Test Report

FCC ID: 2AD9X-KFG

Test Report

Download: PDF
FCCID_4436553

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada ELECTROMAGNETIC COMPATIBILITY TEST REPORT Report Reference Number: E10676-1901_Versa Wireless_KFG_Rev1.2 Total Number of Pages: 33 Date of Issue: August 15, 2019 EMC Test Laboratory: QAI Laboratories Inc. Address: 3980 North Fraser Way, Burnaby, BC, V5J 5K5 Canada Phone: (604) 527-8378 Fax: (604) 527-8368 Laboratory Accreditations (per ISO/IEC 17025:2005): American Association for Laboratory Accreditation Certificate Number: 3657.02 This report has been completed in accordance with the requirements of ISO/IEC xxxx5. Test results contained in this report are within QAI Laboratories ISO/IEC xxxx5 accreditation. QAI Laboratories authorizes the applicant to reproduce this report, provided it is reproduced in its entirety and for the use by the company’s employees only. EMC Client: Versa Wireless Address: 103 - 19292 60th Ave., Surrey, BC V3S 3M2, Canada Phone: (604) 427-0857 Applicable Test Standards: FCC Title 47 CFR Part 15: Subpart B FCC Title 47 CFR Part 15: Subpart C 15.231 ICES-003 Issue 6 RSS-210 Issue 9 RSS-Gen Issue 5 Equipment Tested: Security System Keyfob with 4 Buttons Model Number(s): KFG FCC ID: 2AD9X-KFG IC Certification Number: 12637A-KFG Manufacturer: Versa Wireless

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada REVISION HISTORY Rev Author’s Date Report Number Details # Initials 1. FCC ID/IC Cert No. corrected on August 15, E10676_1901_VersaWireless_KFG_Rev Pg.1 and 7; 1.2 2. Equipment list corrected; MK 2019 3. Receiver Emissions corrected. 1. Horn antenna info corrected (p. August 6, E10676_1901_VersaWireless_KFG_Rev 10), 1.1 2. MPE Section deleted, MK 2019 3. Antenna gain corrected (p. 7). July 23, 2019 E10676_1901_VersaWireless_KFG_Rev 1.0 final MK July 12, 2019 E10676_1901_VersaWireless_KFG_Rev 0.0 draft MK All previous versions of this report have been superseded by the latest dated revision as listed in the above table. Please dispose of all previous electronic and paper printed revisions accordingly. REPORT AUTHORIZATION The data documented in this report is for equipment provided by Versa Wireless. The tests were performed on the sample equipment as requested by Versa Wireless for the purpose of demonstrating compliance with FCC Title 47 CFR Part 15: Subpart B and Subpart C, 15.231, ICES-003 Issue 6, RSS-210 Issue 9, and RSS-Gen Issue 5 as agreed upon by Versa Wireless as per Quote 19SH01241. Versa Wireless is responsible for the tested product configuration, continued product compliance, and for the appropriate auditing of subsequent products as required. This report may comprise partial list of tests that are required for FCC or IC Declaration of Conformity and can only be produced by the manufacturer. This is to certify that the following report is true and correct to the best of our knowledge. _____________________________ Radio Testing by Bruce Balston, Senior _____________________________ ____________________________ RF/EMC Test Engineer Emissions Testing & Report by Maryam Approved by Parminder Singh Kashi, RF/EMC Test Engineer Director of EMC Department Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 2 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada QAI FACILITIES Founded in 1994 by a group of experienced certification and testing experts, QAI is an independent third-party testing, inspection and certification organization which serves the building industry, government and individuals with cost effective solutions through our in- house capabilities / services, and an established world-wide network of qualified affiliates. To help get your product to market, trust the provider that many leading global manufacturers do: QAI. British Columbia Ontario Virginia QAI Laboratories Inc. QAI Laboratories Inc. QAI Laboratories Ltd. Main Laboratory/Headquarters 1081 Meyerside Drive, Unit #14 1047 Zachary Taylor Hwy, 3980 North Fraser Way, Mississauga, ON L5T 1M4 Canada Suite A Huntly, VA 22640 USA Burnaby, BC V5J Canada California Oklahoma QAI Laboratories Ltd. QAI Laboratories Ltd. 8385 White Oak Avenue Rancho 108th East Avenue, Cucamonga, CA 91730 USA Tulsa, OK 74116 USA QAI EMC ACCREDITATION QAI EMC is your one-stop regulatory compliance partner for electromagnetic compatibility (EMC) and electromagnetic interference (EMI). Products are tested to the latest and applicable EMC/EMI requirements for domestic and international markets. QAI EMC goes above and beyond being a testing facility—we are your regulatory compliance partner. QAI EMC has the capability to perform RF Emissions and Immunity for all types of electronics manufacturing including Industrial, Scientific, Medical, Information Technology, Telecom, Wireless, Automotive, Marine and Avionics. EMC Laboratory Location FCC Designation (3m SAC) IC Registration (3m SAC) A2LA Certificate Burnaby, BC, Canada CA9543 21146-1 3657.02 Headquarters & EMC Laboratory in Burnaby, BC Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 3 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada TABLE OF CONTENTS REVISION HISTORY ........................................................................................................................................................................ 2 REPORT AUTHORIZATION ........................................................................................................................................................... 2 QAI FACILITIES ............................................................................................................................................................................... 3 QAI EMC ACCREDITATION .......................................................................................................................................................... 3 TABLE OF CONTENTS .................................................................................................................................................................... 4 Section I: EXECUTIVE SUMMARY ....................................................................................................................................................... 5 1.1 Purpose .................................................................................................................................................................................... 5 1.2 Scope ........................................................................................................................................................................................ 5 1.3 Summary of Results ................................................................................................................................................................ 5 Section II: GENERAL INFORMATION .................................................................................................................................................. 6 2.1 Product Description ................................................................................................................................................................ 6 2.2 Environmental Conditions ..................................................................................................................................................... 8 2.3 Measurement Uncertainty ...................................................................................................................................................... 8 2.4 Worst Test Case ...................................................................................................................................................................... 8 2.5 Sample Calculations of Emissions Data ................................................................................................................................ 9 2.6 Test Equipment List ............................................................................................................................................................. 10 Section III: TEST RESULTS ................................................................................................................................................................... 11 3.1 Antenna Requirement........................................................................................................................................................... 11 3.2 Transmission Time ................................................................................................................................................................ 12 3.3 Duty Cycle Correction Factor Calculation ......................................................................................................................... 14 3.4 Field Strength of Carrier Frequency ................................................................................................................................... 16 3.5 99% Occupied Bandwidth .................................................................................................................................................... 17 3.6 Intentional Spurious Emissions ........................................................................................................................................... 19 3.7 Receiver Radiated Emissions ............................................................................................................................................... 25 Appendix A: TEST SETUP PHOTOS ..................................................................................................................................................... 27 Appendix B: ABBREVIATIONS ............................................................................................................................................................ 32 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 4 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Section I: EXECUTIVE SUMMARY 1.1 Purpose The purpose of this report is to demonstrate and document the compliance of “KFG’ as per Sections 1.2 & 1.3 of this report. 1.2 Scope The information documented in this report is based on the test methods and levels as per Quote 19SH01241: - FCC Title 47 CFR Part 15 – Radio Frequency Devices, Subpart B- Unintentional Radiators. - ICES-003 Issue 6 – Information Technology Equipment (Including Digital Apparatus) – Limits and methods of measurement. - FCC Title 47 CFR Part 15 – Radio Frequency Devices, Subpart C - Intentional Radiators o §15.231 - Periodic Operation in the band 40.66-40.70 MHz and above 70 MHz - RSS-210 Issue 9 – License-exempt Radio Apparatus (All Frequency Bands): Category I Equipment o Annex 1 - Momentarily Operated Devices and Remote Control - RSS-Gen Issue 5 – General Requirements and Information for the Certification of Radio Apparatus 1.3 Summary of Results The following tests demonstrate the testimony to “FCC and IC” Mark Electromagnetic compatibility radio testing for the “Versa Plus” device manufactured by Ion Digital Canada. The following testing was performed pursuant to FCC & IC Radio and RF Emissions Standards Applicable FCC Applicable IC Test Description Test Method Result Test Standard Test Standard Title 47 CFR Part 15: Subpart C Antenna Requirement Rss-Gen Issue 5 Section 7.1.2 N/A PASS §15.203 Title 47 CFR Part 15: Subpart C RSS-210 Issue 9 Transmission Time N/A PASS §15.231 (a) Title 47 CFR Part 15: Subpart C ANSI C63.10-2013 Duty cycle Correction Factor CaLculation Rss-Gen Issue 4 PASS Title 47 CFR Part 15: Subpart C RSS-210 Issue 9 Field Strength of Carrier Frequency ANSI C63.10-2013 PASS §15.231 (b) RSS-Gen Issue 5 Title 47 CFR Part 15: Subpart C RSS-210 Issue 9 99% Occupied Bandwidth ANSI C63.10-2013 PASS §15.231 (c) RSS-Gen Issue 4 Title 47 CFR Part 15: Subpart C RSS-210 Issue 9 Intentional Spurious Emissions ANSI C63.10-2013 PASS §15.231 (b) RSS-Gen Issue 5 Receiver Radiated Title 47 CFR Part 15: Subpart B RSS-Gen Issue 5 ANSI C63.4-2014 PASS Emissions §15.109 in Restricted Bands Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 5 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Section II: GENERAL INFORMATION 2.1 Product Description The information provided in this section is for the Equipment Under Test (EUT) and corresponding Auxiliary Equipment required to perform the tests as a complete system. EUT – KFG: Casing, normal-operation and CW units Battery – 3VDC CR2032 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 6 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Equipment Under Test (EUT) Information EUT Security System Keyfob with 4 Buttons Description Momentary transmitter FCC ID 2AD9X-KFG IC Number 12637A-KFG Manufacturer Versa Wireless Model No. KFG PMN Versa KeyfobG Serial No. Operating Frequency 319.5 MHz Transmit Power -7 dBm e.i.r.p. Modulation Type ASK - OOK Test Channels 319.5 MHz Data Rate 2 kbps Antenna Type Loop Antenna Gain -25 dBi Input Power CR2032, Coin Cell Battery, 3VDC Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 7 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 2.2 Environmental Conditions The equipment under test was operated and tested under the following environmental conditions: Parameter Conditions Location Indoors Temperature 22-28ºC Relative Humidity 39.7 - 54.4% 2.3 Measurement Uncertainty Parameter Uncertainty Radiated Emissions, 30MHz-1GHz ± 2.40 dB Radiated Emissions, 1GHz-40GHz ± 2.48 dB Radio Frequency ±1.5 x 10-5 MHz Total RF Power Conducted ±1.36 dB Spurious Emissions, Conducted ±1.36 dB RF Power Density, Conducted ±1.36 dB Temperature ±1ºC Humidity ±5 % DC and low frequency voltages ±3 % 2.4 Worst Test Case Worst-case orientation was determined during the preliminary testing. The final radiated emissions were performed in the worst-case orientation. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 8 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 2.5 Sample Calculations of Emissions Data Radiated and conducted emissions were performed using EMC32 software developed by Rohde & Schwarz. Transducer factors like Antenna factors, Cable Losses and Amplifier gains were stored in the test templates which are used to perform the emissions measurements. After test is finished, data is generated from the EMC32 consisting of product details, emission plots and final data tables as shown below. Meas. Ant. Turntable Frequency Q-Peak Bandwidth Corr. Margin Limit Time Ht. Pol position (MHz) (dBµV/m) (kHz) (dB) (dB) (dBµV/m) (ms) (cm) (deg) 42.663900 33.0 1000.000 120.000 100.0 H 70.0 13.2 7.5 40.5 Quasi Peak reading shown in the table above is already corrected by the software using correction factor shown in column “Corr.” The correction factor listed under “Corr.” table calculated as: Corr.(dB) = Antenna factor + Cable loss Or Corr. (dB) = Antenna factor + Cable Loss - Amp gain (if pre-amplifier was used) The final Quasi-peak reading shown in the data is calculated by the software using following equation: Corrected Quasi Peak (dBµV/m) = Raw Quasi-Peak Reading + Antenna factor + Cable loss To obtain the final Quasi-Peak or Average reading during power line conducted emissions, transducer factors are included in the final measurement as shown below. Frequency Q-Peak Meas. Time Bandwidth Corr. Margin Limit PE (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 0.150 44.3 1000.000 9.000 GND 0.6 21.7 66.0 Frequency Average Meas. Time Bandwidth Corr. Margin Limit PE (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 0.150 27.2 1000.000 9.000 GND 0.6 28.8 56.0 Quasi-Peak or Average reading shown in above table is already corrected by the software using the correction factor shown in column “Corr.” The correction factor listed under “Corr.” table calculated as: Corr.(dB) = Antenna factor + Cable loss The final Quasi-peak or Average reading shown in the data is calculated by the software using following equation: Corr. Quasi-Peak/Average Reading (dBµV) = Raw Quasi Peak/Average Reading + Antenna factor + Cable loss The allowable margins from the limits, as per the standards, were calculated for both radiated and conducted emissions: Margin (dB) = Limit – Quasi-Peak or Average reading Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 9 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 2.6 Test Equipment List The tables below contain all the equipment used by QAI Laboratories in conducting all tests on the Equipment Under Test (EUT) as per Section 1.3. Emissions Test Equipment Calibration Manufacturer Model Description Serial No. Due Date Sunol Sciences SM46C Turntable 051204-2 N/A Sunol Sciences TWR95 Mast TREML0001 N/A EMCO 6502 Loop Antenna 6502 11/13/2020 Biconilog Antenna Sunol Sciences JB1 A070209 2020-Aug-16 30MHz – 2GHz Horn Antenna ETS Lindgren 3117 75944 2020-Aug-29 1GHz-18GHz ETS Lindgren 2165 Turntable 00043677 N/A ETS Lindgren 2125 Mast 00077487 N/A Rohde & Schwarz ESU40 EMI Receiver 100011 2019-Dec-01 LISN EMCO 3825/2 9002-1601 2020-08-25 (9kHz-30MHz) ETS Lindgren S201 5-meter Semi-Anechoic Chamber 1030 N/A Amplifier AH Systems PAM118 189 Conditional Use 10KHz-18GHz WEINSCHEL ENGINEERING 44 6db attenuator 665 N/A Insulated Wire Inc. SPS-1753-1140-SPS Yellow cable, 3m 102395 N/A Insulated Wire Inc. SPS-1753-2400-SPS Yellow cable, 6m 091096 N/A Note: Equipment listed above have 3 years calibration interval. Measurement Software List Manufacturer Model Version Description Rhode & Schwarz EMC 32 6.20.0 Emissions Test Software Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 10 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Section III: TEST RESULTS 3.1 Antenna Requirement Date Performed: March 26, 2019 Test Standard: FCC 47 CFR Part 15.203 and IC RSS-Gen Section 7.1.2 Applicable Regulation: The purpose of this requirement is to make certain that no other antenna, except for that provided by the responsible party, shall be used with the Equipment-Under-Test (EUT) as defined in FCC CFR 47 Part 15.203 & RSS-Gen: “An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited.” … “the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this Part are not exceeded.” Modifications: No modification was required to comply for this test. Result: An integrated antenna is used on this product and it is not field replaceable. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 11 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.2 Transmission Time Date Performed: March 26, 2019 Test Standard: o Title 47 CFR Part 15: Subpart C, §15.231 (a) o RSS-210 Issue 9, A.1.1 Requirement(s): o A manually operated transmitter shall be equipped with a push-to-operate switch and be under manual control at all times during transmission. When released, the transmitter shall cease transmission within no more than 5 seconds of being released. o A transmitter that has been activated automatically shall cease transmission within 5 seconds of activation. Result: The EUT complies with the applicable standard. Data/Plot: RBW 1 MHz Marker 4 [T1 ] VBW 3 MHz -57.71 dBm Ref 3.5 dBm * Att 0 dB SWT 10 s 17.147500 ms Marker 1 [T1 ] 0 -57.46 dBm 0.000000 s B -10 Delta 2 [T2 ] 1 PK * -0.21 dB CLRWR TRG 1.086250 ms -20 Marker 3 [T1 ] 2 AP -57.71 dBm CLRWR 16.667500 ms -30 -40 -50 3DB 1 2 3 4 -60 TRG -60.1 dBm -70 -80 -90 Center 319.5 MHz 1 s/ Plot 1: Transmission Time Measurement Date: 26.MAR.2019 23:07:13 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 12 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Measured TX Limit Result Transmission Time 3. 1 s <5s PASS Table 1: Transmission time measurement data Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 13 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.3 Duty Cycle Correction Factor Calculation Date Performed: March 26, 2019 Requirement(s): o § 15.35(c) - Unless otherwise specified, e.g. § 15.255(b), when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. Method of Measurement: o ANSI C63.10-2013 standard. Data/Plot: ` RBW 1 MHz Marker 3 [T1 ] VBW 3 MHz -48.47 dBm Ref 3.5 dBm * Att 0 dB SWT 20 ms 3.593750 ms Marker 1 [T1 ] 0 -49.35 dBm 0.000000 s B -10 Delta 2 [T2 ] 1 PK * 0.02 dB CLRWR TRG 1.086250 ms -20 Marker 4 [T1 ] 2 AP -49.37 dBm CLRWR 3.708438 ms -30 -40 1 2 34 -50 3DB -60 TRG -60.1 dBm -70 -80 -90 Center 319.5 MHz 2 ms/ Date: 26.MAR.2019 23:03:51 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 14 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Table 2: Duty Cycle Correction Factor Calculation Data Transmissions Number of pulses Long Pulse Duration 1.086 ms 1 Medium Pulse Duration 0.475 ms 1 Short pulse Duration 0.114 ms 59 Total Transmissions Duration (1x1.086) + (1x0.475) + (59x0.114) = 8,287 ms On Time within 100 msec 8.287 ms Duty Cycle Correction factor 20log (8.287/100) = -21.63 dB Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 15 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.4 Field Strength of Carrier Frequency Date Performed: March 23, 2018 Test Standard: o Title 47 CFR Part 15: Subpart C, §15.231 (b) o RSS-210 Issue 9, A.1.2 o RSS-Gen Issue 5, 8.9 & 8.10 Test Method: o ANSI C63.10-2013 Required Limit(s): The field strength of emissions from intentional radiators operated under this section (§15.231) shall not exceed the following: Fundamental Field strength of Field strength of Frequency, f Fundamental Fundamental (MHz) (µV/m) (dBµV/m) 40.66 – 40.70 2250 67.0 70 – 130 1250 62.0 130 – 174 1250 – 3750* 62.0 – 71.5* 174 – 260 3750 71.5 260 – 470 3750 – 12500* 71.5 – 82.0* above 470 12500 82.0 *- Linear interpolation with frequency, f, in MHz: For 130-174 MHz: Field Strength (µV/m) = (56.82 x f) – 6136 For 260-470 MHz: Field Strength (µV/m) = (41.67 x f) – 7083 Note 1: The above field strength limits are specified at a distance of 3 meters. The tighter limits apply at the band edges. Data & Plot: EUT Duty Raw System Corrected Orientation Ant. Cycle Limit Freq. Peak at Loss/Correction Peak at Avg FS Margin Pol. Corr. Avg 3m Factor 3m Factor MHz dBuV/m dB dBuV/m dB dBuV/m dBuV/m dB Flat, 319.5 64.8 V 23.3 88.1 21.63 66.5 80.8 14.3 Buttons up Flat, 319.5 50.3 H 23.3 73.6 21.63 52.0 80.8 28.8 Buttons up Note: EUT was tested in xy (flat), yz, and xz-plane orientations. Reported results above pertain to the worst case. Result: The EUT complies with the applicable standard. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 16 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.5 99% Occupied Bandwidth Date Performed: March 26, 2019 Test Standard: o Title 47 CFR Part 15: Subpart C, §15.231 (c) o RSS-210 Issue 9, A.1.3 o RSS-Gen Issue 5, 6.6 Test Method:18.6 o ANSI C63.10-2013 Required Limit(s): o The 99% bandwidth of momentarily operated devices shall be less or equal to 0.25% of the centre frequency for devices operating between 70 MHz and 900 MHz. For devices operating above 900 MHz, the 99% bandwidth shall be less or equal to 0.5% of the centre frequency. Method of Measurement: o As called in the ANSI C63.10-2013 standard. Modifications: No modification was required to comply for this test. Result: The EUT complies with the applicable standard. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 17 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Data/Plot: * RBW 3 kHz Delta 2 [T1 ] VBW 10 kHz -20.29 dB Ref -40 dBm * Att 0 dB SWT 115 ms -7.437500000 kHz -40 Marker 1 [T1 ] 1 FCC5GCBE -48.52 dBm 319.502000000 MHz B -50 Delta 3 [T1 ] 1 PK -20.08 dB MAXH -60 11.125000000 kHz 2 AP 23 CLRWR -70 -80 -90 SWP 5 of 5 3DB -100 -110 -120 -130 -140 Center 319.5 MHz 100 kHz/ Span 1 MHz Plot 2: 99% Occupied Bandwidth Date: 26.MAR.2019 23:47:36 Table 5: 99% OBW Data Frequency Measured 99% BW Limit Result (MHz) (MHz) (MHz) 319.5 0.0186 1082.5 PASS Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 18 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.6 Intentional Spurious Emissions Date Performed: 1-6 GHz: March 15, 2019 30 MHz-1 GHz: March 25, 2019 1 kHz – 30 MHz: April 11, 2019 Test Standard: o Title 47 CFR Part 15: Subpart C, §15.231 (b) o RSS-210 Issue 9, A.1.2 o RSS-Gen Issue 5, 8.9 & 8.10 Test Method: o ANSI C63.10-2013 Required Limit(s): The field strength of emissions from intentional radiators operated under this section (§15.231) shall not exceed the following: Field strength of Field strength of Fundamental Field strength of Field strength of Spurious Emissions Spurious Frequency, f Fundamental Fundamental (µV/m) Emissions (MHz) (µV/m) (dBµV/m) (dBµV/m) 40.66 – 40.70 2250 67.0 225 47.0 70 – 130 1250 62.0 125 62.0 130 – 174 1250 – 3750* 62.0 – 71.5* 125 – 375* 42.0 – 51.5* 174 – 260 3750 71.5 375 51.5 260 – 470 3750 – 12500* 71.5 – 82.0* 375 – 1250* 51.5 – 62.0* above 470 12500 82.0 1250 62.0 *- Linear interpolation with frequency, f, in MHz: For 130-174 MHz: Field Strength (µV/m) = (56.82 x f) – 6136 For 260-470 MHz: Field Strength (µV/m) = (41.67 x f) – 7083 Note 1: The above field strength limits are specified at a distance of 3 meters. The tighter limits apply at the band edges. The limits on the field strength of the spurious emissions in the above table are based on the fundamental frequency of the intentional radiator. Spurious emissions shall be attenuated to the average (or, alternatively, CISPR quasi-peak) limits shown in this table or to the general limits shown in §15.209, whichever limit permits a higher field strength. Frequency, f Field strength (MHz) (dBµV/m) 0.009 – 0.490 (20*log(2400/f (kHz))) + 40 dB 0.490 – 1.705 (20*log(24000/f (kHz))) + 20 dB 1.705 – 30.0 49.5 30 – 88 40.0 88 – 216 43.5 216 – 960 46.0 above 960 54.0 Note 1: The above field strength limits are specified at a distance of 3 meters. The tighter limits apply at the band edges. Note 2: The emissions limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 19 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Unwanted emissions that fall into the restricted bands specified on the table below shall comply with the limits specified on the table limits above as per §15.209 and Clause 8.9 of RSS-Gen. FCC Restricted Bands: IC/RSS Restricted Bands: Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 20 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Method of Measurement: The EUT was tested in our 3 m SAC and was positioned on the center of the turntable. The transmitter was set for continuous transmission. The operating frequency of the device was measured for all radiated emissions 10 kHz to 6 GHz up to the 10th harmonic of the highest fundamental frequency. The EUT was pre-scanned in 3 different orthogonal orientations and was found to radiate highest when placed flat on the table top as indicated in the test photos. Transmission is generated once button is pressed. Since this involved human intervention in the SAC, EUT with Continuous Wave (CW) was tested, and Duty Cycle Correction Facture (DDCF) as per 4.4 was applied to calculate results for modulated transmission. Modifications: No modification was required to comply for this test. Result: The EUT complies with the applicable standard. Data/Plot: 1 – 30 MHz: Level in dBµV/m Plot 3: Radiated Emissions (1-30M Hz) – Vertical Pol. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 21 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Level in dBµV/m Plot 4: Radiated Emissions (1-30M Hz) – Parallel Pol. Note: No emissions found within 20 dB margin of limit line. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 22 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 30 MHz – 1 GHz: Level in dBµV/m Plot 5: Radiated Emissions (30MHz-1GHz) scanned at 3m SAC Frequency QuasiPea DCCF DCCF_Corrected Limit Margin Meas. Bandwidt Height Pol Azimu Corr. (MHz) k (dB) QuasiPeak (dBµV/ (dB) Time h (cm) th (dB) (dBµV/m) (dBuV/m) m) (ms) (kHz) (deg) 30.958441 22.89 - - 40.00 17.23 1000.0 120.000 104.0 H 325.0 26.5 75.314200 13.53 - - 40.00 16.47 1000.0 120.000 183.0 H 68.0 15.7 639.003650 45.25 21.63 23.62 46.00 22.38 1000.0 120.000 98.0 V 160.0 30.4 909.058900 31.40 - - 46.00 14.60 1000.0 120.000 188.0 V 203.0 34.0 958.492000 42.64 21.63 21.01 46.00 24.99 1000.0 120.000 97.0 H 177.0 34.8 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 23 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 1 – 6 GHz: Level in dBµV/m Plot 6: Radiated Emissions (1GHz-6GHz) scanned at 3m SAC Frequency MaxPe Average DCCF DCCF- Limit Margin Meas. Band Height Pol Azimuth Corr. (MHz) ak (dBµV/m) (dB) corrected (dBµV/m) (dB) Time width (cm) (deg) (dB) (dBµV/ Results (ms) (kHz) m) (dBuV/m) 21.63 2875.508400 --- 53.62 31.99 54.00 22.01 1000.0 1000 135.0 H 350.0 1.4 21.63 3195.013600 --- 55.85 34.22 54.00 19.78 1000.0 1000 135.0 H 350.0 1.5 21.63 4153.512800 --- 58.95 37.32 54.00 16.68 1000.0 1000 135.0 H 350.0 4.8 21.63 4153.515600 63.46 --- 41.83 74.00 32.17 1000.0 1000 135.0 H 350.0 4.8 Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 24 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada 3.7 Receiver Radiated Emissions Date Performed: March 28, 2019 Test Standard: o RSS-Gen Issue 5, 7.1 Test Method: o ANSI C63.4-2014 Required Limit(s): Spurious emissions from receivers shall not exceed the radiated limits shown below Frequency, f Field strength (MHz) (dBµV/m) 30 – 88 40.0 88 – 216 43.5 216 – 960 46.0 above 960 54.0 Note 1: The above field strength limits are specified at a distance of 3 meters. The tighter limits apply at the band edges. Method of Measurement: The EUT was tested in our 3 m SAC and was positioned on the center of the turntable. The transmitter was set for continuous transmission. The device was measured for all radiated emissions from 30 MHz to 3 GHz. The EUT was pre-scanned in 3 different orthogonal orientations and was found to radiate highest when placed flat on the table top as indicated in the test photos. Modifications: No modification was required to comply for this test. Result: The EUT complies with the applicable standard. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 25 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Data/Plot: Level in dBµV/m Plot 7: Radiated Emissions scanned at 3m SAC – for reference only Observation 1: In “receive mode” no emissions were observed above noise floor. Observation 2: 2.4 GHz signal was determined to be ambient and not of the EUT. Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 26 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Appendix A: TEST SETUP PHOTOS Figure 1: SAC Radiated Spurious Emissions (30 MHz – 1 GHz) at 3m Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 27 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Figure 2: SAC Radiated Spurious Emissions (1 - 30 MHz) at 3m Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 28 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Figure 3: SAC Radiated Spurious Emissions (1-18 GHz) at 3m Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 29 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Figure 4: SAC Radiated Spurious Emissions – Encased EUT on turntable Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 30 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Figure 5: SAC Radiated Spurious Emissions – EUT w/o casing on turntable Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 31 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada Appendix B: ABBREVIATIONS Abbreviation Definition AC Alternating Current AM Amplitude Modulation CE European Conformity CISPR Comité International Spécial des Perturbations Radioélectriques DC Direct Current EFT Electrical Fast Transient EMC ElectroMagnetic Compatibility EMI ElectroMagnetic Interference ESD ElectroStatic Discharge EUT Equipment Under Test FCC Federal Communications Commission IC Industry Canada ICES Interference Causing Equipment Standard IEC International Electrotechnical Commission LISN Line Impedance Stabilizing Network OATS Open Area Test Site RF Radio Frequency RMS Root-Mean-Square SAC Semi-Anechoic Chamber Client: Versa Wireless Report Number: E10676-1901_VersaWireless_KFG_Rev1.2 Page 32 of 33

QAI Laboratories 3980 North Fraser Way Burnaby, BC, V5J 5K5 Canada END OF REPORT


Document Created: 2019-08-15 13:30:29
Document Modified: 2019-08-15 13:30:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC