Test Report DXX

FCC ID: 2AD9PA-A80030PRC

Test Report

Download: PDF
FCCID_4045262

S T RADIO TEST REPORT Report No:STS1806172W06 S Issued for Prentke Romich Company 1022 Heyl Rd. wooster, Ohio 44691, United States Product Name: Accent 800 L Brand Name: Model Name: Accent ACN800-30 A Series Model: FCC ID: N/A 2AD9PA-A80030PRC IC ID: 23408-ACN80030 B Test Standard: FCC Part 15.225 RSS 210 Issue 9 Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. Shenzhen STS Test Services Co., Ltd. 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, Guangdong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:sts@stsapp.com

Page 2 of 28 Report No.: STS1806172W06 TEST REPORT CERTIFICATION Applicant’s name ................. : Prentke Romich Company Address .................................. : 1022 Heyl Rd. wooster, Ohio 44691, United States Manufacture's Name ............ : Prentke Romich Company Address .................................. : 1022 Heyl Rd. wooster, Ohio 44691, United States Product description Product Name ........................ : Accent 800 Brand Name ......................... : Accent Model Name........................... : ACN800-30 Series Model .......................... : N/A Test Standards ..................... : FCC Part15.225 RSS 210 Issue 9 Test procedure ...............................ANSI : C63.10: 2013,ANSI C63.4: 2014 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC&IC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, thidocument only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................................: Date (s) of performance of tests..............: 28 June 2018 ~10 July 2018 Date of Issue ...........................................: 13 July 2018 Test Result ...............................................: Pass Testing Engineer : ( Chris chen ) Technical Manager : ( Sean she ) Authorized Signatory : (Vita Li)

Page 3 of 28 Report No.: STS1806172W06 TABLE OF CONTENTS Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 2. GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 DESCRIPTION OF TEST MODES 7 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 7 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 8 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 9 3. EMC EMISSION TEST 10 3.1 CONDUCTED EMISSION MEASUREMENT 10 3.2 TEST PROCEDURE 11 3.3 TEST SETUP 11 3.4 EUT OPERATING CONDITIONS 11 3.5 TEST RESULTS 12 4. RADIATED EMISSION MEASUREMENT 14 4.1 RADIATED EMISSION LIMITS 14 4.2 TEST PROCEDURE 16 4.3 TEST SETUP 17 4.4 EUT OPERATING CONDITIONS 17 5. FREQUENCY TOLERANCE 22 5.1 REQUIREMENT 22 5.2 TEST PROCEDURE 22 5.3 TEST SETUP 22 5.4 EUT OPERATION CONDITIONS 22 5.5 TEST RESULTS 23 6. 20DB BANDWIDTH 24 6.1 APPLIED PROCEDURES / LIMIT 24 6.2 TEST PROCEDURE 24 6.3 TEST SETUP 24 6.4 EUT OPERATION CONDITIONS 24 6.5 TEST RESULTS 25

Page 4 of 28 Report No.: STS1806172W06 TABLE OF CONTENTS Page 7. ANTENNA REQUIREMENT 26 7.1 STANDARD REQUIREMENT 26 7.2 EUT ANTENNA 26 APPENDIX 1- PHOTOS OF TEST SETUP 27

Page 5 of 28 Report No.: STS1806172W06 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 15.225 , Subpart C/ RSS 210 Issue 9 Standard Test Item Judgment Remark Section 15.207 Conducted Emission PASS -- RSS-Gen Issue 4 (8.8) 15.209 15.225(a)(b)(c)(d) Radiated Emission PASS -- RSS 210 Issue 9 (B.6) 15.225(e) Frequency Tolerance PASS -- RSS 210 Issue 9 (B.6) 15.203 Antenna Requirement PASS -- RSS-Gen Issue 4 15.215 20dB&99% Bandwidth PASS -- RSS-Gen Issue 4 NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) All tests are according to ANSI C63.4-2014 and ANSI C63.10-2013 1.1 TEST FACTORY Shenzhen STS Test Services Co., Ltd. 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, Guangdong, China CNAS Registration No.: L7649; FCC Registration No.: 625569 IC Registration No.: 12108A; A2LA Certificate No.: 4338.01; 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission (9KHz-150KHz) ±2.88dB 2 Conducted Emission (150KHz-30MHz) ±2.67dB 3 RF power,conducted ±0.71dB 4 Spurious emissions,conducted ±0.63dB 5 All emissions,radiated (9KHz-30MHz) ±3.02dB 6 All emissions,radiated (30MHz-200MHz) ±3.80dB 7 All emissions,radiated (200MHz-1000MHz) ±3.97dB

Page 6 of 28 Report No.: STS1806172W06 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name Accent 800 Trade Name Accent Model Name ACN800-30 Serial Model N/A Model Difference N/A The EUT is a Accent 800 Operation Frequency: 13.56MHz Product Description Modulation Type: FSK Antenna Designation: Please see Note 3. Antenna Gain (dBi) 0 dbi Power supply and ADP(rating): Adapter Input: AC 100V-240V, 50/60Hz, 1500mA Output: DC 18V, 3330mA Battery(rating): Rated Voltage: 7.6V Battery Charge Limit: 8.7V Capacity: 6000mAh Hardware version number Ver C Software version number Windows 10 Pro 64-bit Connecting I/O Port(s) Please refer to the User's Manual Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Table for filed Antenna Ant. Brand Model Name Antenna Type Connector Gain (dBi) NOTE A Accent ACN800-30 PIFA Antenna N/A 0dBi ANT.

Page 7 of 28 Report No.: STS1806172W06 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 TX Mode For Conducted Test Final Test Mode Description Mode 1 TX Mode For Radiated Emission Final Test Mode Description Mode 1 TX Mode 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED AC C-1 Plug E-2 E-1 Adapter EUT

Page 8 of 28 Report No.: STS1806172W06 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Mfr/Brand Model/Type No. Series No. Note E-2 Adapter MEGMEET MANGO60S N/A N/A Item Shielded Type Ferrite Core Length Note C-1 DC Cable NO 100cm N/A Note: (1)The support equipment was authorized by Declaration of Confirmation. (2)For detachable type I/O cable should be specified the length in cm in『Length』column.

Page 9 of 28 Report No.: STS1806172W06 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS Radiation Test equipment Kind of Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until EMI Test Receiver R&S ESCI 102086 2017.10.15 2018.10.14 Bilog Antenna TESEQ CBL6111D 34678 2017.11.02 2018.11.01 BBHA 9120D Horn Antenna Schwarzbeck 9120D-1343 2017.10.27 2018.10.26 (1201) Passive Loop ZHNAN ZN3090C 16035 2018.03.11 2019.03.10 (9K--30MHz) Pre-mplifier EM EM330 60538 2018.03.11 2019.03.10 (0.1M-3GHz) PreAmplifier Agilent 8449B 60538 2017.10.15 2018.10.14 USB RF power DARE RPR3006W 15I00041SNO03 2017.10.15 2018.10.14 sensor Semi-anechoic Changling 966 N/A 2017.10.15 2018.10.14 chamber Conduction Test equipment Kind of Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until Test Receiver R&S ESCI 101427 2017.10.15 2018.10.14 LISN R&S ENV216 101242 2017.10.15 2018.10.14 conduction Cable EM C01 N/A 2018.03.11 2019.03.10 Temperature & Mieo HH660 N/A 2017.10.15 2018.10.14 Humitidy

Page 10 of 28 Report No.: STS1806172W06 3. EMC EMISSION TEST 3.1 CONDUCTED EMISSION MEASUREMENT 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS Operating frequency band. In case the emission fall within the restricted band specified on Part 15. 207(a)& RSS-Gen Issue 4 (8.8) limit in the table below has to be followed. Class B (dBuV) FREQUENCY (MHz) Standard Quasi-peak Average 0.15 -0.5 66 - 56 * 56 - 46 * CISPR 0.50 -5.0 56.00 46.00 CISPR 5.0 -30.0 60.00 50.00 CISPR 0.15 -0.5 66 - 56 * 56 - 46 * FCC 0.50 -5.0 56.00 46.00 FCC 5.0 -30.0 60.00 50.00 FCC Note: (1) The tighter limit applies at the band edges. (2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Setting Attenuation 10 dB Start Frequency 0.15 MHz Stop Frequency 30 MHz IF Bandwidth 9 kHz

Page 11 of 28 Report No.: STS1806172W06 3.2 TEST PROCEDURE a.The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b.Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c.I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d.LISN at least 80 cm from nearest part of EUT chassis. e.For the actual test configuration, please refer to the related Item –EUT Test Photos. 3.3 TEST SETUP Vertical Reference Ground Plane Test Receiver EUT 40cm 80cm LISN Horizontal Reference Ground Plane Note: 1.Support units were connected to second LISN. 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80 cm from other units and other metal planes support. units. 3.4 EUT OPERATING CONDITIONS The EUT was configured for testing in a typical fashion (as a customer would normally use it). The EUT has been programmed to continuously transmit during test. This operating condition was tested and used to collect the included data.

P aas. I tams \— Page 12 of 28 Report No.: STS1806172W06 3.5 TEST RESULTS Temperature: 283 °C Relative Humidity: 61% Test Voltage: AC 120V/60H2z Phase: L Test Mode: Mode 1 Frequency Reading Correct Resutt Limit Margin 3 p emar (MHz) (dBuV) Factor(dB) (dBuV) (dBuV) (dB) 0.1540 49.75 9.79 59.54 65.78 —6.24 aP 0.1540 26.82 9.79 36.61 55.78 —19.17 AVG 0.2220 40.19 9.88 50.07 62.74 —12.67 aP 0.2220 26.30 9.88 36.18 52.74 —16.56 AVG 0.5540 35.89 9.98 45.87 56.00 —10.13 aP 0.5540 31.76 9.98 41.74 46.00 ~4.26 AVG 0.6100 34.88 9.93 44.81 56.00 1119 aP 0.6100 31.55 9.93 41.48 46.00 —4.52 AVG 1.6060 28.42 9.79 38.21 56.00 —17.79 aP 1.6060 21.19 9.79 30.98 46.00 —15.02 AVG 19.4900 30.39 10.44 40.83 60.00 —19.17 aP 19.4900 21.58 10.44 32.02 50.00 —17.98 AVG Remark: 1. All readings are Quasi—Peak and Average values. 2. Margin = Result (Result =Reading + Factor )—Limit 100.0 dBu¥ Limit1: — Limit2: — I— 50 J ¢ 7 | peak AVG 0.0 0.150 0.5 (MHz) 5 30.000 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Faxc+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

P mu» I mmme 3 Temperature: 28 °C Relative Humidity: 61% Test Voltage: AC 120V/60H2z Phase: N Test Mode: Mode 1 Frequency Reading Correct Resutt Limit Margin Remark (MHz) (dBuV) Factor(dB) (dBuV) (dBuV) (dB) 0.1580 43.46 9.77 53.23 65.57 —12.34 aP 0.1580 21.62 9.77 31.39 55.57 —24.18 AVG 0.2220 36.40 9.96 46.36 62.74 —16.38 aP 0.2220 2143 9.96 31.39 52.74 —21.35 AVG 0.5540 33.03 9.95 42.98 56.00 —13.02 aP 0.5540 28.94 9.95 38.89 46.00 —7.11 AVG 0.6100 34.27 9.91 44.18 56.00 —11.82 aP 0.6100 30.71 9.91 40.62 46.00 —5.38 AVG 1.6140 29.44 9.84 39.28 56.00 —16.72 aP 1.6140 21.30 9.84 31.14 46.00 —14.86 AVG 19.7260 27.10 10.45 37.55 60.00 —22.45 aP 19.7260 18.13 10.45 28.58 50.00 —21 42 AVG Remark: 1. All readings are Quasi—Peak and Average values. 2. Margin = Result (Result =Reading + Factor )—Limit 100.0 dBu¥ Limi1: — Limit2: — po———————————— \ 50\ 5 . AVG 0.0 0.150 [MHz] 5 30.000 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Faxc+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

) / Page 14 of 28 Report No.: STS1806172WW06 4. RADIATED EMISSION MEASUREMENT 4.1 RADIATED EMISSION LIMITS FCC: (a) The field strength of any emissions within the band 13.553—13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410—13.553 MHz and 13.567—13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110—13.410 MHz and 13.710—14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110—14.010 MHz band shall not exceed the general radiated emission limits in §15.209. (Radiated Emission <30MHz (9KHz—30MHz, H—field) According to FCC section 15.225, for <30MHz, Radiated emissions were measured according to ANSIC63.4. The EUT was set to transmit at the highest output power. The EUT was set 30 meter away from the measuring antenna. The loop antenna was positioned 1 meter above the ground from the center of the loop. The measuring bandwidth was set to 10KHz. (Note: During testing the receive antenna was rotated about its axis to maximize the emission from the EUT) There was no detected Restricted bands and Radiated suprious emission below 3OMHz. The 3O0m limit was converted to 3m Limit using square factor(x) as it was found by measurements as follows; 3 m Limit(dBuV/m) = 20log(X)+4010g(30/3)= 20log(15,848)+4010g(30/3) =124dBuV ie 0nc t 3 m Limit(dBuV/m) = 20log(X)+4010g(30/3)= 20l0g(334)+4010g(30/3) =90.47dBuV 3 m Limit(dBuV/m) = 20log(X)+40l0g(30/3)= 20log(106)+4010g(30/3) =80.506dBuV 3 m Limit(dBuV/m) = 20log(X)+4010g(30/3)= 20l0g(30)+4010g(30/3) =69.54dBuV Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: LIMITS OF RADIATED EMISSION MEASUREMENT (Frequency Range 9kHz—1000MHz) Field Strength@30m Field Strength@3m Frequency range (MHz) pV/m dBuV/m dBuV/m Below 13.110 30 29.5 69.5 13.110 ~13.410 106 40.5 80.5 13.410 ~ 13.553 334 50.5 90.5 13.553 ~18.567 15.848 84 105.4 13.567 ~13.710 334 50.5 90.5 13.710 ~14.010 106 40.5 80.5 Above 14.010 30 29.5 69.5 NOTE: a) Field Strength (dBuV/m) = 20*log[Field Strength (uV/m)]. b) In the emission tables above, the tighter limit applies at the Band edge. Radiated Emission >30MHz (30MHz—1GHz, E—field) According to FCC section 15.205, the field strength of radiated emissions from intentiona radiators at a distance of 3 meters shall not exceed the following values: 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services CO. Ltd Tel: + 86—785 3688 6288 Fax+ 86—755 3688 6277 Http://www.stsapp.com E—mail: sts@stsapp.com

Page 15 of 28 Report No.: STS1806172W06 Frequencies Field Strength Measurement Distance (MHz) (micorvolts/meter) (meters) 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 IC : In case the emission fall within the restricted band specified on RSS-Gen Issue 4, and Part RSS 210 Issue 9 (B.6) limit in the table below has to be followed. LIMITS OF RADIATED EMISSION MEASUREMENT (0.009MHz - 1000MHz) Frequencies Field Strength Measurement Distance (MHz) (micorvolts/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 LIMITS OF FIELD STRENGTHS MEASUREMENT The field strength of any emission shall not exceed the following limits: a. 15848mV/m (84dBμV/m) at 30m, within the band 13.553-13.567MHz; b. 334µV/m (50.5dBμV/m) at 30m, within the bands 13.410-13.553MHz and 13.567-13.710MHz; c. 106µV/m (40.5dBμV/m) at 30m, within the bands 13.110-13.410MHz and 13.710-14.010MHz; d. and RSS-Gen general field strength limits for frequencies outside the band 13.110-14.010MHz. LIMITS OF RADIATED EMISSION MEASUREMENT (Above 1000MHz) Class B (dBuV/m) (at 3M) FREQUENCY (MHz) PEAK AVERAGE Above 1000 74 54 NOTE: (1)The limit for radiated test was performed according to RSS 210 Issue 9 (2)Emission level (dBuV/m)=20log Emission level (uV/m).

Page 16 of 28 Report No.: STS1806172W06 Spectrum Parameter Setting Detector Peak Attenuation Auto Start Frequency 1000 MHz Stop Frequency 10th carrier harmonic RB / VB (emission in restricted band) 1 MHz / 3 MHz Receiver Parameter Setting Attenuation Auto Start ~ Stop Frequency 9kHz~90kHz / RB 200Hz for PK & AV Start ~ Stop Frequency 90kHz~110kHz / RB 200Hz for QP Start ~ Stop Frequency 110kHz~490kHz / RB 200Hz for PK & AV Start ~ Stop Frequency 490kHz~30MHz / RB 9kHz for QP Start ~ Stop Frequency 30MHz~1000MHz / RB 120kHz for QP 4.2 TEST PROCEDURE a. The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from the Test Antenna, which is mounted on a variable-height antenna master tower. For the test Antenna b. In the frequency range of 9KHz to 30MHz, magnetic field is measured with Loop Test Antenna. The Test Antenna is positioned with its plane vertical at 1m distance from the EUT. The center of the Loop Test Antenna is 1m above the ground. During the measurement the Loop Test Antenna rotates about its vertical axis for maximum response at each azimuth about the EUT. c. In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. f. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. g. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. h. For the actual test configuration, please refer to the related Item –EUT Test Photos. NOTE: Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported

D 1 ua» \— Etaarace Report No.: STS1806172WW06 4.3 TEST SETUP (A) Radiated Emission Test—Up Frequency Below 30OMHz Loop Antenna EUT &—_—— Sm _z CC—I] |_ y J Spectrum Ground Plane Coaxial Cable Analyzer (B) Radiated Emission Test—Up Frequency 3OMHz~1GHz E mm j la— 3m —» Turntable i 1 a ~~~ 400 \ |EuT m to 4m t Spectrum IO'Sm & Analyzer Ground Plane — Coaxial Cable 4.4 EUT OPERATING CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing. 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Fax+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

Page 18 of 28 Report No.: STS1806172W06 4.5 FIELD STRENGTH CALCULATION The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain and Duty Cycle Correction Factor (if any) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CL - AG Where FS = Field Strength CL = Cable Attenuation Factor (Cable Loss) RA = Reading Amplitude AG = Amplifier Gain AF = Antenna Factor For example Frequency FS RA AF CL AG Factor (MHz) (dBμV/m) (dBμV/m) (dB) (dB) (dB) (dB) 300 40 58.1 12.2 1.6 31.9 -18.1 Factor=AF+CL-AG

P \— Page 19 of 28 Report No.: STS1806172W06 4.6 TEST RESULTS (Radiated Emission<30MHz (9KHz—30MHz, H—field)) Temperature: 26.5 °CC Relative Humidtity: 68% Test Voltage: DC 7.6V Polarization: —— Test Mode: Mode 1 Note: Horizontal level have a test this is the worst. Freq. Reading Limit Margin Detector State (MHz) (dBuV/m) (dBuV/m) (dB) (PK/QP/AV) P/E 12.12 58.47 69.54 —11.07 aP PASS 13.38 60.24 80.51 —20.27 aP PASS 13.45 59.35 90.47 —31.12 aP PASS 13.56 97.62 124 —26.38 aP PASS 13.67 60.75 90.47 —29.72 aP PASS 13.89 60.83 80.51 —19.68 aP PASS 15.21 60.88 69.54 —8.66 aP PASS Note: 15.31(f)(2) f < 30 MHz, extrapolation factor of 40 dB/decade of distance 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Faxc+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

P \— Page 20 of 28 Report No.: STS1806172W06 Between 30—1000MHz Temperature: 25.5 °CC Relative Humidity: (62% Test Voltage: DC 7.6V Phase: Horizontal Test Mode: Mode 1 Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) 48.8430 51.47 —20.89 30.58 40.00 —9.42 aP 69.60083 50.11 —24.11 26.00 40.00 —14.00 aP 104.1701 45.31 —18.84 26.47 43.50 —17.03 aP 300.3672 46.24 —14.81 31.43 46.00 ~14.57 aP 552.8831 38.07 —6.71 31.36 46.00 —14.64 aP 996.4995 28.73 —0.09 28.64 54.00 —25.36 aP Remark: 1. Margin = Result (Result =Reading + Factor )—Limit 80.0 dBu¥/m Limit1: — Margin: — 40—|—| —I 4 5 G > 3 0.0 30.000 40 50 60 70 80 (MHz] 300 400 500 600 700 1000.000 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Faxc+ 86—755 3688 6277 Hitp://www.stsapp.com E~mail: sts@stsapp.com

P <25 Temperature: 25.5 °CC Relative Humidity: (62% Test Voltage: DC 7.6V Phase: Vertical Test Mode: Mode 1 Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) 38.7518 43.03 —15.68 27.35 40.00 —12.65 aP 67.4381 50.94 —24.16 26.78 40.00 —13.22 aP 104.1701 47.66 —18.84 28.82 43.50 —14.68 aP 175.0363 45.88 —19.38 26.50 43.50 —17.00 aP 400.4318 42.94 —11.22 31.72 46.00 —14.28 aP 965.5421 32.32 —0.14 32.18 54.00 —21.82 aP Remark: 1. Margin = Result (Result =Reading + Factor )—Limit 80.0 dBu¥/m Limit1: — Margin: — 40 0.0 30.000 40 50 60 70 80 (MHz) 300 400 500 600 700 1000.000 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: + 86—785 3688 6288 Faxc+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

Page 22 of 28 Report No.: STS1806172W06 5. FREQUENCY TOLERANCE 5.1 REQUIREMENT According to FCC section 15.225, the devices operating in the 13.553-13.567 MHz shall maintain the carrier frequency within 0.01% of the operating frequency over the temperature variation of -20°C to +50°C using an environmental chamber. The primary supply voltage is varied from 85% to 115% of the voltage normally at the input to the device or at the power supply terminals if cables are not normally supplied. IC: Carrier frequency stability shall be maintained to ±0.01% (±100 ppm) 5.2 TEST PROCEDURE According to FCC section 15.225(e),The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency over a temperature variation of −20 degrees to + 50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. IC: a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in the block diagram below. b. Spectrum Setting : RBW= 10KHz, VBW=30KHz, Sweep time = Auto. 5.3 TEST SETUP The EUT which is powered by the Battery, is coupled to the Spectrum Analyzer; the RF load attached to the EUT antenna terminal is 50Ohm; the path loss as the factor is calibrated to correct the reading. 5.4 EUT OPERATION CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing.

P \— Page 23 of 28 Report No.: STS1806172W06 5.5 TEST RESULTS Temperature: 25 °C Relative Humidity: 150% Test Voltage: DC 7.6V Test Mode: TX Mode 13.56MHz Test Conditions VOLTAGE(%) Power Temperature Frequency(Hz) Deviation(%) Limit Verdict (VDC) (°C) 100 +20°C(Ref) 13560751 0.00554 £0.01% 100 —30 13560751 0.00554 £0.01% 100 —20 13560754 0.00556 £0.01% 100 —10 13560751 0.00554 £0.01% 100 0 13560754 0.00556 £0.01% 100 7.6 10 13560751 0.00554 £0.01% 100 20 13560753 0.00555 £0.01% pass 100 25 13560751 0.00554 £0.01% 100 30 13560750 0.00553 £0.01% 100 40 13560753 0.00555 £0.01% 100 50 13560751 0.00554 £0.01% BattoryEd g.g4 20 13560751 0.00554 +0.01% 115 8.36 20 13560751 0.00554 £0.01% Shenzhen STS Test Seerces (:0Y Ltd L Tel " 86—755 3688 6288 Faxi+ 86—755 3688‘ 6277 Hitp ww‘w stsapp.com E—mail: sts( ‘s\sapp com ‘

Page 24 of 28 Report No.: STS1806172W06 6. 20DB BANDWIDTH 6.1 APPLIED PROCEDURES / LIMIT the bandwidth should be contained within the frequency band designated in the rule section under which the EUT is operated, it was measured with a spectrum analyzer connected the EUT while the EUT is operating in transmission mode. 6.2 TEST PROCEDURE Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §13.553-13.567 MHz and in subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. In the case of intentional radiators operating under the provisions of subpart E, the emission bandwidth may span across multiple contiguous frequency bands identified in that subpart. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If a frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80% of the permitted band in order to minimize the possibility of out-of-band operation. 1. Set RBW = 1 kHz. 2. Set the video Mobile Phonewidth (VBW) ≥ 3 RBW. 3. Detector = Peak. 4. Trace mode = max hold. 5. Sweep = auto couple. 6. Allow the trace to stabilize. 7.Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 d B relative to the maximum level measured in the fundamental emission. 6.3 TEST SETUP 6.4 EUT OPERATION CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing.

P / ee es Report No.: STS1806172W06 6.5 TEST RESULTS Temperature: 25 °C Relative Humidity: |160% Test Voltage: DC 7.6V Test Mode: TX Mode 13.56MH Cente Measurement Frequency 200B Bandwidth 99% Bandwidth (KH2) (KHz) Frequency Range (MHz) 13.56MHz 14.75 2.575 13.553—13.567 aliouauro orsecorhuto aore Frequency Genter Freq: 13.560000 MHz Radio Std: None >‘ Trig: Free Run AvglHl: tort #1EGainL ow #Atten: 10 dB Radio Device: 8TS 0 dBidiv Ref 20.00 dBm o9 100 CenterFi uc 13560000 100 z0 zo o o o 700 CF Step 13.56 MHz Span 50 £00 i BW 1 kHz RVBW 1 kHz Sweep 77.87 Occupied Bandwidth Freq 2.575 kHz 0 Transmit Freq Error +215 Hz OBW Power 99.00 % x dB Bandwidth 14.75 kHz x dB —20.00 dB 1/F., Building B, Zhuoke Science Park, No.190, Chongging Road, Fuyong Street, Bav‘an District, Shenzhen, Guangdong, China Shenzhen STS Test Services Co., Ltd. Tel: +86—755 3688 6288 Fax:+ 86—755 3688 6277 Hitp://www.stsapp.com E—mail: sts@stsapp.com

Page 26 of 28 Report No.: STS1806172W06 7. ANTENNA REQUIREMENT 7.1 STANDARD REQUIREMENT 15.203& RSS-Gen Issue 4 requirement: For intentional device, according to 15.203& RSS-Gen Issue 4: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 7.2 EUT ANTENNA The EUT antenna is PIFA Antenna. It comply with the standard requirement.

Page 27 of 28 Report No.: STS1806172W06 APPENDIX 1- PHOTOS OF TEST SETUP Conduction Measurement Photos Radiated Measurement Photos

comm <omm mm ' muuar \— CEe Report No.: STS1806172W/06 d rivofm XX X X X END OF THE REPORT K X X K 1/F.,, Building B, Zhuoke Science Park, No.190, Chongaing Road, Fuyong Street, Bac‘an District, Shenzhen, Guangdong, China Tel: +86—755 3688 6288 Fax:+ 86—756 3688 6277. Hitp://www.stsapp.com E—mail: sts@stsapp.com Shenzhen STS Test Services Co., Ltd. 4‘


Document Created: 2018-07-16 08:15:30
Document Modified: 2018-07-16 08:15:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC