm 1) P (Watts) =Power Input to antenna = 10 10 / 1000 2) G (Antenna gain in numeric) = 10^ (Antenna gain in dBi /10) 3) R = distance to the center of radiation of antenna (in meter) = 20cm 4) MPE limit = 1mW/cm² PG 35.73  2 WiFi: S= = =0.028 mW/cm2 2 4R  4  400  3.14 PG 1640  1.26 For 3G 850MHz band: S= = =0.411 mW/cm2 2 4R  4  400  3.14 PG 810  1.26 For 3G 1900MHz band: S= = =0.203 mW/cm2 2 4R  4  400  3.14 PG 241  1.58 For 4G 700MHz band: S= = =0.076 mW/cm2 4R 2 4  400  3.14 PG 229  1.58 For 4G 850MHz band: S= = =0.072 mW/cm2 2 4R  4  400  3.14 PG 405  1.58 For 4G 1900MHz band: S= = =0.127 mW/cm2 2 4R  4  400  3.14 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM171201235603 Page: 10 of 10 3G 850MHz band and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of 0.028 0.411 MPE is  =0.777<=1.0. 1 0.549 3G 1900MHz and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of MPE 0.028 0.203 is  =0.231<=1.0. 1 1 4G 700MHz band and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of 0.028 0.076 MPE is  =0.189<=1.0. 1 0.471 4G 850MHz band and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of 0.028 0.072 MPE is  =0.159<=1.0. 1 0.550 4G 1900MHz band and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of 0.028 0.127 MPE is  =0.155<=1.0. 1 1 So the device is exclusion from SAR test. --End of the Report-- This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


Document Created: 2018-02-26 15:58:03
Document Modified: 2018-02-26 15:58:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC