FCC Modular Approval Request Rev2

FCC ID: 2ADDWTB1206

Cover Letter(s)

Download: PDF
FCCID_4280548

Shenzhen Topband Co., LTD Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Shenzhen Topband Co., LTD. FCC ID: 2ADDWTB1206 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide v02’. FCC ID 2ADDWTB1206 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee ‘Modular Certification Guide v01r04 (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry All the components are contained in the shielded. Physical components and tuning capacitor(s) may be shield. located external to the shield, but must be on the module assembly The module must have buffered modulation/data inputs to ensure The module have buffered modulation/data that the device will comply with Part 15 requirements with any inputs. type of input signal ESP8266EX chip contains internal power The module must contain power supply regulation on the module management module The module must contain a permanently attached antenna, or The product have a PCB antenna, and it contain a unique antenna connector, and be marketed and is not replaceable. operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) complies The module must demonstrate compliance in a stand-alone configuration The module must be labelled with its permanently affixed FCC ID The module labelled with its permanently label, or use an electronic display (See KDB Publication 784748 affixed FCC ID label about labelling requirements) The module must comply with all specific rules applicable to the complies transmitter including all the conditions provided in the integration instructions by the grantee Complies, Refer to the MPE report. The module must comply with RF exposure requirements Name: Ou Liang Date: 2019-04-25 Title: Certification Engineer Signature of applicant FCC – Modular Approval Request Rev 2.0


Document Created: 2019-05-15 14:54:35
Document Modified: 2019-05-15 14:54:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC