User Manual Revised

FCC ID: 2ADI8-SL032

Users Manual

Download: PDF
FCCID_4298595

RFID MODULE Mifare Reader / Writer SL032 User Manual Version 3.1 July 03, 2017 StrongLink

StrongLink SL032 V3.1 CONTENT 1. MAIN FEATURES ................................................................................. 3 2. PINNING INFORMATION .................................................................. 4 3. BAUD RATE SETTING .......................................................................... 5 4. COMMUNICATION PROTOCOL........................................................ 5 4-1. COMMUNICATION SETTING .................................................................... 5 4-2. COMMUNICATION FORMAT .................................................................... 5 4-3. COMMAND OVERVIEW ............................................................................ 6 4-4. COMMAND LIST ....................................................................................... 8 4-4-1. Select Mifare card .............................................................................. 8 4-4-2. Login to a sector ................................................................................. 8 4-4-3. Read a data block ............................................................................... 9 4-4-4. Write a data block .............................................................................. 9 4-4-5. Read a value block ............................................................................. 9 4-4-6. Initialize a value block ....................................................................... 9 4-4-7. Write master key (key A) ................................................................ 10 4-4-8. Increment value ................................................................................ 10 4-4-9. Decrement value ............................................................................... 10 4-4-10. Copy value....................................................................................... 11 4-4-11. Read a data page (Ultralight & NTAG203) ................................. 11 4-4-12. Write a data Page (Ultralight & NTAG203) ............................... 11 4-4-13. Download Key................................................................................. 12 4-4-15. Request for Answer to Select (ISO14443-4) ................................ 12 4-4-16. Exchange Transparent Data (T = CL) ......................................... 12 4-4-17. LED Control ................................................................................... 13 4-4-18. Power Down .................................................................................... 14 4-4-19. 3Des Authentication(Utralight C)................................................. 14 4-4-20. Update Key(Utralight C) ............................................................... 14 4-4-21. Write Perso ..................................................................................... 14 4-4-22. Commit Perso ................................................................................. 15 4-4-23. Get firmware version ..................................................................... 15 4-4-24. Turn on/off Auto-detection ........................................................... 15 5. DIFFERENCES FROM PREVIOUS VERSION ................................ 16 http://www.stronglink-rfid.com 2

StrongLink SL032 V3.1 1. MAIN FEATURES *This picture may not be exactly the same as real object. • Tags supported: Mifare 1k, Mifare 4k, Mifare UltraLight, Mifare UltraLight C, NTAG203, DESFire, DESFire EV1 and Mifare Plus 2K/4K • Built-in antenna • UART interface, baud rate 9,600 ~ 115,200 bps • 2.7 ~ 3.6V VDC operating, I/O pins are 5V tolerant • Work current less than 45mA @3.3V • Power down current less than 10uA • Operating distance: Up to 50mm, depending on tag • Storage temperature: -40 ºC ~ +85 ºC • Operating temperature: -25 ºC ~ +55 ºC • Dimension: 46 × 46 × 3 mm • The OUT pin at low level indicates tag in detective range, and high level indicating tag out • Auto-detection: LED is on when card is in the detection range 1 1 Suppots all cards above except ISO14443-4 cards like DESFire/DESFire EV1 and MifarePlus L0/L2/L3. There is http://www.stronglink-rfid.com 3

StrongLink SL032 V3.1 2. PINNING INFORMATION PIN SYMBOL TYPE DESCRIPTION 1 VDD PWR Power supply, 2.7 to 3.6VDC 2 IN Input Falling edge wake up SL032 from power down mode 3 TXD Output Serial output port 4 RXD Input Serial input port Tag auto-detection signal 5 OUT Output low level indicating tag in high level indicating tag out 6 GND PWR Ground 7 NC 8 NC 9 NC 10 NC Attention: Pin IN must be connected HIGH voltage when working, so SL032 can enter power down mode properly. Auto-detection command to control its on/off. http://www.stronglink-rfid.com 4

StrongLink SL032 V3.1 3. BAUD RATE SETTING R6 & R7 are used for setting baud rate as follows sheet R6 R7 Baud rate bps no no 9,600 yes no 19,200 Assembled no yes 57,600 115,200 yes yes ( default ) 4. COMMUNICATION PROTOCOL 4-1. Communication Setting The communication protocol is byte oriented. Both sending and receiving bytes are in hexadecimal format. The communication parameters are as follows, Baud rate: 9,600 ~ 115,200 bps Data: 8 bits Stop: 1 bit Parity: None Flow control: None 4-2. Communication Format Host to Reader: Preamble Len Command Data Checksum Preamble: 1 byte equal to 0xBA Len: 1 byte, indicating the number of bytes from Command to Checksum Command: 1 byte Command code, see Table 3 Data: Variable length depends on the command type Checksum: 1 byte XOR of all the bytes from Preamble to Data Reader to Host: Preamble Len Command Status Data Checksum Preamble: 1 byte equal to 0xBD Len: 1 byte indicating the number of bytes from Command to Checksum Command: 1 byte Command code, see Table 3 Status: 1 byte Command status, see Table 4 Data: Variable length depends on the command type. Checksum: 1 byte XOR of all the bytes from Preamble to Data http://www.stronglink-rfid.com 5

StrongLink SL032 V3.1 4-3. Command Overview Table 3 Command Description 0x01 Select Mifare card 0x02 Login to a sector 0x03 Read a data block 0x04 Write a data block 0x05 Read a value block 0x06 Initialize a value block 0x07 Write master key (key A) 0x08 Increment value 0x09 Decrement value 0x0A Copy value 0x10 Read a data page (Ultralight & NTAG203) 0x11 Write a data page (Ultralight & NATG203) 0x12 Download Key 0x13 Login sector via stored Key 0x20 Request for Answer to Select (ISO14443-4) 0x21 Exchange Transparent Data according to T = CL 0x40 LED control 0x50 Go to Power Down mode 0x60 3Des Authentication(Ultralight C) 0x61 Update Key(Ultralight C) 0x80 MFP WritePerso 0x81 MFP CommitPerso 0xF0 Get firmware version 0xFE Turn on/off Auto-detection Status Overview Table 4 Status Description 0x00 Operation succeed 0x01 No tag 0x02 Login succeed 0x03 Login fail 0x04 Read fail 0x05 Write fail 0x06 Unable to read after write 0x08 Address overflow 0x09 Download Key fail 0x0A Collision occur 0x0C Load key fail 0x0D Not authenticate 0x0E Not a value block 0x0F Input len invalid http://www.stronglink-rfid.com 6

StrongLink SL032 V3.1 0x12 MFP WritePerso fail 0x13 MFP CommitPerso fail 0x14 Ulralight c authenticate fail http://www.stronglink-rfid.com 7

StrongLink SL032 V3.1 4-4. Command List 4-4-1. Select Mifare card 0xBA Len 0x01 Checksum Response: 0xBD Len 0x01 Status UID Type Checksum Status: 0x00: Operation succeed 0x01: No tag 0x0A: Collision occur 0xF0: Checksum error UID: The uniquely serial number of Mifare carde Type: MFMini_4B 0x01 MFMini_7B 0x02 MF1K_4B UID/ MFPLUS2K SL1_4B UID 0x03 MF1K_7B UID/ MFPLUS2K SL1_7B UID 0x04 MF4K_4B UID/ MFPLUS4K SL1_4B UID 0x05 MF4K_7B UID/ MFPLUS4K SL1_7B UID 0x06 MF Ultralight/MF Ultralight C/Ntag 203 0x07 MF DESFire/MF DESFire EV1 0x09 MF PROX 0x0B MFPLUS2K SL2_4B UID 0x21 MFPLUS4K SL2_4B UID 0x22 MFPLUS2K SL2_7B UID 0x23 MFPLUS4K SL2_7B UID 0x24 MFPLUS2K SL0/SL3_4B UID 2 0x31 MFPLUS4K SL0/SL3_4B UID 0x32 MFPLUS2K SL0/SL3_7B UID 0x33 MFPLUS4K SL0/SL3_7B UID 0x34 Other 0x00 4-4-2. Login to a sector 0xBA Len 0x02 Sector Type Key Checksum Sector: Sector need to login Type: Key type (0xAA: authenticate with KeyA, 0xBB: authenticate with KeyB) Key: Authenticate key, 6 bytes Response: 0xBD Len 0x02 Status Checksum Status: 0x02: Login succeed 0x03: Login fail 0xF0: Checksum error 2 Mifare Plus SL0 and SL3 can tell differences via ATS(ISO14443-4). Before ATS, they have the same ATQA and SAK(ISO14443-3). SL032 judges card type only via ISO14443-3 layer for the compatibility. http://www.stronglink-rfid.com 8

StrongLink SL032 V3.1 4-4-3. Read a data block 0xBA Len 0x03 Block Checksum Block: The block number to be read, 1 byte Response: 0xBD Len 0x03 Status Data Checksum Status: 0x00: Operation succeed 0x04: Read fail 0x0D: Not authenticate 0xF0: Checksum error Data: Block data returned if operation succeeds, 16 bytes. 4-4-4. Write a data block 0xBA Len 0x04 Block Data Checksum Block: The block number to be written, 1 byte. Data: The data to write, 16 bytes. Response: 0xBD Len 0x04 Status Data Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x06: Unable to read after write 0x0D: Not authenticate 0xF0: Checksum error Data: Block data written if operation succeeds, 16 bytes. 4-4-5. Read a value block 0xBA Len 0x05 Block Checksum Block: The block number to be read, 1 byte. Response: 0xBD Len 0x05 Status Value Checksum Status: 0x00: Operation succeed 0x04: Read fail 0x0D: Not authenticate 0x0E: Not a value block 0xF0: Checksum error Value: Value returned if the operation succeeds, 4 bytes. 4-4-6. Initialize a value block 0xBA Len 0x06 Block Value Checksum Block: The block number to be initialized, 1 byte. Value: The value to be written, 4 bytes. Response: 0xBD Len 0x06 Status Value Checksum Status: 0x00: Operation succeed http://www.stronglink-rfid.com 9

StrongLink SL032 V3.1 0x05: Write fail 0x06: Unable to read after write 0x0D: Not authenticate 0xF0: Checksum error Value: Value written if the operation succeeds, 4 bytes. 4-4-7. Write master key (key A) 0xBA Len 0x07 Sector Key Checksum Sector: The sector number to be written, 1 byte. Key: Authentication key, 6 bytes Response: 0xBD Len 0x07 Status Key Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x0D: Not authenticate 0xF0: Checksum error Key: Authentication key written if the operation succeeds, 6 bytes. 4-4-8. Increment value 0xBA Len 0x08 Block Value Checksum Block: The block number to be increased, 1 byte. Value: The value to be increased by, 4 bytes. Response: 0xBD Len 0x08 Status Value Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x06: Unable to read after write 0x0D: Not authenticate 0x0E: Not a value block 0xF0: Checksum error Value: The value after increment if the operation succeeds, 4 bytes 4-4-9. Decrement value 0xBA Len 0x09 Block Value Checksum Block: The block number to be decreased, 1 byte Value: The value to be decreased by, 4 bytes Response: 0xBD Len 0x09 Status Value Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x06: Unable to read after write 0x0D: Not authenticate 0x0E: Not a value block http://www.stronglink-rfid.com 10

StrongLink SL032 V3.1 0xF0: Checksum error Value: The value after decrement if the operation succeeds, 4 bytes 4-4-10. Copy value 0xBA Len 0x0A Source Destination Checksum Source: The source block copy from, 1 byte Destination: The destination copy to, 1 byte The source and destination must in the same sector Response: 0xBD Len 0x0A Status Value Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x06: Unable to read after write 0x0D: Not authenticate 0x0E: Not a value block (Source) 0xF0: Checksum error Value: The value after copy if the operation succeeds, 4 bytes 4-4-11. Read a data page (Ultralight & NTAG203) 0xBA Len 0x10 Page Checksum Page: The page number to be read, 1 byte Response: 0xBD Len 0x10 Status Data Checksum Status: 0x00: Operation succeed 0x04: Read fail 0xF0: Checksum error Data: Block data returned if operation succeeds, 4 bytes. 4-4-12. Write a data Page (Ultralight & NTAG203) 0xBA Len 0x11 Page Data Checksum Page: The page number to be written, 1 byte. Data: The data to write, 4 bytes. Response: 0xBD Len 0x11 Status Data Checksum Status: 0x00: Operation succeed 0x05: Write fail 0x06: Unable to read after write 0xF0: Checksum error Data: page data written if operation succeeds, 4 bytes. http://www.stronglink-rfid.com 11

StrongLink SL032 V3.1 4-4-13. Download Key 0xBA Len 0x12 Sector Type Key Checksum Sector: 0 - 39 Type: Key type (0xAA: KeyA, 0xBB: KeyB) Key: 6 bytes, stored in SL032 Response: 0xBD Len 0x12 Status Checksum Status: 0x00: Operation succeed 0x08: Address overflow 0xF0: Checksum error 4-4-14. Login sector via stored key 0xBA Len 0x13 Sector Type Checksum Sector: 0 - 39 Type: Key type (0xAA: KeyA, 0xBB: KeyB) Response: 0xBD Len 0x13 Status Checksum Status: 0x02: Login succeed 0x03: Login fail 0x08: Address overflow 0xF0: Checksum error 4-4-15. Request for Answer to Select (ISO14443-4) 0xBA Len 0x20 Checksum Response: 0xBD Len 0x20 Status ATS Checksum Status: 0x00: Operation succeed 0x10: Address overflow 0xF0: Checksum error ATS: According to ISO14443-4 protocol Len + T0 + TA1 + TB1 + TC1 + A1 + AK 4-4-16. Exchange Transparent Data (T = CL) 0xBA Len 0x21 Data Checksum Data: COS command Response: 0xBD Len 0x21 Status Data Checksum Status: 0x00: Operation succeed 0x11: Communicate with card failed 0xF0: Checksum error Data: Response data from card http://www.stronglink-rfid.com 12

StrongLink SL032 V3.1 4-4-17. LED Control 0xBA Len 0x40 Data Checksum Data: 0x00: LED off 0x01: LED on Return: 0xBD Len 0x40 Status Checksum Status: 0x00: Operation succeed 0xF0: Checksum error http://www.stronglink-rfid.com 13

StrongLink SL032 V3.1 4-4-18. Power Down 0xBA Len 0x50 Checksum Response: 0xBD Len 0x50 Status Checksum Status: 0x00: Operation succeed 0xF0: Checksum error 4-4-19. 3Des Authentication(Utralight C) 0xBA Len 0x60 Key Checksum Key: 16 bytes Response: 0xBD Len 0x60 Status Checksum Status: 0x00: Operation succeed 0x14: Authenticate failed 0xF0: Checksum error 4-4-20. Update Key(Utralight C) 0xBA Len 0x61 Key Checksum Key: 16 bytes Response: 0xBD Len 0x61 Status Checksum Status: 0x00: Operation succeed 0x05: Write fail 0xF0: Checksum error 4-4-21. Write Perso 0xBA Len 0x80 Bnr Data Checksum Bnr: 2Byte Block or Key Address to be written, MSB first. For example, Master Key Address is 0x9000, and write it as 0xFFFF..FF(16Bytes) BA14809000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBEh Configuration Key Address is 0x9001, and write it as 0xFFFF..FF(16Bytes) BA14809001FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFh Switch to Level 2 Key Address is 0x9002, and write it as 0xFFFF..FF(16Bytes) BA14809002FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBCh Switch to Level 3 Key Address is 0x9003, and write it as 0xFFFF..FF(16Bytes) BA14809003FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBDh Data: Value of the key or data Response: 0xBD Len 0x80 Status Checksum Status: 0x00: Operation succeed 0x11: Communicate with card failed 0x12: Card Write Perso failed http://www.stronglink-rfid.com 14

StrongLink SL032 V3.1 0xF0: Checksum error 4-4-22. Commit Perso 0xBA Len 0x81 Checksum This command commit the Write Perso and switch the card to security level 1(SL1 card) or level 3(SL3 card). Response: 0xBD Len 0x81 Status Checksum Status: 0x00: Operation succeed 0x11: Communicate with card failed 0x13: Card Commit Perso failed 0xF0: Checksum error Attention: According to NXP MifarePlus card document, Commit Perso will make effect after you have “Write Perso” the Master KEY, Configuration KEY and SWL3 KEY. If your card is L1 card, after Commit Perso, the card will switch L0 to L1; If your card is L3 card, after Commit Perso, the card will switch L0 to L3. 4-4-23. Get firmware version 0xBA Len 0xF0 Checksum Response: 0xBD Len 0xF0 Status Data Checksum Status: 0x00: Operation success 0xF0: Checksum error Data: firmware version. 4-4-24. Turn on/off Auto-detection 0xBA Len 0xFE Data Checksum Data: 0x00: Turn off Auto-detection 0x01: Turn on Auto-detection For example, 02FE00h // Turn off Auto-detection 02FE01h // Turn on Auto-detection Response: 0xBD Len 0xFE Status Checksum Status: 0x00: Operation succeed http://www.stronglink-rfid.com 15

StrongLink SL032 V3.1 5. DIFFERENCES FROM PREVIOUS VERSION Although we make efforts on the compatibility between the new SL032 V3.1and the old SL032, there are still some differences you need to know. 1. New SL032 has the auto-detection function which can close automatically when there is a DESFire or MifarePlus L0/L2/L3 card coming into the detection range. By the way, we also offer you the Turn On/Off Auto-detection command. 2. New SL032 supports nearly all cards of NXP Mifare series now and we rebuilt the card type characters.(Details see to Command Select Mifare Card Description) 3. New SL032 also has PIN OUT function indicating tag auto-detection status like SL025 and SL031 now. 4. New SL032 has the 3des authentication and update key function for ulralight c. http://www.stronglink-rfid.com 16

Product Information Product Name: MIFARE MODULE Model No.: SL032_V3.1 RFID: 13.56MHz Antenna Type: Integrated Antenna Host Information Product Name: Host device Model No.: T032 Manufacturer: BEIJING STRONGLINK TECHNOLOGY CO,. LTD. The regulated power supply of the host is as below: T032 is a host device of SL032_V3.1 for command sets testing. Its power supply is obtained by 12V AC-DC adapter, and converting 12V to 5V through DC to DC LM2575 and 5V to 3.3V through LDO AMS1117, to power stable 3.3V to MCU and the SL032_V3.1 module.

Federal Communications Commission (FCC) Interference Statement The limited modular transmitter is only FCC authorized for the specific rule part (FCC Part15.225) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. For additional hosts other than the specific host originally granted with a limited module, a Class II permissive change is required on the module grant to register the additional host as a specific host also approved with the module. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product may not be collocated or operated in conjunction with any other antenna or transmitter. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Additional text needed for the host product manufacturer to provide to end users in their end-product manuals.

OEM Integration Instructions： This device is intended only for OEM integrators under the following conditions: The module can be used to installation in other host. The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed (for example, digital device emission, PC peripheral requirements, etc.) IMPORTANT NOTE： In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstance, the OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization. The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: 2ADI8-SL032 or Contains FCC ID: 2ADI8-SL032”.


Document Created: 2019-05-15 10:13:57
Document Modified: 2019-05-15 10:13:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC