User Manual

FCC ID: 2ACS628TX

Users Manual

Download: PDF
FCCID_4035706

@Lefont Model: 66097 DRONE FIGHTER Features * Infrared Combat Mode ase12+ Infrared RC Battle Drone + SheAxis Gyro + Auto—hovering feature + USB charging SideTim Movement Trm teft «/ Package Contents oward / nght> * Drone (2) + Remote Control (2) One button ‘heer Single fi + USB Charging Cable (2) + Spare Propellers (4) take off/landing a l;l:lgtif)I:E/ve + User‘s Guide + Screwdriver Specifications Throttle <s Steering Power Drone 37V lithium polymer battery Asci"d Forward Remote Control. 4 x AAA batteries Control Distance Tum ush Turn Move Push Move Specifications are subject to change and left * Bomh * right feft . (High/low s rigny without notice. Actual product may vary from the speed) Lithium Battery Notes t images found in this document. Your drone uses a built—inlithium polymer battery for power. Descend Backward Follow theinstructions for charging. Fly Safely «When flying outdoors, keep the drone away from «Do not charge longer than recommended. Unplug the charging OFF/ON power lines, trees, water, and other obstacles. cablewhen the drone is charged. «When flying indoors, keep the drone away from walls, «Do not puncture or crush. Do not disassemble. air conditioning, air vents, fans, breakable objects, and "Do not dispose oflithium batteries in the trash. other obstacles. "If the electrolyte in the celshould get on your skin, thoroughly Pairing «Do not fly the drone near or at other people or animals. wash with soap and water.If in the eyes, rinse thoroughly with Switch on and pair one drone and remote control at a time. «Keep eyes, hands, hai, and loose clothing away from cool water Immediately seek medical attention. 1.Turn on the drone. The drone‘s LEDs flash. moving propellers. *Do not attempt to charge or operate damaged toys. 2.Place the drone on level ground. + Adult supervision is recommended at all times. 3.Turn on the remote control. The remote control‘ LED flashes. Install Batteries in the Remote Control 4.Move the throttle all the way up and then down to pair the remote control with the drone. The drone‘s Charge the Drone 1.On the remote control, set the ON/OFF switch to OFF propellers remain still during pairing. When paired, the LEDs on both the remote control and dronelight 1.5et the drone‘s ON/OFF switch to OFF . steadily. Noteilf pairing fails, turn off the droneand remote control and repe at the steps above, or change locations to ON/OFF avoid interference. CHG Fly Your Drone 1.After pairing, press the steering control to switch between high speed (double beep) and low speed LED (single beep). 2 Press the (@is) button or push the throttle up , the drone will take off and hover.forward to fly. The drone adjusts itself automatically and fls stably. 3. To land your drone, press the (a) button or slowly move the throttle backward to descend Avoid moving 2.Connect the included USB charging cable to the 2.Use a screwdriver to open the twin battery compartments. the throttle too quickly, as that can stop the blades instantly and cause the drone to crash. drone‘s CHG jack and a USB power source. The USB Then insert four AAA batteries (not included), matching the 4.When youfinish playing, disconnect and remove the drone battery and turn off the transmitter. connector LED lights red during charging, and turns polarities (+ and —) marked inside. Replace the cover. off when charging is compoete. A full charge takes Note:If the remote control‘s LED flasher during use, the batteries about 50 minutes, and gives you up to 5 minutes are low and should be replaced. Trim Your Drone fight time. Move the throttle forward and see how the drone reacts. 3.After charging, unplug the charging cable. Battery Notes Reverse/ Forward Movement Trim: If the drone tends to move forward, press » ; «Dispose of old batteries promptly and properly. Do not bun or bury if it tends to move backward, press « . caution them Use only fresh batteries of the required size and recommended type. «se only the included USB charging cable to charge Do not mix ole and new batteries different types of batteries (standard, Left/Right Slide Trim: If the drone tends to slide right, press +; the drone‘s battery. Other cables may damage the alkaline, or rechargeable}, o rechargeable batteries of different capacities. if it tends to slide left, press » . drone. «Remove batteries during longer storage periods. Batteries can leak Note: The remote control beeps when you press a trim control, but stops beeping when you reach maximum +Always lt the drone battery cool before recharging. chemicals that can damage electronic parts. trim adjustment. ; Perform Stunts 1.Use the throttle and steering controls to fly and hover close. Drone difficult to control CAUTION: Make sure there is enough space for the When within 16 ft of your opponent, level to fire. "The throttle control is very sensitive. Use small,fine movements to control. drone to perform stunts without crashing into objects «Press A/ito shoot single fire. «Propellers maybe bent. Adjust propellers by hand. If you cannot adjust them, replace with the spare propellers. or people. «Press and hold on A/% for a rapid volley. «Practice in low speed mode. See "Fly Your Drone." 1.Push the throttle control to activate stunt mode. The 2When your droneis hit, the LEDs blink and the drone shakes +The gyroscope inside your drone may need calibrating: remote control beeps repeatedly. and spins 360°. «After receiving a third hit, the casualty drone will automatically Calibrate Your Drone 2.Use the steering control to perform stunts: slowly descend and land. 1.With your drone and remote control switched on and paired, place the drone onlevel ground. «Front flip:Move steering forward 3Never give up. Move throttle forward to take off for another battle! 2Move the throttle all the way down. «Back flip:Move steering backward 3Move the steering forward and hold this position for a few seconds until the drone LEDs start to blink. «Barrel roll: Move steering right or left Replace Damaged Propellers 4.Releafs‘e the steering. The drone LEDs light steadily, indlicating successful calibration. You are now ready for 3.The droneautomatically exits stunt mode after The left and right propellers marked A/8 on the propeller. of the takeoff. performing a stunt, or push in the throttle control drone are different, and You must use the correct propeller in the +See "Trim Your Drone"to fine tune hovering and movement to further improve control of your drone after again to exit immediately. correct location. calibration. To replace a damaged propeller, remove the old one and press Dogfight! the newone onto the propeller axle. If you cannot remove the old ECC Information Battle with a friend. You will to shoot deadly infrared propeller by hand, use pliers. This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to need to fly within close range missiles. Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Each player has 3 lives per challenge. First droneto lose A interferencein a residential installation. This equipment generates, uses, and can radiate radio frequency all 3 lives goes down! energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: «Reorient or relocate the receiving antenna. «Increase the separation between the equipment and receiver. «Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. «Consult the dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your equipment. Changes or IR sensor modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept \_ Maximum any interference received, including interference that may cause undesired operation. \_ 8 distance 16 ft (Sm) A x n A WARNING: «To avoid injury and damage, check the propellers for nicks and breaks and make sure they are securely attached before and after each flight. Replace any damaged propellers. «se only the supplied propellers. Do not alter, modify, orcustomize the propellers. Troubleshooting Drone does not respond WARNING: «Make sure the drone and remote control are switched on and paired. «Avoid pairing both drones at the same time within 10 feet as this causes interference. Pair each drone with its matching remote control individually. «Drone battery maybe low. Fully charge the battery. See "Charge Made in China Version : 20180806001 the Drone." «Remote control batteries maybe low. Replace the batteries. ce x & «Make sure the drone is within the control range (65 ft) and in line of sight. «In battle mode, make sure you fly within IR range (16 ft, and level with your opponentto shoot. Stage your battles indoors to avoid strong sunlight which affects IR reception.


Document Created: 2018-10-10 18:34:21
Document Modified: 2018-10-10 18:34:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC