Modular Approval Letter

FCC ID: 2ACR3-T100

Cover Letter(s)

Download: PDF
FCCID_4351004

mmmmnqammeremes [LE ROADWAY 115 Chain Lake Dr, Halifax, Nova Scotia, B3S 1B7, Canada LIGHTING Tel: +1—877—533—5755 Web: www.ledroadwaylighting.com Date (2019—05—30) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Limited Modular Approval Request FCC ID: 2ACR3—T100 The following attestation addresses the requirements to support Limited modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the Yes, radio frequency circuitry radio frequency circuitry shielded. (except antenna) is shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly (b) The module must have buffered Yes, the module includes a modulation/data inputs to ensure that processor that communicates the device will comply with Part 15 using an API with the host. The requirements with any type of input module does not transmit data over the air. signal (c) The module must contain power Yes, the module regulates the supply regulation on the module host‘s 4.6VDC supply for internal use at 3.3VDC and below. (d) The module must contain a Yes, the module has a permanent permanently attached antenna, or integrated PCB antenna contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 165.204(c), |15.212(a), 2.920(b) _____ (e) The module must demonstrate No The device is tested with compliance in a stand—alone LED Roadway Lighting configuration host model A640 streetlight photocontroller (f) The module must be labelled with Yes, permanently affixed label. its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) (g) The module must comply with all Yes, module can only be installed specific rules applicable to the on LED Roadway Lighting Ltd. transmitter. The grantee must provide host streetlight controller which

a 4 115 Chain Lake Dr, 1 I E R ADWAY Halifax, Nova Scotia, B3S 1B7, Canada Tel: +1—877—533—5755 L I G H T I N G Web: www.ledroadwaylighting.com comprehensive instructions to explain has an appropriate installation compliance requirements manual. (h) The module must comply with RF Yes. exposure requirements Applicant is requesting limited modular approval because the module is designed to operate only with LED Roadway Lighting Ltd. streetlight monitoring and control devices and has a proprietary interface to such devices. Yours sincerely, Name: Simon Lightbody Title: Senior Design Engineer


Document Created: 2019-07-10 23:13:26
Document Modified: 2019-07-10 23:13:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC