User Manual

FCC ID: 2ADM5-SP-0700

Users Manual

Download: PDF
FCCID_4467386

27AUG19 Product Overview Charging your Wireless speaker As Safety instructions for the lithium battery and charging the product FCC STATEMENT Front Back 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the 1. Use the Micro USB cable provided with this wireless speaker <The input voltage to the product is DC 5V 1A. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then following two conditions: <In orderto charge the product in safe manner and reliable conditions, please only adopt AURA connect the USB plug to a USB port on a computer or wall adapter to begin charging (1) This device may not cause harmful interference. 3. The light will turn red while charging and will turn off once fully charged certified appropriate charger/ adapterfor charging the product. [ 1 [ (2) This device must accept any interference received, including interference that may —Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 cause undesired operation. NOTE: deg °C/104 deg °F. 2. Changes or modifications not expressly approved by the party responsible for \ ) * You must select a qualfied charger from a regular manufacturer. ~Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire. compliance could void the user‘s authority to operate the equipment. + You must charge the Wireless speaker if it has been not used for WIRELESS SPEAKER more than 12 months —Switch off the product after use. —Please note that we won‘t take any responsibiity for any wrong operation (eg. Voltage NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to Instruction Manual higher than 5V) as this may result in severe injury or loss of property, and we cannot On/Off switch Micro USB Charging port use Pog Micro USB Plug control the operating process during the time the user using this product. provide reasonable protection against harmful interference in a residential installation. Thank you for purchasing the AURA Wireless Speaker. <In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat This equipment generates uses and can radiate radio frequency energy and, if not This manual provides more information about this wireless speaker, Technical specification installed and used in accordance with the instructions, may cause harmful Package Contents generation, fire development or smoke development. please read the instructions before using. interference to radio communications. However, there is no quarantee: that AURA Wireless Speaker x 1po Driver Diameter: 52 mm interference will not occur in a particular installation. If this equipment does cause Micro USB Charging Cable x 1pc Impedance: 4 Ohms harmful interference to radio or television reception, which can be determined by Instruction Manual x 1pc Charging Time: 1.5 — 2 Hours turning the equipment off and on, the user is encouraged to try to correct the Playing Time: 1.5 — 2 Hours interference by one or more of the following measures: Power On/Off Rechargeable Li—lon Battery 3.7V 300m&h — Reorient or relocate the receiving antenna. Bluctooth Range: 32.8 feet Power on — Increase the separation between the equipment and receiver. Siide the ON/OFF switch to the *ON® position — Connect the equipment into an outlet on a circuit different from that to which the Power off receiver is connected. Siide the ON/OFF switch to the *OFF" position — Consultthe dealer or an experienced radio/TV technician for help. Pair Wireless speaker with your mobile device FAQ RF warning statement: The device has been evaluated to meet general RF exposure requirement. The 1. Keep the distance between your wireless speaker and mobile phone {or other devices) within 32.8 Feet device can be used in portable exposure condition without restriction. * If the Wireless speaker cannot be paired with your device, 2. Power on the wireless speaker. please try the following: 3. Activate the Bluetooth function on your phone within range and select Ensure that your speaker is in paiting mode or reconnection mode ‘BT Aura Speaker from the list shown Ensure that Bluetooth search function of your mobile deviceis activated 4. You will hear a beep sound when pairing is successful Reconnect Wireless speaker to your mobile device * If the Wireless speaker cannot be recharged: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. if you use a computer, ensure that it is connected and the 92234 03165 |0 When powered on, the wireless speaker will automatically connect with the last USB port is powered Distrbuted by 1616 Holdings, Inc. successfully paired device FCC ID: 2ADMS—SP—0700 701 Market Street, Suite 200 Philadelphia, PA 19106 Keap All Relevant for Future Made in China


Document Created: 2019-10-01 12:13:33
Document Modified: 2019-10-01 12:13:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC