2ADOBHLTE315E_Label_location

FCC ID: 2ADOBHLTE315E

ID Label/Location Info

Download: PDF
FCCID_4258423

技术要求 编码：10797120 3、交付时附离型膜。 7、符合RoHS的相关要求。 6、印刷内容耐擦拭，持久不脱落。 HYT8.840.460 姜益民 20190218 于海燕 20190218 张文学 20190218 赵英芹 20190218 闫铭砚 20190218 8、根据设计提供样品，确认后方可量产 PROWER BUTTONS Procedure Step 1:Power off your phone before installing and removing the card tray. VOLUME BUTTONS Step 2:Use the ejection pin to remove the card tray. Step 3:Put the Nano-SIM or microSD card onto the card tray. Step 4:Push the card tray into the phone. PET 2、单位：mm；未注公差：±0.1，未注圆角R=0.2， 标识尺寸为重点管控尺寸。 Tips: 1.The phone supports only Nano-SIM and microSD cards.Non-nano or manually cut SIM cards can damage the phone. 1、材质：透明单层PET硅胶保护膜，型号：东莞鑫博仕6050D，t=65um，黏着力：0-3g。 2.To forcibly restart your phone,press and hold the power button. 3.Do not remove the back cover and battery.To have it replaced,contact 包装薄膜 a Hisense authorized service center. HLTE315E后壳静电吸附膜 Note:Follow all instructions carefully.Improper use will invalidate the 无偏斜、毛刺、错位等不良现象，符合《QRKAI G09001.M0401.10-2017 包材外观检验标准》。 warranty. 4、要求表面干净、平整、光滑、完好、无花斑、无皱折、无化油和化水现象。边缘要平整挺直； To protect your consumer rights,keep the above label safe. AI BUTTON CARD TRAY HYT8.840.460


Document Created: 2019-04-28 10:03:13
Document Modified: 2019-04-28 10:03:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC