Test Reportt

FCC ID: 2ACO3-17831

Test Report

Download: PDF
FCCID_4120006

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 1 of 17 TEST REPORT Application No.: SZEM1812000189CR(SGS SZ No.:T51810300010EM) Applicant: Lucky Group(H.K.) Limited Address of Applicant: Building B, Lucky Industrial Park, Hongjin Road, Hongmei Town, Dongguan, China Manufacturer: Shenzhen WUDOUMI Electronics Technology Co., Ltd Buyer: D&B Supplier: Lucky Group (H.K.) Limited Equipment Under Test (EUT): EUT Name: Wireless Charger Mouse Pad Model No.: 17831 P.O. / Ref. No.: LBD80531 Country of Origin: China Country of Destination: USA FCC ID: 2ACO3-17831 Standard(s) : 47 CFR Part 18 Date of Receipt: 2018-12-06 Date of Test: 2018-12-10 to 2018-12-21 Date of Issue: 2018-12-26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 2 of 17 Revision Record Version Chapter Date Modifier Remark 01 2018-12-26 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 3 of 17 2 Test Summary Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted 47 CFR Part 18 FCC MP-5 Part 18.307 Pass disturbance Radiated emission 47 CFR Part 18 FCC MP-5 Part 18.305 Pass

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 4 of 17 3 Contents Page COVER PAGE ...... ... .cc ce en eenenerererreverererereererereererereeererereeereeeeereereeeeereeeneereeeneeneeveeneeneene en nenne en nennnvvvenenennnn 1 2 TEST SUMMARY ....... ... . e0 0000000006 06090rererereererereerererereererere e reeere e reeeeeaereereeneeeneene en eeeenenne en nennnevvenennnnvvenene 3 3 CONTENTS. 4 GENERAL INFORMATION ......... o0 eeeremreereereeermereeermereeermereeermerereeneneereeenmeereeenmeereennnenrenrnne 5 4.1 DETAILS OF E—ULT ; .. 220 en en en en m en eere en en e en en en en en en en en en en en en en eneve en en evee en enevee en enevneeenenenee n 5 4.2 DESCRIPTION OF SUPPORT UNITS . ... ... 220. en en e en en m en en n en en en en evre en en en en en nevevee en en en en enevevennenenen n 5 4.3 MEASUREMENT UNCERTAINTY . .5 4.4 TEST LOCATION.............cl.... .6 4.5 TEST FAGILITY . c2e0 000 e en en en n en en n en en en en en n en en en en en en enevee en enevee en eneveveereveenevee en eneveenenenevennnnenene 6 4.6 DEVIATION FROM STANDARDS..........cccccceceeeee. .6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS .6 5 EQUIPMENT LIST ...... .ce eeeremreermmereeermereeermereeermereeermereeermerereenereeenmeeneereeenmeereennmeereeennnenre en 7 6 RADIO SPECTRUM MATTER TEST RESULTS .......... 00000 eeermereeenmeereeenmeeneereennmnmeenennmennennnnenne en 8 6.1 CONDUCTED DISTURBANCE 8 6.1.1 E.U.T. Operation....... ...8 6.1.2 TBSt SQUUDP DI@GTAM ............cccccvceemememereeremereenerenereenerenereeneneneneeneneneneeeeenenneneeneneneneeneneneneeneneneneme n 8 6.1.3 Measurement Procedure and Data. ...9 6.2 RADIATED EMISSION ... cesmm A2 6.2.1 E.U.T. ODBTBIION ........cccvceememereemererereenerenemeenerenereenereneneeneneneneeneneneneneenenenneneeneneneneeneneneneenenenen en 13 6.2.2 Test Setup Diagram ... 13 6.2.3 Measurement Procedure and Data. .14 7 PHOTOGRAPHS........ ... omm eeemmmeermmereemereeemereeemereeermereeermerereeermeeeenmeeneereeenmeereennneereennnenrnnee 17 7.1 ces S e 17 7.2 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS)......... cesmm en en en en n m en n eneerenenenene en en en 17 Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:/Jwwn.ags.com/en/Terms—and—Gonditonsaspx and. for electronic format documents, subject to Terms and Conditions for Electronic Documents at hitp:Jwwn.sgs.comen/Te —Conditions/Terms—s—Document.aspx: Attention is drawn to the limitation of iabilit, indmmnification y eavee defred herom. any ofoor of ts document is advised that information contained hereon reflects the Company‘s findings at the time of ts intervention only and within the !imits of Clients instructions, if any. The Company‘s sole responsibiity is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shoun in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at mephane (s6—758) s307 1443, or email: CN.Doccheck@sgs.com No.t WortshopN10dSecton,Scence & Technology PartShenzhen, China 518057 t (86—758) 26012053 1 (%6—750) 26710504 wimsgsgroup.com.en Shonwhen Bontwe Bre C aboslor: #B —2H— ARRIHENV—108—S1 B #B4: steosy t (86—755)26012053 f (86—755) 26710504 suschina@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 5 of 17 4 General Information 4.1 Details of E.U.T. Power supply: Input: DC5V/2A 9V/1.67A Output: DC 5V/1A 9V/1A Cable: USB cable:95cm unshielded Antenna Type: Loop Antenna Modulation Type: Load Modulation Operation Frequency: 111.54kHz to 180.77kHz 4.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter Apple A1357 W010A051 REF. No.SEA0500 Mobile phone SAMSUNG SM-G9500 R28J9140LPB 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ± 7.25 x 10-8 2 Duty cycle ± 0.37% 3 Occupied Bandwidth ± 3% 4 RF conducted power ± 0.75dB 5 RF power density ± 2.84dB 6 Conducted Spurious emissions ± 0.75dB ± 4.5dB (below 1GHz) 7 RF Radiated power ± 4.8dB (above 1GHz) ± 4.5dB (Below 1GHz) 8 Radiated Spurious emission test ± 4.8dB (Above 1GHz) 9 Temperature test ± 1°C 10 Humidity test ± 3% 11 Supply voltages ± 1.5% 12 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 6 of 17 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 7 of 17 5 Equipment List Conducted disturbance Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room ChangZhou ZhongYu GB-88 SEM001-06 2017-05-10 2020-05-09 Measurement Software AUDIX e3 V5.4.1221d N/A N/A N/A Coaxial Cable SGS N/A SEM024-01 2018-07-12 2019-07-11 LISN Rohde & Schwarz ENV216 SEM007-01 2018-09-25 2019-09-24 LISN ETS-LINDGREN 3816/2 SEM007-02 2018-04-02 2019-04-01 EMI Test Receiver Rohde & Schwarz ESCI SEM004-02 2018-04-02 2019-04-01 Radiated emission Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2018-07-12 2019-07-11 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2018-04-02 2019-04-01 (9kHz-7GHz) Trilog-Broadband Antenna Schwarzbeck VULB9168 SEM003-18 2016-06-29 2019-06-28 (30MHz-1GHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2018-04-13 2019-04-12 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2018-04-08 2019-04-07 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 8 of 17 6 Radio Spectrum Matter Test Results 6.1 Conducted disturbance Test Requirement Part 18.307 Test Method: FCC MP-5 Limit: 6.1.1 E.U.T. Operation Operating Environment: Temperature: 22.6 °C Humidity: 49.6 % RH Atmospheric Pressure: 1020 mbar Test mode a: Normal Working mode,keep charging with mobile phone in low battery b: Normal Working mode,keep charging with mobile phone in intermediate battery c: Normal Working mode,keep charging with mobile phone in full battery d: Normal Working mode,keep EUT working with full load. e: Normal Working mode,keep EUT working with half load f: Normal Working mode,keep EUT working with no load Test Worse case a: Normal Working mode,keep charging with mobile phone in low battery 6.1.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 9 of 17 6.1.3 Measurement Procedure and Data Test Procedure: 1) The mains terminal disturbance voltage test was conducted in a shielded room. 2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization Network) which provides a 50Ω/50µH + 5Ω linear impedance. The power cables of all other units of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect multiple power cables to a single LISN provided the rating of the LISN was not exceeded. 3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane. And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane, 4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m from the vertical ground reference plane. The vertical ground reference plane was bonded to the horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and associated equipment was at least 0.8 m from the LISN 2. 5) In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed on conducted measurement.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 10 of 17 Mode:a; Line:Live Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 11 of 17 Mode:a; Line:Neutral Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 12 of 17 6.2 Radiated emission Test Requirement Part 18.305 Test Method: FCC MP-5 Measurement Distance: 3m Limit: 1Fieldstrength may not exceed 10 µV/m at 1600 meters. Consumer equipment operating below 1000 MHz is not permitted the increase in field strength otherwise permitted here for power over 500 watts. 2Reduced to the greatest extent possible. 3Field strength may not exceed 10 µV/m at 1600 meters. Consumer equipment is not permitted the increase in field strength otherwise permitted here for over 500 watts. 4Induction cooking ranges manufactured prior to February 1, 1980, shall be subject to the field strength limits for miscellaneous ISM equipment.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 13 of 17 6.2.1 E.U.T. Operation Operating Environment: Temperature: 25 °C Humidity: 51 % RH Atmospheric Pressure: 1020 mbar Test mode a: Normal Working mode,keep charging with mobile phone in low battery b: Normal Working mode,keep charging with mobile phone in intermediate battery c: Normal Working mode,keep charging with mobile phone in full battery d: Normal Working mode,keep EUT working with full load. e: Normal Working mode,keep EUT working with half load f: Normal Working mode,keep EUT working with no load Test Worse case a: Normal Working mode,keep charging with mobile phone in low battery 6.2.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 14 of 17 6.2.3 Measurement Procedure and Data Test Procedure: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber(30MHz-1000MHz) and 3 meter semi-anechoic chamber(9kHz-30MHz). The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters(30MHz-1000MHz) and 10 meter (9kHz-30MHz) away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Above 30MHz: The Analyzer/Receiver scanned from 30MHz to 1000MHz.The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. Below 30MHz: The Analyzer/Receiver scanned from 9kHz to 30MHz.The antenna height is 2 meters above the ground to determine the maximum value of the field strength. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 2 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Repeat above procedures until all frequencies measured was complete. i. Measurement Requirement: 1)This product belongs to non-ISM equipment, the field strength limit is 15uV/m at 300 meter distance. 2)Limit: 20log(15uV/m) +20log (300/3) =23.52+40=63.52dBuV/m at 3 meters distance

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 15 of 17 Mode a: 9kHz-150kHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 16 of 17 Mode a: 150kHz-30MHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181200018901 Page: 17 of 17 7 Photographs 7.1 Test Setup Please refer to setup photos. 7.2 EUT Constructional Details (EUT Photos) Please refer to external and internal photos for details. - End of the Report -


Document Created: 2018-12-27 07:10:52
Document Modified: 2018-12-27 07:10:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC