2ACQ6-WIM

FCC ID

Equipment: 802.15.4 Radio module

Cree, Inc -WIM

4600 Silicon Dr, Durham, NC 27703 United States

Application
Frequency Range
Final Action Date
Granted
TGrpMchXkVQN1JWvSyJ0Gg==
2405.0-2480.0
2019-03-04
APPROVED
File NameDocument TypeDateDirect
RF Exposure reportRF Exposure Info 2019-03-04 00:00:00 pdf
Test ReportTest Report 2019-03-04 00:00:00 pdf
ID LabelID Label/Location Info 2019-03-04 00:00:00 pdf
Agent AuthCover Letter(s) 2019-03-04 00:00:00 pdf
Request for ConfidentialityCover Letter(s) 2019-03-04 00:00:00 pdf
request for modular approvalCover Letter(s) 2019-03-04 00:00:00 pdf
SchematicsSchematics N/A
antenna specOperational Description N/A
Block DiagramBlock Diagram N/A
Module photosExternal Photos 2019-07-01 00:00:00 N/A
antenna detailsOperational Description N/A
internal photosInternal Photos 2019-07-01 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2019-07-01 00:00:00 N/A
Product_Pic_with_LabelExternal Photos 2019-07-01 00:00:00 N/A
Operational descriptionOperational Description N/A
WIM_Installation_InstructionsUsers Manual 2019-07-01 00:00:00 N/A

Application Details:

Equipment802.15.4 Radio module
FRN0023041320
Grantee Code2ACQ6
Product Code-WIM
Applicant BusinessCree, Inc
Business Address4600 Silicon Dr , Durham,North Carolina United States 27703
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantSamir Syal – Compliance Engineering Manager
Applicant Phone
Applicant Fax262-504-5414
Applicant Email[email protected]
Applicant MailStop
Test FirmUL LLC
Test Firm ContactRick Titus
Test Firm Phone
Test Firm Fax847-313-3281
Test Firm Email[email protected]
Certified BySamir Syal –
Comment [TGrpMchXkVQN1JWvSyJ0Gg==]: Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC