12150954-S1V1 Appendix F

FCC ID: 2ADNG-NF230

RF Exposure Info

Download: PDF
FCCID_3780842

CERTIFICATE OF CALIBRATION I1SSUED BY UL VS LTD DATE OF 1ISSUE: 29/Nov/2017 CERTIFICATE NUMBER : 11903932JD001C 5248 UL VS LTD Page 1 of 10 PAVILION A ASHWOOD PARK, ASHWOOD WAY APPROVED SIGNATORY BASINGSTOKE, HAMPSHIRE RG23 8BG, UK M’ Y Ax.e— TEL: +44 (0) 1256 312000 FAX: +44 (0) 1256 312001 Naseer Mirza Email: LST.UK.Calibration@ul.com Customer : UL VS Inc 47173 Benicia Street Fremont, CA 94538, USA Equipment Details: Description: Dipole Validation Kit Date of Receipt: 20/Nov/2017 Manufacturer: Speag Type/Model Number: D900V2 Serial Number: 108 Calibration Date: 22/Nov/2017 Calibrated By: Chanthu Thevarajah Laboratory Engineer Signature: All Calibration have been conducted in the closed laboratory facility: Lab Temperature (22+3) °C and humidity < 70% This certificate is issued in accordance with the laboratory accreditation requirements of the United Kingdom Accreditation Service. It provides traceability of measurement to the S! system of units and/or to units of measurement realised at the National Physical Laboratory or other recognised national metrology institutes. This certificate may not be reproduced other than in full, except with the prior written approval of the issuing laboratory. Use of the UKAS mark demonstrates that compliance with the requirements of BS/EN/ISO/IEC 17025 has been independently assessed.

CERTIFICATE OF CALIBRATION CERTIFICATE NUMBER : ISSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 2 of 10 The calibration methods and procedures used were as detailed in: 1. IEC 62209—1:2005: Procedure to determine the specific absorption rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) 2. IEC 62209—2:2010: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) 3. IEEE 1528: 2013: IEEE Recommended Practice for Determining the Peak Spatial—Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Techniques FCC KDB Publication Number: "KDB865664 D01 SAR Measurement 100 MHz to 6 GHz" SPEAG DASY4/ DASY5 System Handbook The measuring equipment used to perform the calibration, documented in this certificate has been calibrated in accordance with the manufacturers‘ recommendations, and is traceable to recognized national standards. UL No. Instrument Manufacturer Type No. Serial No. Date Last Calibrated I%:cla.rval (Months) A2546 ol e Electronics SsPEAG DAE4 1435 10 Feb 2017 12 A2545 Probe SPEAG ES3DV4 3395 04 May 2017 12 A2588 Dipole SPEAG D900V2 104168 21 Sep 2017 12 PREO151451 Power Monitoring Kit Art—Fi ART 100850—01 0001 Cal as part of System 12 M1855 Power Sensor Rhode & Schwarz NRP—Z51 103246 08 Nov 2017 12 M1015 Network Analyser Agilent Technologies 8753ES US39172406 10 Oct 2017 12 PRE0151154 Network Analyser Rhode & Schwarz ZNDS8 100151 22 Nov 2016 24 PREO151877 Calibration Kit Rhode & Schwarz 2135 102947—Bt 02 Dec 2016 12 M1838 Signal Generator Rhode & Schwarz SMEOG 8313777005 30 Mars 2017 12

CERTIFICATE * OF CALIBRATION f ImMeccls NUMBER : ISSUED BY UL VS LTD 119039321D01C UKAS Accredited Calibration Laboratory No. 5248 Page 3 of 10 SAR System Specification Robot System Positioner: Staubli Unimation Corp. Robot Model: TX6OL Robot Serial Number: F14/5T5ZA1/A¥/O1 DASY Version: DASY 52 (v52.8.8.1258) Phantom: Flat section of SAM Twin Phantom Distance Dipole Centre: 15 mm (with spacer) Frequency: 900 MHz Dielectric Property Measurements — Head Simulating Liquid (HSL) & $X . Frequency Room Temp Liquid Temp Target Measured Uncertainty Simulant Liquid (MHz) Siat End Sn End Parameters value Vvalue (%) Head 900 21.0 °C 21.0 °C 20.5°C 21.0°C : 4(;"9570 4015.;3 i 222 SAR Results — Head Simulating Liquid (HSL) Simulant Liquid SAR Measured 250 mW input Power Normalised to 1.00 W U"c?;/ff)“”ty tead SAR averaged over 1g 2.69 W/Kq 10.70 WiKg *# 17.57% SAR averaged over 10g 1.73 W/Kg 6.88 W/KGg +17.32% Antenna Parameters — Head Simulating Liquid (HSL) Simulant Liquid Parameter Measured Level Unc?%?mty Head Impedance 50.666 O 4.46 jQ + 0.28 0 + 0.044 jQ Return Loss 27.83 + 2.03 dB

CERTIFICATE OF CALIBRATION CSuoke." NUMBER : |SSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 4 of 10 Dielectric Property Measurements — Body Simulating Liquid (MSL) k —*= Frequency Room Temp Liquid Temp Target Measured Uncertainty Simulant Liquid (MHz) Stan End Sn End Parameters vee Value (%) Body 900 ~ 21.0°C € 21.0°C s 21.0%C 4 |_21.0°C er > 55.00 T of 54.24 oz +5% > SAR Results — Body Simulating Liquid (MSL) Simulant Liquid SAR Measured 250 mW input Power Normalised to 1.00 W U”C‘(fl;i‘;imy Bod SAR averaged over 1g 2.73 W/Kg 10.86 W/Kg +18.06% 0y SAR averaged over 109 1.80 W/Kg 7.16 W/Kg £17.44% Antenna Parameters — Body Simulating Liquid (MSL) Simulant Liquid Parameter Measured Level Unc?;sinty f y Impedance 53.72 0 8.72]0 + 0.28 0 + 0.044 j0 0C¥ Return Loss 21.25 + 2.03 dB

CERTIFICATE OF CALIBRA — TION cermricate NUMBER : ISSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 5 of 10 DASY Validation Scan for Head Stimulating Liquid (HSL) DUT: Dipole 900 MHz; SN: 108; Type: D900V2; Serial: SN108 dB —2.21 —4.42 —6.64 —8.85 —~11.06 0 dB —3.15 W/kg =4.98 dBW/kg Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: 750,835,900,1800,1900 MHz HSL Medium parameters used: f = 900 MHz; 0 = 0.967 S/m; &; = 41.565; p = 1000 kg/m3 Phantom section: Flat Section DASY5 Configuration: — Probe: EX3DV4 — SN3995; ConvF(10.1, 10.1, 10.1); Calibrated: 04/05/2017; — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn1435; Calibrated: 10/02/2017 — Phantom: SAM (30deg probe tilt) with CRP v5.0; Type: QDOOOP4OCD; Serial: TP 300x — ; SEMCAD X Version 14.6.10 (7372) Configuration/d=15mm, Pin=250mW 2 2/A¥rea Scan (81x161x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 3.17 W/kg Configuration/d=15mm, Pin=250mW 2 2/Zoom Scan (§x5x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.39 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 4.11 Wikg SAR(1 g) = 2.69 W/ikg; SAR(10 g) = 1.73 Wikg Maximum value of SAR (measured) = 3.15 W/kg

CERTIFICATE OF CALIBRATION cesnipicats 1SSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 6 of 10 Impedance Measurement Plot for Head Stimulating Liquid (HSL) @ 11/28/2017 1:55:22 PM 1328.5170K$2—100151—MV Trci $11 Smith 200 mU/ Ref 1 U Cal Smo 1 ots ‘he M1 900.000000 MHz 50.666 O _in is ja.458 a e 788.363 pH ,u“fll .»‘/’ /.: s/l / //> I | \|t \ \ \ \ ."\ & ~ . Ch1 Start 700 MHz Pwr ~10 dBm Bw 10 kHz Stop 1.1 GHz

CERTIFICATE OF CALIBRATION cermiricate NUMBER : ISSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 7 of 10 Return Loss Measurement Plot for Head Stimulating Liquid (HSL) @ 11/28/2017 1:53:11 PM 1328.5170K82—100151—MV Trc1 S11 dB Mag 5 dB/ Ref—20 dB Cal Smo 1 M1 900.000000 MHz —27.8250 dB +M2 891.780000 MHz —20.0175 dB M3 926.480000 MHz —20.0334 dB —20 dB Ch1 Start 700 MHz Pwr ~10 dBm Bw 10 kHz Stop 1.1 GHz

CERTIFICATE OF CALIBRATION overx: ISSUED BY UL VS LTD 11903932JD01€ UKAS Accredited Calibration Laboratory No. 5248 Page 8 of 10 L___ DASY Validation Scan for Body Stimulating Liquid (MSL) DUT: Dipole 900 MHz; SN: 108; Type: D900V2; Serial: SN108 —1.98 —3.95 —5.93 —1.90 0 dB =2.94 W/kg =4.68 dBW/kg Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: MSL(750,835,900,1800,1900,5G) Medium parameters used: f = 900 MHz; 0 = 1.018 S/im; &; = 54.24; p = 1000 kg/m3 Phantom section: Flat Section DASYS Configuration: — Probe: EX3DV4 — SN3995; ConvF(9.81, 9.81, 9.81); Calibrated: 04/05/2017; — Sensor—Surface: 4mm (Mechanical Surface Detection) — Electronics: DAE4 $n1435; Calibrated: 10/02/2017 — Phantom: SAM (20deg probe tilt) with CRP v4.0; Type: QDO0OP40CC; Serial: TP:>xxx — ; SEMCAD X Version 14.6.10 (7372) SAR/d=15mm, Pin=250 mW, dist=10.0mm (ET—Probe)/Area Scan (81x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 3.21 W/kg SAR/d=15mm, Pin=250 mW, dist=10.0mm (ET—Probe)/Zoom Scan (5x5x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.69 V/m; Power Drift = —0.77 dB Peak SAR (extrapolated) = 4.04 Wi/kg SAR(1 g) = 2.73 W/ikg; SAR(10 g) = 1.8 W/ikg Maximum value of SAR (measured) = 2.94 W/kg

CERTIFICATE OF CALIBRATION certiricate ISSUED BY UL VS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 9 of 10 Impedance Measurement Plot for Body Stimulating Liquid (MSL) §MR Trc1 $11 Smith 200 mU/ Ref 1 U Cal Smo 1 savt s+= M1_ 900.000000 MHz 53.715 0 m _ j8.721 0 e _ 1.542 nH / “\ ,-'/l f/ ( M |_ \'. ‘l) \ \ A \\ \ *: \& !‘K N K Trag \‘\ 4 Ch1 Start 700 MHz Pwr ~10 dBm Bw 10 kHz Stop 1.1 GHz

CERTIFICATE OF CALIBRATION SSbent, ISSUED BY UL YS LTD 11903932JD01C UKAS Accredited Calibration Laboratory No. 5248 Page 10 of 10 Return Loss Measurement Plot for Body Stimulating Liquid (MSL) ® 11/28/2017 2:02:45 PM 1326.5170K82—100151—MV Trci S11 dB Mag 5 dB/ Ref—20 dB CalSmo 1 M1 200.000000 N\le —21.2486 dB M2 897.440000 MHz —19.9990 dB +M3 930.240000 MHz —20.0147 dB —20 dB 1 Ch1 Start 700 MHz Pwr —10 dBm Bw 10 kHz Stop 1.1 GHz

Calibration Certificate Label: UL VS LTD — Tel: +44 (0) 1256312000 Certificate Number: 11903932JD01C Instrument ID: 108 Calibration Date: 22/Nov/2017 Calibration Due Date: UL VS LTD — Tel: +44 (0) 1256312000 Certificate Number: 11903932JD01C Instrument ID: 108 Calibration Date: 22/Nov/2017 Calibration Due Date: UL VS LTD — Tel: +44 (0) 1256312000 Certificate Number: 11903932JD01C Instrument ID: 108 Calibration Date: 22/Nov/2017 Calibration Due Date:


Document Created: 2018-01-23 17:46:37
Document Modified: 2018-01-23 17:46:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC