RF Exposure Info

FCC ID: 2ADTD-K1T607TMFW

RF Exposure Info

Download: PDF
FCCID_4256204

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 1 of 8 1 Cover Page RF Exposure Evaluation Report Application No.: SHEM1903011461CR FCC ID: 2ADTD-K1T607TMFW Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1. Hangzhou Hikvision Technology Co., Ltd. 2. Hangzhou Hikvision Electronics Co., Ltd. 3, Hangzhou Hikvision Digital Technology Co., Ltd. Address of Factory: 1. No.700, Dongliu Road, Binjiang District, Hangzhou City, Zhejiang, 310052, China 2. No.299, Qiushi Road, Tonglu Economic Development Zone, Tonglu County, Hangzhou, Zhejiang, 310052, China. 3, No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): EUT Name: Face Recognition Terminal Model No.: DS-K1T607TMFW, DS-K1T607MFW Add Model No.: Refer to Page 2 Standard(s) : FCC Rules 47 CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2019-03-12 Date of Test: 2019-03-15 to 2019-03-18 Date of Issue: 2019-04-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 2 of 8 Add Model No.: DS-K1T607TMW,DS-K1T607TMF,DS-K1T607TM,DS-K1T607PMFW,DS-K1T607PMW,DS- K1T607ATMFW,DS-K1T607ATMW,DS-K1T607ATMF,DS-K1T607ATM,DS-K1T607APMFW,DS- K1T607APMW,DS-K1T607TMUHK,DS-K1T607TMCKV,DS-K1T607TMUVS,DS-K1T607TMKVO,DS- K1T607TMHUN,DS-K1T607TMFUHK,DS-K1T607TMFCKV,DS-K1T607TMFUVS,DS-K1T607TMFKVO,DS- K1T607TMFHUN,DS-K1T607MW,DS-K1T607MF,DS-K1T607M,DS-K1T607AMFW,DS-K1T607AMW,DS- K1T607AMF,DS-K1T607AM,DS-K1T607MUHK,DS-K1T607MCKV,DS-K1T607MUVS,DS-K1T607MKVO,DS- K1T607MHUN,DS-K1T607MFUHK,DS-K1T607MFCKV,DS-K1T607MFUVS,DS-K1T607MFKVO,DS- K1T607MFHUN

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 3 of 8 Revision Record Version Description Date Remark 00 Original 2019-04-18 / Authorized for issue by: Vincent Zhu /Project Engineer Parlam Zhan /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 4 of 8 2 Contents Page 1 COVER PAGE................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 4 3 GENERAL INFORMATION ......................................................................................................................... 5 3.1 GENERAL DESCRIPTION OF E.U.T.................................................................................................................. 5 3.2 TEST LOCATION ............................................................................................................................................. 6 3.3 TEST FACILITY............................................................................................................................................... 6 4 TEST STANDARDS AND LIMITS .............................................................................................................. 7 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ................................................................................ 7 5 MEASUREMENT AND CALCULATION ................................................................................................... 7 5.1 MAXIMUM TRANSMIT POWER ........................................................................................................................ 7 5.2 MPE CALCULATION ...................................................................................................................................... 8

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 5 of 8 3 General Information 3.1 General Description of E.U.T. Power supply: DC 12V by AC Adapter Test voltage: AC 120V 60Hz 2.4GWiFi: Antenna Gain 3.05 dBi Antenna Type PCB Antenna Channel Spacing 5MHz Modulation Type 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels 802.11b/g/n(HT20):11 802.11n(HT40):7 Operation Frequency 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz 13.56MHz: Antenna Type Loop Antenna Modulation Type ASK Number of Channels 1 Operation Frequency 13.56MHz

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 6 of 8 3.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • NVLAP (Certificate No. 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program(NVLAP). Certificate No. 201034-0. • FCC –Designation Number: CN5033 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN5033. Test Firm Registration Number: 479755. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by ISED as an accredited testing laboratory. IC Registration No.: 8617A-1. CAB identifier: CN0020. • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-13868, C-14336, T-12221, G-10830 respectively.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 7 of 8 4 Test Standards and Limits 4.1 FCC Radiofrequency radiation exposure limits: According to§1.1310, the limit for general population/uncontrolled exposures Frequency Power density(mW/cm2) Averaging time(minutes) 1.34 MHz -30 MHz *180/f2 30 30 MHz -300 MHz 0.2 30 300MHz~1.5GHz f/1500 30 1.5GHz~100GHz 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density For 13.56MHz band, the limit of worse case is 0.98mW/cm2 For 2.4GHz band, the limit is 1.0 mW/cm2 5 Measurement and Calculation 5.1 Maximum transmit power The Power Data is based on the RF Test Report SHEM190301146101& SHEM190301146102 2.4GWiFi: 2Test Test Level Power Power Ant Mode Channel [dBm] [mW] [dBm] 11B 2412 Ant1 16.13 16.13 41.02 11B 2437 Ant1 16.72 16.72 46.99 11B 2462 Ant1 16.92 16.92 49.20 11G 2412 Ant1 14.87 14.87 30.69 11G 2437 Ant1 15.54 15.54 35.81 11G 2462 Ant1 15.72 15.72 37.33 11N20SISO 2412 Ant1 14.33 14.33 27.10 11N20SISO 2437 Ant1 14.98 14.98 31.48 11N20SISO 2462 Ant1 15.18 15.18 32.96 11N40SISO 2422 Ant1 12.95 12.95 19.72 11N40SISO 2437 Ant1 13.34 13.34 21.58 11N40SISO 2452 Ant1 13.51 13.51 22.44 13.56MHz: Frequency Output Power Output Power Model Level (dBuV/m) (MHz) (dBm) (mW) DS-K1T607TMFW 57.98 -37.32 0.00019 13.56 DS-K1T607MFW 61.25 -34.05 0.00039

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190301146103 Page: 8 of 8 5.2 MPE Calculation For FCC: PG According to the formula S= , we can calculate S which is MPE. 4R 2π Note: 1) P (Watts) 2) G (Antenna gain in numeric) 3) R = distance to the center of radiation of antenna (in meter) = 20cm 4) MPE limit = 1mW/cm² The max conducted output power is s 49.2 mW . The best case gain of the antenna is3.05 dBi. 3.05dB logarithmic terms convert to numeri c result is nearly 2.02 . PG So, S= = 0.02 mW/cm2 ＜1mW/cm² 4R 2 π For 13.56MHz: The Max E.I.R.P is 0.00039 mW. PG S= =0.00039/(4*400*3.14)=7.76*10-8mW/cm2 4R 2π 13.56MHz and WiFi modules can simultaneous transmitting, so the maximum rate of MPE is (0.02/1)+( 7.76*10-8/0.98)=0.02<=1.0. according to the KDB447498 section 7.2 determine the device is exclusion from SAR test. --End of the Report--


Document Created: 2019-04-28 14:07:03
Document Modified: 2019-04-28 14:07:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC