RF Exposure Report

FCC ID: 2ADQABD-122

RF Exposure Info

Download: PDF
FCCID_2484828

FCC ID : 2ADQABD-122 RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

FCC ID : 2ADQABD-122 Maximum measured transmitter power. BT Maximum Peak frequency Conducted Output Max Antenna Gain Tune up tolerance Power GHz dBm dBm dBi 2.402 1.650 2±1 0.5 2.441 1.874 2±1 0.5 2.480 2.402 2±1 0.5 Remark: The best case gain of the antenna is 0.5dBi. 0.5dBi logarithmic terms convert to numeric result is nearly 1.12 (2.402GHz) -3 dbm=1.9953mw (2.441GHz) -3 dbm=1.9953mw (2.480GHz) -3 dbm=1.9953mw BT: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 1.9953/5*√2.402=0.6185≤3.0 [(mid. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 1.9953/5*√2.441=0.6235≤3.0 [(min. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 1.9953/5*√2.480=0.6284≤3.0 Threshold at which no SAR required is 0.6284 ≤ 3.0 for 1-g SAR, Separation distance is 5mm. Conclusion: No SAR is required.


Document Created: 2014-12-19 12:53:00
Document Modified: 2014-12-19 12:53:00
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC