TunePro

FCC ID: 2ADLJZR1

Parts List/Tune Up Info

Download: PDF
FCCID_2457415

Tune up procedure Tune up procedure shall be over the power range or at specific operating power levels. 1. It must provide an operational voltage (3.4 ~ 4.2V DC) to turn on the device and on one certain channel in service mode by means of company proprietary software. 2. Base station simulator (CMU 200) measures the mobile phone device specific RF characteristics. 3. The maximum gains of each individual device are adjusted until the target value met. Tune‐up Power Mode Frequency Bands Tune‐up Power GSM850 31.0dBm±1dB GSM GSM1900 28.5dBm±1dB GPRS850(1 slots) 31.0dBm±1dB GPRS850(2 slots) 30.0dBm±1dB GPRS850(3 slots) 28.0dBm±1dB GPRS850(4 slots) 27.0dBm±1dB GPRS GPRS1900(1 slots) 28.5dBm±1dB GPRS1900(2 slots) 27.5dBm±1dB GPRS1900(3 slots) 25.5dBm±1dB GPRS1900(4 slots) 24.0dBm±1dB BT 2.4GHz 3.0dBm±1dB Then these appropriate gain settings are stored in each device individually. The user has no possibility to change these settings later on, and during manufacturing each device will be individual calibrated. The measurement is done in fully calibrated setup, which is based on a CMU 200 base station simulator. Furthermore, the highest power level is verified afterwards in a call measurement on three channels (low, middle and high).


Document Created: 2014-11-22 16:57:01
Document Modified: 2014-11-22 16:57:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC