15_XO-9549 UserMan

FCC ID: 2ADK3XO-9549

Users Manual

Download: PDF
FCCID_4373167

SIZE:89*165mm Bora Wooden Wireless INSTRUCTIONS: 5. Do not expose the device to moisture. 6. Do not use the device in excess of its However, there is no guarantee that interference will not occur in a particular installation. If this Charging Pad 1. a. Connect the provided Micro-USB cable to output rating. Overload outputs above the equipment does cause harmful interference to Instruction Manual the USB plug adapter. radio or television reception, which can be b. Connect the Micro-USB tip to the input port 7. Do not use the device if damaged or determined by turning the equipment off and on, XO-9549 on the charging pad. the user is encouraged to try to correct the FCC ID:2ADK3XO-9549 8. interference by one or more of the following c. Insert corresponding charging cable into the Charging Pad USB port. measures: 2. Charging Mobile Devices: explosion or risk of injury. 9. Do not disassemble the device. For repairs, - Reorient or relocate the receiving antenna. a. Ensure that your phone or tablet supports - Increase the separation between the equipment wireless charging. It will be listed in the Incorrect reassembly may result in a risk of and receiver. - Connect the equipment into an outlet on a circuit the last page of this manual). 10. different from that to which the receiver is b. Place the enabled device on the surface connected. of the wireless charging pad. The device - Consult the dealer or an experienced radio/TV should display charging indicator. or temperatures above 104°F (40°C) may result in explosion. technician for help c. When completely charged, remove the device from the charging pad. 11. To ensure product safety, ensure that Changes or modifications not expressly approved * Note: To charge devices, use only the by the party responsible for compliance accessory cable or the cable included with identical replacement parts. could void the user's authority to operate the your own device by the manufacturer. 12. Attachments on the back of your phone can equipment. Function: impede the effectiveness of the wireless SAFETY PRECAUTIONS: This device complies with Part 1. Micro-USB Input Port Read all the instructions before using the charger, and lead to overheating. Please 15 of the FCC Rules. Operation is subject to the 2. LED Indicator product. remove attachments from the phone before following two conditions: 3. Charging Pad Surface charging on this device. (1) this device may not cause harmful • WARNING-When using this product, basic interference, and What’s included: precautions should always be followed: *** KEEP OUT OF REACH OF CHILDREN*** (2) this device must accept any interference 1. Read all the instructions before use. 1 x Wireless Charging Pad 2. Never store or use this product in FCC Statement: received, including interference that may cause 1 x USB to Micro-USB Charging Cable NOTE: This equipment has been tested and undesired operation. temperatures below 32°F (0°C) or above 1 x Instruction Manual found to comply with the limits for a Class B 115°F (45°C). 3. Do not overcharge your phone. The digital device, pursuant to part 15 of the FCC RF Exposure Warning Statements: unit may become hot under excessive Rules. These limits are designed to provide This equipment complies with FCC radiation • Input power: 5V/1A use. Remove your phone once it is fully reasonable protection against harmful exposure limits set forth for an uncontrolled • Output power: 5V/750mA charged. Never charge your phone for interference in a residential installation. This environment.This equipment shall be installed LED Indications more than 7 hours at a time. equipment generates uses and can radiate radio and operated with minimum distance 20cm 4. To reduce the risk of injury, close frequency energy and, if not installed and used in between the radiator & body. • While device is charging LED will illuminate supervision is required when the product is accordance with the instructions, may cause RED. used near children. harmful interference to radio communications. Made in China


Document Created: 2019-06-27 16:26:31
Document Modified: 2019-06-27 16:26:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC