RF EXPOSURE REPORT

FCC ID: 2AD37JUPW1W

RF Exposure Info

Download: PDF
FCCID_4089518

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 RF Exposure Report Applicant : kaiJet Technology International Corporation 8F., No 109, Zhongcheng Rd., Tucheng Dist., New Taipei City 236, Address : Taiwan R.O.C. Equipment : mightywave wood 10W Wireless Fast Charger Model No. : JUPW1101W Trademark : j5 create FCC ID : 2AD37JUPW1W I HEREBY CERTIFY THAT : The sample was received on Oct. 16, 2018 and the test items were conducted during Nov. 15, 2018 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Tested by: Mark Liao / Assistant Manager Amos Zhang / Engineer Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory TAF LAB Code: 1439 Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 1 of 6

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 CONTENTS 1. Summary Of Standards And Results ........................................................................................................ 3 1.1. Measuring Standard .................................................................................................................................. 3 1.2. Requirements ............................................................................................................................................ 3 1.3. Typical test Setup ...................................................................................................................................... 4 1.4. Specification Limits.................................................................................................................................... 4 1.5. Test Equipment List and Details................................................................................................................ 5 1.6. Test Result ................................................................................................................................................ 5 1.7. Photographs of test setup ......................................................................................................................... 6 Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 2 of 6

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 1. Summary Of Standards And Results 1.1. Measuring Standard The EUT have been tested according to the applicable standards as referenced below: Test Item Normative References Remarks FCC CFR 47 part1, 1.1310 RF Exposure PASS KDB680106 D01v03 1.2. Requirements According to the item 5 of KDB 680106 D01v03: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. a) Power transfer frequency is less that 1 MHz b) Output power from each primary coil is less than or equal to 15 watts c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is inserted in or placed directly in contact with the transmitter e) Mobile exposure conditions only(portable exposure conditions are not covered by this exclusion). f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit.. Remark: Meet all the above requirements. Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 3 of 6

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 1.3. Typical test Setup 1.4. Specification Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 4 of 6

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 1.5. Test Equipment List and Details Instrument Manufacturer Model No Serial No Calibration Date Valid Date EMIF Tester Narda ELT-400 G-0041 2018/01/16 2019/01/15 1.6. Test Result Electric Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency Test Test result(v/m) Limit (v/m) Range Position (MHz) 0.11~0.205 A: Front 0.431 614.00 0.11~0.205 B: Back 0.412 614.00 0.11~0.205 C: Left 0.422 614.00 0.11~0.205 D: Right 0.428 614.00 0.11~0.205 E: Top 0.430 614.00 0.11~0.205 F: Bottom 0.437 614.00 Magnetic Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency Test Test result(A/m) Limit (A/m) Range Position (MHz) 0.11~0.205 A: Front 0.435 1.63 0.11~0.205 B: Back 0.417 1.63 0.11~0.205 C: Left 0.424 1.63 0.11~0.205 D: Right 0.429 1.63 0.11~0.205 E: Top 0.436 1.63 0.11~0.205 F: Bottom 0.446 1.63 Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 5 of 6

CERPASS TECHNOLOGY CORP. Report No.: TEFU1810144 1.7. Photographs of test setup Cerpass Technology Corp. Issued Date : Nov. 15, 2018 Page No. : 6 of 6


Document Created: 2018-11-21 19:31:07
Document Modified: 2018-11-21 19:31:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC