Test Report

FCC ID: 2AD9XVERSAH

Test Report

Download: PDF
FCCID_2544070

19473 Fraser Way Pitt Meadows, BC Canada V3Y 2V4 ph. 604-527-8378 |fx. 604 527 8388 Electromagnetic Compatibility Test Report FCC CFR47 Part 15 Subpart B, Subpart C 15.231 15.205; RSS Gen issue 4, ICES-003 Issue 5 & RSS 210 issue 8, Annex 1 Report Reference No. .....................: E10676-1402-H Rev 2.0 Date of issue ........................................: February-25-2015 Total number of pages......... ........: 19 Testing Laboratory…………………... : Quality Auditing Institute Address………………………………………...: 16 – 211 Schoolhouse Street, Coquitlam, BC, V3K 4X9, Canada Accreditations (ISO 17025): Standard Council of Canada: Accredited Laboratory No. 743 International Accreditation Service Inc: Accredited Laboratory: No. TL-239 This report has been completed in accordance with the requirements of ISO/IEC 17025. Test results contained in this report are within QAI Laboratories ISO/IEC 17025 accreditation. QAI Laboratories authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for the use by the company’s employees only. Applicant’s name ..............................: Versa Wireless Address……………………....……....: 3725 159A Street, Surrey, BC Canada, V3Z 0P1 Contact………………………....……..: Justin Carlson, Email ...............: justin@versawireless.com Phone………………………......……..: (604) 807-3235 Test Standard…............................. : FCC CFR47 Part 15 Subpart B, Subpart C 15.231 15.205; RSS Gen issue 4, ICES-003 Issue 5 & RSS 210 issue 8, Annex 1 Test item description....................... : Single Protocol Security Sensors: Versa H Manufacturer ...................................: Versa Wireless Model Number ................ .............: Versa H FCC ID ................................. ........: 2AD9XVERSAH IC Certification No. ........................: 12637A-VersaH

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 2 of 19 Security Sensors: Versa H (EUT)

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 3 of 19 Revision History Date Report Number Rev # Details Authors Initials Jan-28-2015 E10676-1402-2GIG 0.0 Draft Test Report JQ Jan-28-2015 E10676-1402-H 0.1 Draft Test Report JQ Feb-05-2015 E10676-1402-H 1.0 Final Test Report JQ Feb-25-2015 E10676-1402-H 2.0 Final Test Report JQ All previous versions of this Report have been superseded by the latest dated Revision as listed in the above table. Please dispose of all previous electronic and paper printed revisions accordingly.

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 4 of 19 Index EMC TEST SUMMARY....................................................................................................... 5 PRODUCT DESCRIPTION ................................................................................................. 6 EUT DESCRIPTION ........................................................................................................... 6 FACILITIES AND ACCREDITATION .................................................................................. 7 ENVIROMENTAL CONDITIONS: ....................................................................................... 7 TESTING METHODOLOGY ............................................................................................... 7 EUT TESTING CONFIGURATION ..................................................................................... 7 GENERAL TEST PROCEDURES ...................................................................................... 7 MEASUREMENT UNCERTAINTY ..................................................................................... 8 TEST EQUIPMENT LIST .................................................................................................... 8 Part 1 - Radiated Emissions Testing (Unintentional Mode) ................................................ 9 Part 2 - Transmitter Radiated Emissions Testing ............................................................. 10 Part 3 - Duty CycleTesting ................................................................................................ 14 Part 4 - 20 dB Bandwidth Testing ..................................................................................... 16 Part 5 - Transmitter Time Testing ..................................................................................... 17 Test Setup Pictures ........................................................................................................... 18

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 5 of 19 EMC TEST SUMMARY The following tests demonstrate the testimony to “FCC & IC” Mark Electromagnetic compatibility testing for “Versa H” manufactured by Versa Wireless. The testing was performed pursuant to FCC CFR47 Part 15 Subpart B, Subpart C 15.231 15.205; RSS Gen issue 4, ICES-003 Issue 5 & RSS 210 issue 8, Annex 1 Performance Test Item Applicable Standard Description Criteria Radiated FCC CFR47 Part 15 Subpart B; The emission are measured when Part 1 Complies Emissions RSS Gen issue 4, ICES-003 Issue 5 the transmitter is not actived Transmitter FCC CFR47 Part 15 Subpart C Field strength of fundamental and Part 2 Radiated 15.231 15.205; RSS Gen issue 4 & spurious emission are measured in Complies Emission RSS 210 issue 8, Annex 1 the 30MHz-3.3Hz range Part 3 Duty Cycle FCC Part 15.35 Duty cycle correction factor Complies FCC CFR47 Part 15 Subpart C The bandwidth of the emission shall 20 dB Part 4 15.231; RSS Gen issue 4 & RSS be no wider than 0.25% of the Complies Bandwidth 210 issue 8, Annex 1 center frequency FCC CFR47 Part 15 Subpart C Transmitter transmitter shall cease transmission Part 5 15.231; RSS Gen issue 4 & RSS Complies Timing within 5 seconds after activation 210 issue 8, Annex 1 Tests were conducted on a sample of the equipment as requested by Versa Wireless for the purpose of demonstrating compliance with FCC CFR47 Part 15 Subpart B, Subpart C 15.231 15.205; RSS Gen issue 4, ICES-003 Issue 5 & RSS 210 issue 8, Annex 1. Versa Wireless is responsible for the tested product configuration, continued product compliance with these standards listed, and for the appropriate auditing of subsequent products, as required. Please note that this list of tests may only comprise a partial list of the tests that are required before a FCC or IC label can be produced by the manufacturer. This is to certify that the following report is true and correct to the best of our knowledge.

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 6 of 19 PRODUCT DESCRIPTION Applicant: Versa Wireless Equipment Under Test: Versa H Model Number: Versa H Date of Test: Jan-02-2015 to Jan-16-2015 EUT DESCRIPTION EUT Versa H The device is a security sensor for windows. When the window is opened, a magnet is separated from the reed switch on the sensor, which triggers a change of state on the sensor’s microprocessor. The microprocessor then powers up the RF transmitter (Pulse Width Modulated OOK) and sends two sets of six identical packets (sextets) that flag the change of state to a receiver. The 12 packets (total) are sent with a random delay between them of 100 mS to 130 mS. The two Operational Description sextets have a random delay between them of 0.580Sec to 1.430Sec. When there is no change of state occurring, the device goes into a very low-power mode, and wakes up 4x a second to check and see if there is a change of state on the reed switch. The sensor times out every 72 minutes and transmits a “heartbeat” message to allow the receiver to know it is still operational. Further, a battery level indicator (ok, or low) is sent with every message packet allowing a service technician to change the battery when it gets low. FRN 0024185001 FCC ID 2AD9XVERSAH Manufacturer Versa Wireless Model/Type Versa H Transmitter Type Short range device Transmitter Frequency 344.97 MHz Transmit Power 71.29 dBµV/m @ 3m Number of Channels N/A Antenna Wire loop antenna EUT Power 3Vdc, Coin cell, CR2032 Received Date Jan-01-2015 Received By Aman Sample Log QAI Product Control Log (QM 1305 - Sample Inventory)

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 7 of 19 FACILITIES AND ACCREDITATION Main Laboratory Headquarters: Quality Auditing Institute Headquarters Location/Address: 16 – 211 Schoolhouse Street, Coquitlam, BC, 3K 4X9, Canada Associated Laboratory: Quality Auditing Institute (Remote Location) EMC Test Laboratory Location/Address: 19473 Fraser Way, Pitt Meadows, BC, V3Y 2V4, Canada FCC Test Site Registration Number: (3 m /10 m Open Area Test Site [OATS] and 3 m Semi-Anechoic Chamber [SAC]): 226383 FCC Designation Number: CA9543 Industry Canada Test Site Registration Number (3m SAC) :9543B-1 Industry Canada Test Site Registration Number (OTAS) :9543C-1 Standard Council of Canada: ISO/IEC 17025:2005 Accredited Laboratory No. 743 International Accreditation Service Inc.: ISO/IEC 17025:2005 Accredited Laboratory: No. TL-239 ENVIROMENTAL CONDITIONS: INDOORS, Temperature: 22-28ºC, R.H.: 39.7 - 54.4% TESTING METHODOLOGY These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC CFR47, Part 15, Subpart C Section 15.231, 15.205, RSS Gen issue 4 & RSS 210 issue 8, Annex 1. Radiated tests were conducted in accordance with ANSI C63.4-2003 and ANSI C63.10:2013 EUT TESTING CONFIGURATION EUT was powered up by 3Vdc of Coin cell CR2032 and set up to transmit continuously in modulated modes of operation. WORST TEST CASE Worst-case orientation was determined by rotating the EUT on three axis, during the pre-compliance test and final radiated emissions tests were performed in that orientation. GENERAL TEST PROCEDURES Radiated Emissions The EUT is placed on the turntable 0.8m above a ground plane 3m away from a receiving antenna. Height of receiving antenna varied from 1m to 4m, its polarity changes from vertical to horizontal. Turntable rotates 360 degrees. Motion of turntable and receiving antenna allows determining position of maximum emission level. Quasi-peak detector applies for measurements of emissions with frequency range of 30 to 1000MHz. and average/peak detector otherwise. AC Mains Conducted Emissions No applicable, as the EUT is powered by a coin cell battery.

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 8 of 19 MEASUREMENT UNCERTAINTY Radio Frequency ....................................................: ±1,5 x 10-5 Total RF power, conducted....................................: ±1 dB RF power density, conducted.................................: ±2.75 dB Spurious emissions, conducted.............................: ±3 dB All emissions, radiated...........................................: ±3.5 dB Temperature...........................................................: ±1ºC Humidity.................................................................: ±5 % DC and low frequency voltages..............................: ±3 % TEST EQUIPMENT LIST Emmission Testing Equipment Manufacturer Model Description Serial No. Last Cal Cal Due Date Sunol Sciences SM46C Turntable 051204-2 N/A N/A Sunol Sciences TWR95 Mast TREML0001 N/A N/A Biconilog Antenna Sunol Sciences JB3 A042004 31-Oct-2012 31-Oct-2015 30MHz – 3GHz ETS Lindgren 2165 Turntable 00043677 N/A N/A ETS Lindgren 2125 Mast 00077487 N/A N/A Rohde & ESU40 EMI Receiver 100011 2014-11-20 2017-11-20 Schwarz 5 meter Semi-Anechoic ETS Lindgren S201 1030 N/A N/A Chamber Dual Ridge Horn ETS Lindgren 3117 00075944 29-Aug-13 29-Aug-15 Antenna Amplifier Conditional AH Systems PAM118 189 Conditional Use 10KHz-18GHz Use Electro- 6502 Loop Antenna 2178 8/21/2014 8/21/2017 Mechanics Measurement Software List Manufacturer Model Version Description Emissions Pre-scan Test Rhode & Schwarz EMC 32 6.20.0 Software

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 9 of 19 Part 1 - Radiated Emissions Testing (Unintentional Mode) DATE: Jan-02-2015 TEST STANDARD: FCC CFR47 Part 15 Subpart B; RSS Gen issue 4, ICES-003 Issue 5 MINIMUM STANDARD: Except as provided elsewhere in FCC CFR47, Part 15, Subpart C & RSS 210 issue 8, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table Frequency (MHz) Field Strength (dBμV/m) at 3m 30 – 88 40 88 – 216 43.5 216 - 960 46 960 – above 54 Note: In the above emission table, the tighter limit applies at the band edges. TEST SETUP: The EUT was placed on a turntable, which is 0.8 m above ground plane. Emissions in both horizontal and vertical polarizations were measured while rotating the EUT on a turntable and moving the receiving antenna from 1m to 4 m high to maximize the emissions signal strength. The equipment was set up in a 3-meter Semi Anechoic Chamber for preliminary measurements and finals were completed in 3m/10m Open Air Test Site at 3 meters. MODIFICATIONS: No modification is required to comply for this test. PERFORMANCE: Complies with standard. MEASUREMENT DATA & PLOT: 80 70 60 FCC P art 15 Class B Electric Field Strength QP 50 EN 55022 Electric Field Strength 3m QP Level in dBµV/m 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Note: All radiated emissions were at least 20 dB below the required limit line.

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 10 of 19 Part 2 - Transmitter Radiated Emissions Testing DATE: Jan-02-2015 TEST STANDARD: FCC CFR47 Part 15 Subpart C 15.231 15.205; RSS Gen issue 4 & RSS 210 issue 8, Annex 1 MINIMUM STANDARD: The radiated emissions of fundamental and spurious frequency from the DUT shall meet the limits below: Fundamental Field Strength of Field Strength of Frequency (MHz) Fundamental (μV/m) Spurious Emission (μV/m) 40.66 - 40.70 2250 225 70 - 130 1250 125 130 - 174 1250 - 3750** 125-375** 174 - 260 3750 375 260 - 470 3750 - 12500** 375-1250** Above 470 12500 1250 Note: 1) In the above emission table, the tighter limit applies at the band edges. 2) ** Linear interpolations. Except as otherwise described in the standards, only spurious emissions are permitted in any of the Frequency bands listed below: If there is field strength of spurious emissions appearing within these restricted bands, it shall not exceed the limits shown in the below table Frequency (MHz) Field Strength (dBμV/m) at 3m 30 – 88 40 88 – 216 43.5 216 - 960 46 960 – above 54 Note: In the above emission table, the tighter limit applies at the band edges.

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 11 of 19 TEST SETUP: The EUT was placed on a turntable, which is 0.8 m above ground plane. Emissions in both horizontal and vertical polarizations were measured while rotating the EUT on a turntable and moving the receiving antenna from 1m to 4 m high to maximize the emissions signal strength. The equipment was set up in a 3-meter Semi Anechoic Chamber for preliminary measurements and finals were completed in 3m/10m Open Air Test Site at 3 meters. Measurements were also performed from 9 kHz to 30 MHz with active loop antenna, but no emissions were found in that range. DEVICE DESCRIPTIONS: Refer to the Equipment Under Test Section. MODIFICATIONS: No modification is required to comply for this test. PERFORMANCE: Complies with standard. MEASUREMENT DATA: 80 70 60 50 Level in dBµV/m 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Radiated Emissions 150 kHz-30 MHz at 3m - TX mode

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 12 of 19 80 70 60 FCC P art 15 Class B Electric Field Strength QP EN 55022 Electric Field Strength 3m QP 50 Level in dBµV/m 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Radiated Emissions 30MHz-1GHz at 3m - TX mode Radiated Emissions 30MHz-1GHz at 3m - TX mode Duty Uncorr- Uncorr Ant Cable Corrected Freq. Pol. Atten. Cycle Limit EUT Peak Qpk Angle Height factor Loss Avg (MHz) (V/H) (dB) correction (dBuV/m) Position (dBuV/m) (dBuV/m) (dB) (dB) (dBuV/m) factor 345 70.9 70.05 360 100 H 14 6 1.69 -21.3 71.29 77.25 345 53.03 52.23 12 152 V 14 6 1.69 -21.3 53.42 77.25 Horizontal 690 21.58 20.02 69 112 H 19.6 6 2.53 -21.3 28.41 57.25 690 18.1 16.2 100 360 V 19.6 6 2.53 -21.3 24.93 57.25

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 13 of 19 110 100 90 80 70 Level in dBµV/m 60 FCC P art 15 Class B 1-40GHz A V_54 50 40 30 20 10 0 1G 2G 3G 4G 5G Frequency in Hz Radiated Emissions 1GHz-3.3GHz at 3m - TX mode Radiated Emissions 1GHz-3.3GHz at 3m - TX mode Duty Uncorr- Uncorr Ant Corrected Freq. Pol. Cycle Limit EUT Peak Avg Angle Height factor Gain Avg (MHz) (V/H) correction (dBuV/m) Position (dBuV/m) (dBuV/m) (dB) (dBuV/m) factor 1035 40.38 29.05 278.5 100 H 28.5 -10.23 -21.3 37.35 57.25 1035 37.73 26.23 77 100 V 28.5 -10.23 -21.3 34.70 57.25 1380 46.81 38.88 238 100 H 28.7 -29.11 -21.3 25.10 57.25 1380 42.33 32.92 272 133 V 28.7 -29.11 -21.3 20.62 57.25 1725 52.66 45.52 192 100 H 29.7 -28.82 -21.3 32.24 57.25 1725 49.5 41.99 268 103 V 29.7 -28.82 -21.3 29.08 57.25 2070 52.5 45.03 293 103 H 31.8 -28.48 -21.3 34.52 57.25 Horizontal 2070 48.51 40.79 200 100 V 31.8 -28.48 -21.3 30.53 57.25 with 2415 52.48 45.09 293 105 H 32.5 -25.88 -21.3 37.80 57.25 1300+ filter 2415 48.24 40.66 200 100 V 32.5 -25.88 -21.3 33.56 57.25 2760 59.04 50.9 302 105 H 32.6 -25.19 -21.3 45.15 57.25 2760 54.82 46.6 331 140 V 32.6 -25.19 -21.3 40.93 57.25 3105 60.74 52.48 273 100 H 32.9 -26.16 -21.3 46.18 57.25 3105 61.7 53.59 332 100 V 32.9 -26.16 -21.3 47.14 57.25 3450 60.97 52.77 202 127 H 32.9 -26.71 -21.3 45.86 57.25 3450 58.97 50.75 4.3 125 V 32.9 -26.71 -21.3 43.86 57.25 Radiated emissions Data for Restricted Band Duty Uncorr- Uncorr Ant Corrected Freq. Pol. Cycle Limit EUT Peak Avg Angle Height factor Gain Avg (MHz) (V/H) correction (dBuV/m) Position (dBuV/m) (dBuV/m) (dB) (dBuV/m) factor 1035 40.38 29.05 278.5 100 H 28.5 -10.23 -21.3 37.35 54 1035 37.73 26.23 77 100 V 28.5 -10.23 -21.3 34.70 54 Horizontal 1380 46.81 38.88 238 100 H 28.7 -29.11 -21.3 25.10 54 with 1380 42.33 32.92 272 133 V 28.7 -29.11 -21.3 20.62 54 1300+ filter 2760 59.04 50.9 302 105 H 32.6 -25.19 -21.3 45.15 54 2760 54.82 46.6 331 140 V 32.6 -25.19 -21.3 40.93 54

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 14 of 19 Part 3 - Duty CycleTesting DATE: Jan-16-2015 TEST STANDARD: FCC Past 15.35 MINIMUM STANDARD: (c) Unless otherwise specified, e.g., §§15.255(b), and 15.256(l)(5), when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. DATA & PLOT: Data Transmissions Number of pulses Packet time 17msec Medium Pulse 0.267 11 Short pulse Duration 0.134 msec 42 Total Transmissions Duration (11x0.267) + (42 x 0.134) = 8.565 msec On time within 100 msec 8.565msec Duty cycle Correction factor 20log(8.565/100) = -21.4dB RBW 2 MHz Marker 1 [T1 ] VBW 5 MHz 72.05 dBµV Ref 87 dBµV * Att 0 dB SWT 25 ms -10.010010 µs Delta 2 [T1 ] -1.27 dB 80 17.099672 ms A 1 2 1 PK * 70 CLRWR TRG TRG 63 dBµV 60 50 PS 40 3DB 30 AC 20 10 0 -10 Center 345 MHz 2.5 ms/ Number of pulses Date: 16.JAN.2015 04:20:07

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 15 of 19 RBW 2 MHz Delta 2 [T1 ] VBW 5 MHz -1.30 dB Ref 87 dBµV * Att 0 dB SWT 5 ms 267.142142 µs Marker 1 [T1 ] 72.31 dBµV 80 4.342670 ms A 1 2 1 PK * 70 CLRWR TRG TRG 63 dBµV 60 50 PS 40 3DB 30 AC 20 10 0 -10 Center 345 MHz 500 µs/ Medium Pulse Duration Date: 16.JAN.2015 04:31:50 RBW 2 MHz Marker 1 [T1 ] VBW 5 MHz 73.02 dBµV Ref 87 dBµV * Att 0 dB SWT 1 ms -900.900901 ns Delta 2 [T1 ] -1.24 dB 80 133.951259 µs A 1 2 1 PK * 70 CLRWR TRG TRG 63 dBµV 60 50 PS 40 3DB 30 AC 20 10 0 -10 Center 345 MHz 100 µs/ Short Pulse Duration Date: 16.JAN.2015 04:25:26

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 16 of 19 Part 4 - 20 dB Bandwidth Testing DATE: Jan-16-2015 TEST STANDARD: FCC CFR47 Part 15 Subpart C 15.231; RSS Gen issue 4 & RSS 210 issue 8, Annex 1 MINIMUM STANDARD: The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5% of the center frequency. Bandwidth is determined at the points 20 dB down from the modulated carrier. MODIFICATIONS: No modification is required to comply for this test. DATA & PLOT: 20 dB Bandwidth = 46.52kHz < 0.25% X 345MHz (862.5kHz) * RBW 10 kHz Delta 3 [T1 ] VBW 30 kHz -20.01 dB Ref 87 dBµV * Att 0 dB SWT 10 ms -23.397435899 kHz Marker 1 [T1 ] 68.65 dBµV 80 345.000500501 MHz A Delta 2 [T1 ] 1 PK 1 70 -20.30 dB VIEW 23.123123123 kHz 60 3 2 50 PS 40 6DB 30 AC 20 10 0 -10 Center 345 MHz 20 kHz/ Span 200 kHz PERFORMANCE: Complies with standard. Date: 16.JAN.2015 01:29:46

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 17 of 19 Part 5 - Transmitter Time Testing DATE: Jan-15-2015 TEST STANDARD: FCC CFR47 Part 15 Subpart C 15.231; RSS Gen issue 4 & RSS 210 issue 8, Annex 1 MINIMUM STANDARD: (1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. (2) A transmitter activated automatically shall cease transmission within 5 seconds after activation. MODIFICATIONS: No modification is required to comply for this test. DATA & PLOT: The Active time is less than 3 seconds RBW 2 MHz Delta 2 [T1 ] VBW 5 MHz -0.15 dB Ref 87 dBµV * Att 0 dB SWT 10 s 727.488642 ms Marker 1 [T1 ] 71.59 dBµV 80 2.147396 s A 1 2 1 PK * 70 CLRWR TRG TRG 63 dBµV 2 PK * 60 CLRWR 50 PS 40 3DB 30 AC 20 10 0 -10 Center 345 MHz 1 s/ Date: 16.JAN.2015 04:15:48 PERFORMANCE: Complies with standard

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 18 of 19 Test Setup Pictures Radiated Emission test setup in Semi Anechoic Chamber – below 30MHz Radiated Emission test setup in Semi Anechoic Chamber – 30MHz - 1GHz

Client: Versa Wireless Job No.: E10676-1402 Date: Feb-25-2015 Page 19 of 19 Radiated Emission test setup in Semi Anechoic Chamber – above 1GHz Radiated Emission test setup in Semi Anechoic Chamber


Document Created: 2015-02-24 22:49:24
Document Modified: 2015-02-24 22:49:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC