FCC Part 1.1310 Test Report

FCC ID: 2ADLNXY4D1

RF Exposure Info

Download: PDF
FCCID_3629958

Test Report Prepared for: SMK USA Model: XY4D Description: This is a TAG that tracks valuables. These valuables can be items or people. It performs this by finding its location with BLE beacon. It transmites its position via BLE Serial Number: 8 FCC ID: 2ADLN-XY4D1 To FCC Part 1.1310 Date of Issue: October 18, 2017 On the behalf of the applicant: XY – The Findables Company 1133 Columbia St. Suite 205 San Diego, CA 92101 By the request of: SMK Manufacturing, Inc. 1055 Tierra Del Rey Suite H Chila Vista, CA 91910 Attention of: Leon Gateno, Sr RF Engineer Ph: (619)216-6425 Email: lgateno@smkusa.com Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p1790001 Kenneth Lee Project Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing All results contained herein relate only to the sample tested p1790001_FCC_Part 1.1310_Rev 1.0 Page 1 of 4

Test Report Revision History Revision Date Revised By Reason for Revision 1.0 September 26, 2017 Kenneth Lee Original Document p1790001_FCC_Part 1.1310_Rev 1.0 Page 2 of 4

ILAC / A2LA Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer joint ISO-ILAC-IAF Communiqué dated January 2009) The tests results contained within this test report all fall within our scope of accreditation, unless below Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. Testing Certificate Number: 2152.01 FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A EUT Description Model: XY4D Description: This is a TAG that tracks valuables. These valuables can be items or people. It performs this by finding its location with BLE beacon. It transmites its position via BLE Firmware: codeless_585 Software: N/A Serial Number: 8 Additional Information: None p1790001_FCC_Part 1.1310_Rev 1.0 Page 3 of 4

SAR Exclusion The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,25 where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation 26 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Max Power in mW = 3.95 mW Min. Test Separation Distance = 5 mm Frequency of Operation in GHz = 2.402 3.95 𝑚𝑊 X [√f(2.402)] = 1.224 5 𝑚𝑚 END OF TEST REPORT p1790001_FCC_Part 1.1310_Rev 1.0 Page 4 of 4


Document Created: 2019-09-14 20:16:51
Document Modified: 2019-09-14 20:16:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC