Modular approval request letter

FCC ID: 2ACY5ST8

Cover Letter(s)

Download: PDF
FCCID_4201460

FCC Modular Approval Statement Receiver Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: SportIQ Modular Approval Statement Date: 2019-03-12 FCC Certification Number: 2ACY5ST8 Model Name/Number: ST008 TO WHOM IT MAY CONCERN Pursuant to Paragraphs CFR § 15.212, we herewith declare for our module. Modular approval requirement Yes No * (a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, No but must be on the module assembly. *Please provide a detailed explanation if the answer is “No.”: The modular without shielded. (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable standard under conditions of excessive data rates or over- Yes modulation. *Please provide a detailed explanation if the answer is “No.”: (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in Yes the host device which houses the module. *Please provide a detailed explanation if the answer is “No.”: (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will Yes be used with the module. *Please provide a detailed explanation if the answer is “No.”: (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device Yes during testing. *Please provide a detailed explanation if the answer is “No.”: (f) The module shall comply with labeling requirements and CFR § Yes 15.212(a)(1)(vi). *Please provide a detailed explanation if the answer is “No.”: 1

FCC Modular Approval Statement (g) The module shall comply with applicable FCC RF exposure requirement which are based on the intended use/configurations. Yes *Please provide a detailed explanation if the answer is “No.”: (i) The modular transmitter complies with all applicable FCC rules. Instructions Yes for maintaining compliance are given in the user instructions. If you have any questions, please feel free to contact us at the address shown below Best Regards, ______________________ Name / Title: HARRI K HOHTERI / CEO Company: SportIQ Address: Jauhokuja 3, 00920 Helsinki, Finland Phone: +358401623040 Fax: / E-Mail: harri.hohteri@sportiq.xyz 2


Document Created: 0500-09-07 00:00:00
Document Modified: 0500-09-07 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC