FCC Certificate Grant

FCC ID: 2ADTD-M55XXHN

Cover Letter(s)

Download: PDF
FCCID_3777802

TCB GRANT OF EQUIPMENT AUTHORIZATION TCB Certification Issued Under the Authority of the Federal Communications Commission By: TUV SUD BABT Forsyth House Churchfield Road Date of Grant: 05/30/2013 Walton-on-Thames, Surrey, KT12 2TD Application Dated: 05/30/2013 United Kingdom Huawei Technologies Co.,Ltd Bantian, Longgang District Shenzhen, China Attention: Zhang Xinghai , EMC Laboratory Manager NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: QISMU609 Name of Grantee: Huawei Technologies Co.,Ltd Equipment Class: PCS Licensed Transmitter Notes: Mobile Cellular module supporting GSM850, PCS1900, UMTS FDD II/V. Modular Type: Single Modular Frequency Output Frequency Emission Grant Notes FCC Rule Parts Range (MHZ) Watts Tolerance Designator 22H 824.2 - 848.8 1.64 24.5 Hz 247KGXW 22H 824.2 - 848.8 0.43 13.6 Hz 246KG7W 22H 826.4 - 846.6 0.22 10.3 Hz 4M14F9W 24E 1850.2 - 1909.8 0.81 27.8 Hz 245KGXW 24E 1850.2 - 1909.8 0.37 45.3 Hz 244KG7W 24E 1852.4 - 1907.6 0.21 28.9 Hz 4M15F9W Single Modular Approval. Output power is conducted. Class II permissive change filing for component changes as detailed in this filing. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 2.5dBi in the 850 MHz Cellular band and 2.5dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF



Document Created: 2018-03-13 08:16:29
Document Modified: 2018-03-13 08:16:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC