2ADI8-SL025B_FCC-Modular-Approval-Letter

FCC ID: 2ADI8-SL025B

Cover Letter(s)

Download: PDF
FCCID_4266132

MODULAR APPROVAL LETTER Modular Approval Requirement EUT Condition Ccomply (i) The radio elements of the modular This modular do have no its No transmitter must have their own shielding. The own RF shielding. physical crystal and tuning capacitors may be located external to the shielded radio elements. {ii) The modular transmitter must have buffered The EUT has buffered data Yes modulation/data inputs (if such inputs are inputs, it is integrated in U2 provided) to ensure that the module will comply chip{MFRC522) with part 15 requirements under conditions of excessive data rates or over—modulation. _ {iil) The modular transmitter must have its own The modular has its own power Yes power supply regulation. supply regulation (V1i— AMS1117—3.3) {iv) The modular transmitter must comply with The modular transmitter Yes the antenna and transmission system complies with the antenna requirements of §§ 15.203, 15.204(b) and requirements. 15.204(c). The antenna must either be permanently attached or employ a "unique" antenna coupler (at all connections between the module and the antenna, including the cable). The "professional installation" provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. (v) The modular transmitter must be tested in a The modular transmitter is Yes stand—alone configuration tested in a stand—alone configuration. {vi) The modular transmitter must be equipped The modular transmitter has Yes with either a permanently affixed label or must permanents fixed tag. be capable of electronically displaying its FCC identification number. _ _ . {vii) The modular transmitter must comply with Please refer to the user manual Yes any specific rules or operating requirements instructions. that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. {vili) The modular transmitter must comply with The modular transmitter Yes any applicable RF exposure requirements in its complies with applicable RF final configuration. exposure requirements. Signature: Bo Chang BEWJING STRONGLINK TECI—%LOGY CQ,. LTD. t C:\Documents and Setti gs\finistr nWAAINECC_: 7t Soff\sLo25B_v3.0\2a0i8—sto25e_rcc Madular Approval Letter.docx


Document Created: 2019-04-18 14:15:41
Document Modified: 2019-04-18 14:15:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC