test report

FCC ID: 2ACN7-HW706V

Test Report

Download: PDF
FCCID_4185939

I7] Model: HW7O6V FCC Part 15C Measurement and Test Report For Shenzhen Fitcare Electronics Co.,Ltd 6th floor(south), Building A, Dingxin Science Park, Honglang North 2nd Road, Bao‘an, Shenzhen, China FCC ID: 2ACNT7—HW7O6V FCC Rule(s): ECC Parl 15.247 Product Description: Heart rate armband Tested Model: HW7OBV Report No.: WTX19X01007008W—1 Sample Receipt Date: 2019—01—30 Tested Date: 2019—01—31 to 2019—02—20 Issued Date: 2019—02—20 . 4 Tested By: Jason Su / Engineer (n As f Chan Reviewed By: Silin Ghen / EMC Manager " 9 Approved & Authorized By: Jandy So / PSQ Manager J”’(ZW Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33663808 Fax.: +86—755—33008309 Website: www.semfest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ld. Report No.: WTXI9X01007008W—I1 Page I of 34 FCC Part 15.247

Model: HW706V TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND TEST MODE .................................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. RF EXPOSURE .........................................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 TEST RESULT..........................................................................................................................................................8 4. ANTENNA REQUIREMENT ..................................................................................................................................9 4.1 STANDARD APPLICABLE.........................................................................................................................................9 4.2 EVALUATION INFORMATION ..................................................................................................................................9 5. POWER SPECTRAL DENSITY ...........................................................................................................................10 5.1 STANDARD APPLICABLE.......................................................................................................................................10 5.2 TEST PROCEDURE .................................................................................................................................................10 5.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................10 6. DTS BANDWIDTH .................................................................................................................................................12 6.1 STANDARD APPLICABLE.......................................................................................................................................12 6.2 TEST PROCEDURE .................................................................................................................................................12 6.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................12 7. RF OUTPUT POWER ............................................................................................................................................14 7.1 STANDARD APPLICABLE.......................................................................................................................................14 7.2 TEST PROCEDURE .................................................................................................................................................14 7.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................14 8. FIELD STRENGTH OF SPURIOUS EMISSIONS .............................................................................................16 8.1 STANDARD APPLICABLE.......................................................................................................................................16 8.2 TEST PROCEDURE .................................................................................................................................................16 8.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................17 8.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................17 9. OUT OF BAND EMISSIONS .................................................................................................................................25 9.1 STANDARD APPLICABLE.......................................................................................................................................25 9.2 TEST PROCEDURE .................................................................................................................................................25 9.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................26 10. CONDUCTED EMISSIONS ................................................................................................................................32 10.1 TEST PROCEDURE ...............................................................................................................................................32 10.2 BASIC TEST SETUP BLOCK DIAGRAM .................................................................................................................32 10.3 TEST RECEIVER SETUP .......................................................................................................................................32 10.4 SUMMARY OF TEST RESULTS/PLOTS ..................................................................................................................32 Report No.: WTX19X01007008W-1 Page 2 of 34 FCC Part 15.247

Model: HW706V 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: Shenzhen Fitcare Electronics Co.,Ltd Address of applicant: 6th floor(south), Building A, Dingxin Science Park, Honglang North 2nd Road, Bao'an, Shenzhen, China Manufacturer: Shenzhen Fitcare Electronics Co.,Ltd Address of manufacturer: 6th floor(south), Building A, Dingxin Science Park, Honglang North 2nd Road, Bao'an, Shenzhen, China General Description of EUT Product Name: Heart rate armband Brand Name: / Model No.: HW706V Adding Model(s): / Rated Voltage: DC 3.7V Battery Battery Capacity: 90mAh Power Adapter: / Software Version: V3.0 Hardware Version: V1.5 Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Bluetooth Version: V4.0 (BLE mode) Frequency Range: 2402-2480MHz RF Output Power: -3.036dBm (Conducted) Data Rate: 1Mbps Modulation: GFSK Quantity of Channels: 40 Channel Separation: 2MHz Type of Antenna: Chip Antenna Antenna Gain: 0.5dBi Lowest Internal Frequency of EUT: 32.768kHz Report No.: WTX19X01007008W-1 Page 3 of 34 FCC Part 15.247

Model: HW706V 1.2 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. 558074 D01 15.247 Meas Guidance v05: Guidance For Compliance Measurements On Digital Transmission System, Frequency Hopping Spread Spectrum System, And Hybrid System Devices Operating Under Section 15.247 Of The Fcc Rules ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, KDB 558074 D01 15.247 Meas Guidance v05 The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC – Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: WTX19X01007008W-1 Page 4 of 34 FCC Part 15.247

Medaurturroey 1.5 EUT Setup and Test Mode "The EUT was aperated in the engineering mode tofr the n frequency that was for the purpose of the measarements Alltesingshallbe peformed under maxmum output pover condition, wilh a dity eycle equal to 100%,and to measure ts highest possible ermissions evel, more dexied desrition asfollows: ‘Test Mod Lt Testitode Desripion mm Low Tz wicate Ts rign ‘Test Condition Tempersiwe: Relsive huriaiy ATM Prsswe: ET Cable List and Detai Cable Deseripion Length (m) ShieldedUnstielded Wat / WihoutFerrite use Cale ass Unshicided WihoutFere Accessoris Cable Lit and Peiaile Cable Deseripton Length (m) ShieldedUnstieided Witn / WihoutFevite 7 7 7 7 Auiliary Equipment List and Details Descripion Manufactrer Model Serial Number Adapier Hvumoa imccsoo 7 1.6 Measurement Uncertainty Measurement unceriainty Pasmater Condions Uncersiy RF OulpatPover Conduceed soas Occupied Bendwidih Conduceed iss Pover Specirl Densily Conduces uzo Condicied Sporivus Emission Conduceed seue 5500 437ea9 Conducked Emisions Conduceed onsons £3309 3o—zo0ue +45za0 02—iGhe +5 569 Transriter Spurious Emisions Ratined Logks +3 sa9 srom +xwan Reyou No: wixroxoromroon 1 Fagcsors: Tecrn bar

Model: HW706V 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due Date Spectrum SEMT-1072 Agilent E4407B MY41440400 2018-05-22 2019-05-21 Analyzer Spectrum Rohde & SEMT-1031 FSP30 836079/035 2018-05-22 2019-05-21 Analyzer Schwarz EMI Test Rohde & SEMT-1007 ESVB 825471/005 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1008 Amplifier Agilent 8447F 3113A06717 2018-05-22 2019-05-21 SEMT-1043 Amplifier C&D PAP-1G18 2002 2018-05-22 2019-05-21 Broadband SEMT-1011 Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 Antenna SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 9773 2017-06-08 2020-06-07 EMI Test Rohde & SEMT-1001 ESPI 101611 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1003 L.I.S.N Schwarz beck NSLK8126 8126-224 2018-05-22 2019-05-21 Rohde & SEMT-1002 Pulse Limiter ESH3-Z2 100911 2018-05-22 2019-05-21 Schwarz Direction SEMT-1168 Pre-amplifier PAP-0126 14141-12838 2018-05-22 2019-05-21 Systems Inc. Direction SEMT-1169 Pre-amplifier PAP-2640 14145-14153 2018-05-22 2019-05-21 Systems Inc. Spectrum Rohde & SEMT-1163 FSP40 100612 2018-05-22 2019-05-21 Analyzer Schwarz DRG Horn A.H. SEMT-1170 SAS-574 571 2018-03-19 2021-03-18 Antenna SYSTEMS SEMT-1166 Power Limiter Agilent N9356B MY45450376 2018-05-22 2019-05-21 SEMT-1048 RF Limiter ATTEN AT-BSF-2400~2500 / 2018-05-22 2019-05-21 SEMT-1076 RF Switcher Top Precision RCS03-A2 / 2018-05-22 2019-05-21 SEMT-C001 Cable Zheng DI LL142-07-07-10M(A) / 2018-03-19 2019-03-18 SEMT-C002 Cable Zheng DI ZT40-2.92J-2.92J-6M / 2018-03-19 2019-03-18 SEMT-C003 Cable Zheng DI ZT40-2.92J-2.92J-2.5M / 2018-03-19 2019-03-18 SEMT-C004 Cable Zheng DI 2M0RFC / 2018-03-19 2019-03-18 SEMT-C005 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 SEMT-C006 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 Report No.: WTX19X01007008W-1 Page 6 of 34 FCC Part 15.247

Medaurturroey 2. SUMMARY OF TEST RESULTS FCC Rutes Description of Tst Hem Restt 321003 RF Exposure Conplian. $ m:foarman Anterns Requirement Conplian. 315205 Resticted Band of Operation Conplian. Eis zo Condicted Emission Conplian. tsz Power Speciral Densiy Conplian. insrm® D7S Burdvidh Conplian. inzmm®) RFOuipes Pover Complian: fusmm Racited Emisson Conplian. Eis2it Bond Edge Outof Band Emissions) Conplian. Nh not appleable Reyou No: wixroxoromroon 1 Fagerors Tecrn bar

Medaurturroey 3. RF Exposure 3.1 Standard Applicable Accorting to § 1.1307 and. §2.1093,theportsle brinsmiter mustcomply the RFexposure requirements 32 Test Result "This prodict compled withtherequirementof the RF exsosure, leasesee the RE Exposure Report Reyou No: wixroxoromroon 1 Fagcsors: Tecrn bar

Model: HW706V 4. Antenna Requirement 4.1 Standard Applicable According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 4.2 Evaluation Information This product has a chip antenna, fulfill the requirement of this section. Report No.: WTX19X01007008W-1 Page 9 of 34 FCC Part 15.247

Medaurturroey 5. Power Spectral Density 5.1 Standard Applicable Accortingto 15247(2)(D(i), Fordigtally modulted ystems, the power specialdensily conducied from the intertional rdistr to the antennsshallnobe greserthin 8 dBm in any 3 Kite band during any time itervaof continuoss ransmision 52 Test Procedure Accortingto the KDB 553074 DO1 v05 Subcluse 84 and ANS1 C63.10—2013 Subclause L1.102, the tes imethod ol power spectrl density as below a) Set analyzercenter requencyto DTS channel center fequency b) Sethe span to 15 imes the DTS bandvcth o) SettheRBW io: 3itte © RBW < 100kt asenevw > 3 x ow ®) Detector=pesk 6 Sweeptime =autocouple 2)Trace mode = max hok 1) Allow raceto fullystabilie 3 Use the peakmarkefction o determine the maximum amoftude fevel wiin the RBW 3) If measired valueexcerds mt reduce RBW (no fes than 3 kHs) and repeat 53 Summmary of Test Results/Plots TestMoce TeChanel PoverSpectalDersiy aniton tow 4sos L GBKBL® midle Aoa8 8 High iz s Hease refertothfllowing test plots Reyou No: wixroxoromroon 1 Fage 1oorss Tecra B2

Model: HW706V Low Middle High Report No.: WTX19X01007008W-1 Page 11 of 34 FCC Part 15.247

Medaurturroey 5. DTS Bandwidth 6.1 Standard Applicable Accorting to 15247(a)(2) Systems usingdigial modllon echrigques may aperate in he $02—928 MHe,2400~ 24835 Mi, and 5725—5850 MHe bands. Thminimum 6B bandwicth shallb aeast 500 kite 62 Test Procedure Accorting to the KDB 588074 DOL vOS Subcluse 8.2 and ANSI C63.102013 Subelause I1.8. L thets method of DT3 Burdvidth asbelows 9 SecRBiy = 100 ie b)Setthevideo banduidih (VBW) > 3 x RBW ©) Drtector= Pesk 4)Trsce mode = mas hold ©) Sweep = sito couple 6 Allow the tnce to siiliee ) Measare the maximum width of temissionthati consrined bythe frequenclesassocited withthe o outermostamplitude point(upper and loverfrequencles) thatae atlnuated by 6 dB refaliveto the manimum levelmeasaredinthe fundamentaemission 6.3 Summmary of Test Results/Plots Test Mode Test Chanrel 6 4B Bandwian Un ie ie tow sarore zsoo crskace) Miscle wasce zsoo High seasu zsoo Hease refertothfllowing test plots Reyou No: wixroxoromroon 1 Fagerrore Tecra B2

Model: HW706V Low Middle High Report No.: WTX19X01007008W-1 Page 13 of 34 FCC Part 15.247

Medaurturroey 7. RF Output Power 7.1 Standard Applicable Accorting io 15.247(0(3) For systems using d tal medulation in he 902—928 MHs, 2400—2483.5 MHe, and 5725—5830 Mz bands: 1 Wai. 7.2TestProcedure Accorting to h KDB—532074 DO1 v05 Subelause 8.3.1. and ANS1 C63,10—2013 Subelause I1.9.L. . his procedire shall be used when he messurementinstumert hs availible a resoliionbandwicth that is grester than the ETS bandvicth a Serthe RBW 2 DTS bandwith bSevew = 3 x Rew €) Setspmn > 3x RBW 4) Sweeptime= auto couple: ) Detector= peal 9 Tesce mode= mhold 2)Allowirace to fily subilice 1 Use pelc madker functionto detemine the peanpliude level 7.3 Summmary of Test Results/Plots HTest Mode TestChael Resting Ouiput Power Link aBm mw mw Low so5 oast toco crsceue) Misdle Sose oaso toco High Em oaso toco Reyou No: wixroxoromroon 1 Fage e ore Tecra B2

Model: HW706V Low Middle High Report No.: WTX19X01007008W-1 Page 15 of 34 FCC Part 15.247

Model: HW706V 8. Field Strength of Spurious Emissions 8.1 Standard Applicable According to §15.247(d), in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a). The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency. 8.2 Test Procedure The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.205 15.247(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Report No.: WTX19X01007008W-1 Page 16 of 34 FCC Part 15.247

Model: HW706V Antenna Tower 1m-4m 3m EUT SYS 1.5m Turntable Table To EMI Receiver Ground Plane Frequency :9kHz-30MHz Frequency :30MHz-1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VBW=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV 8.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15 Limit 8.4 Summary of Test Results/Plots Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Report No.: WTX19X01007008W-1 Page 17 of 34 FCC Part 15.247

Model: HW706V  Spurious Emissions Below 1GHz Test Channel Low Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 39.0245 35.43 -8.66 26.77 40.00 -13.23 262 100 peak 2 96.0986 34.23 -15.07 19.16 43.50 -24.34 310 100 peak 3 185.7882 34.41 -14.49 19.92 43.50 -23.58 92 100 peak 4 318.8170 31.94 -8.91 23.03 46.00 -22.97 164 100 peak Report No.: WTX19X01007008W-1 Page 18 of 34 FCC Part 15.247

Model: HW706V Test Channel Low Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 46.1780 35.92 -8.08 27.84 40.00 -12.16 159 100 peak 2 161.4742 44.28 -16.71 27.57 43.50 -15.93 104 100 peak 3 178.1327 43.06 -15.31 27.75 43.50 -15.75 133 100 peak 4 334.8589 31.68 -8.29 23.39 46.00 -22.61 269 100 peak Report No.: WTX19X01007008W-1 Page 19 of 34 FCC Part 15.247

Model: HW706V Test Channel Middle Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 44.5868 33.22 -8.03 25.19 40.00 -14.81 262 100 peak 2 109.4116 32.34 -14.43 17.91 43.50 -25.59 194 100 peak 3 184.4898 33.47 -14.61 18.86 43.50 -24.64 57 100 peak 4 314.3765 32.35 -8.99 23.36 46.00 -22.64 119 100 peak Report No.: WTX19X01007008W-1 Page 20 of 34 FCC Part 15.247

Model: HW706V Test Channel Middle Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 37.6798 35.24 -8.87 26.37 40.00 -13.63 227 100 peak 2 50.5860 35.18 -8.55 26.63 40.00 -13.37 164 100 peak 3 231.7179 33.72 -11.97 21.75 46.00 -24.25 84 100 peak 4 333.6867 31.33 -8.32 23.01 46.00 -22.99 102 100 peak Report No.: WTX19X01007008W-1 Page 21 of 34 FCC Part 15.247

Model: HW706V Test Channel High Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 46.1780 33.55 -8.08 25.47 40.00 -14.53 87 100 peak 2 110.5687 32.91 -14.51 18.40 43.50 -25.10 137 100 peak 3 179.3864 33.86 -15.19 18.67 43.50 -24.83 72 100 peak 4 252.0627 33.35 -11.20 22.15 46.00 -23.85 287 100 peak Report No.: WTX19X01007008W-1 Page 22 of 34 FCC Part 15.247

Model: HW706V Test Channel High Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 44.5868 33.56 -8.03 25.53 40.00 -14.47 277 100 peak 2 107.8877 35.02 -14.46 20.56 43.50 -22.94 90 100 peak 3 174.4241 39.45 -15.69 23.76 43.50 -19.74 195 100 peak 4 381.2487 31.31 -7.77 23.54 46.00 -22.46 118 100 peak Report No.: WTX19X01007008W-1 Page 23 of 34 FCC Part 15.247

Model: HW706V  Spurious Emissions Above 1GHz Frequency Reading Correct Result Limit Margin Polar Detector (MHz) (dBuV/m) dB (dBuV/m) (dBuV/m) (dB) H/V Low Channel-2402MHz 4804 60.94 -3.59 57.35 74 -16.65 H PK 4804 40.62 -3.59 37.03 54 -16.97 H AV 7206 58.56 -0.52 58.04 74 -15.96 H PK 7206 38.73 -0.52 38.21 54 -15.79 H AV 4804 58.04 -3.59 54.45 74 -19.55 V PK 4804 39.42 -3.59 35.83 54 -18.17 V AV 7206 59.98 -0.52 59.46 74 -14.54 V PK 7206 39.77 -0.52 39.25 54 -14.75 V AV Middle Channel-2440MHz 4880 61.99 -3.49 58.5 74 -15.5 H PK 4880 38.41 -3.49 34.92 54 -19.08 H AV 7320 58.52 -0.47 58.05 74 -15.95 H PK 7320 41.34 -0.47 40.87 54 -13.13 H AV 4880 61.54 -3.49 58.05 74 -15.95 V PK 4880 38.91 -3.49 35.42 54 -18.58 V AV 7320 59.76 -0.47 59.29 74 -14.71 V PK 7320 39.89 -0.47 39.42 54 -14.58 V AV High Channel-2480MHz 4960 61.93 -3.41 58.52 74 -15.48 H PK 4960 39.9 -3.41 36.49 54 -17.51 H AV 7440 59.35 -0.42 58.93 74 -15.07 H PK 7440 39.52 -0.42 39.1 54 -14.9 H AV 4960 60.04 -3.41 56.63 74 -17.37 V PK 4960 39.72 -3.41 36.31 54 -17.69 V AV 7440 60.65 -0.42 60.23 74 -13.77 V PK 7440 40.24 -0.42 39.82 54 -14.18 V AV Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. Report No.: WTX19X01007008W-1 Page 24 of 34 FCC Part 15.247

Medaurturroey 9. Out of Band Emissions 9.1 Standard Applicable Accorting to $15.247 (0) In any 100 kbandiweloutsite thfrequency band in which thespread spectrum or ighally modlated intentonal catoris operting, h radiofrequency power that s produced by theinentional rntisrshllbea feast20 B below thatin the 100 kHe bandvidth within the band thaconiins h highesfeve of the desired power,based on ellhean RF conducled ora radinted messurement, provide the transmiter demonsiniescomplance withthe pesk condacted power itsIfthetrnsriter complies withtheconducted powerliits based on theuse of RMS averuging ove tminterva,as peritie under paragraph (BX2)of this section, e atlenuation reauired under his nragranh shallbe 0 B instead of 20 dB. Atlnuation below t penerais specific in §15.209(0) is norequred. I additin,radinted erissions which fall in theresicted bands,as defined in $15.205(s)must alsocomply with the radnted ermission imitsspecified in 315.2000) 9.2Test Procedure Accorting to the KDB 532074001 v05 Subelause 8. and ANST C3.10—2013 Subelause [L.LL, he Emissions in nonrestited requency bandstest method as llows a) Sthe center requency and span toencompassfrequency rangeto be measired b)Sethe RBW = 100 ktte o SetevBw ep x Row 4) Detetor= peok ) Sweep im = auto couple D Trace mod= mas hokd ) Allow recetofilysiabilize 1) Use th peak marker fiction o determine the maximum ampltuce evel Accorting to the KDB 558074 DOL vO5 Subelause8.5 and ANST C63.10—2013 Subelause I1.12,the Emissions in resiriced requency bandstest method as llows A. Radited emision measurements Setspan = wite enough tocaptur the peak levelof he eniscion aperating on the channel closettothe sandedge, as wellas any modlation productswhichfall outsideof heauthoried band of opertion (2310MHe o 24200z forlow bandedige 2480MHteto 2500M t fohe high bandedge) RBW = LitHe, VBW = TbiHe for pek value measared raw — wins, vew Ob for averige value measured Sueep = tio; Detecior furetion =pesidaverige; Trsce= max hold All the brceto siabiiz, sethe matker on theerission ; the bandedge, oron the highest modltion product ouisideothe band. if is level is greaterthan that atthe bandedge. Enable the markendelis nction, hen se the markerto peak function o mave the matkerto thepeak ohe in—band emision.Those emission must comply wity h 15208 imo fllinthe restieted bands isxed in section 15.205, Note thathe method of messurement KDB publcstionnumber: 913391 may b used forthe edixied bandedge measurements Reyou No: wixroxoromroon 1 Fageasors Tecra B2

15. Mede: rwrroey B.. Anternscpor condicted messurments Peakervissionlevelsare measared by seting thnstnimentasfolows: 3) RBW as specified in Tabl 9/ svew > s x rew ©) Drtector= peak 4) Sweep ime auo ) Trice mode = max hold 0 Allow sueeps to cortinue until the trice stabfizes. (Note that the required measurement lime may be lengthened folow—duty:ezcle applications) Table 9—RBW as a function offrequency Freueney rew pie i ioone zonto snR 0 15 Miicto 30Mz Sigte is 1oigle Somee w ooo Mite Toiz to Toie >roo e Ihte If the pesicdetected ampltude can b shown to comply wth the average imit, hen t is not necessary io perform a separie average messurement Ensure that the amplitude of all unvanted emissions outside of the auirorized freguency band (excluding resbictc fequency bands)areatenuated by atleastthrinimurm requirement specified n section 8.1. Report thetiree highesemissionrelsive to thfinit 9.3 Summary of Test Results/Plots Teyou No: wicioxoroomon 1 Fagcrcors Tecransar

Model: HW706V  Radiated test Test Channel Low Polarity: Horizontal(worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) 1 2310.000 40.99 -7.78 33.21 54.00 -20.79 Average Detector 2310.000 53.75 -7.78 45.97 74.00 -28.03 Peak Detector 2 2390.000 40.99 -7.32 33.67 54.00 -20.33 Average Detector 2390.000 55.59 -7.32 48.27 74.00 -25.73 Peak Detector 3 2401.843 80.79 -7.25 73.54 / / Average Detector 2402.148 94.33 -7.25 87.08 / / Peak Detector Report No.: WTX19X01007008W-1 Page 27 of 34 FCC Part 15.247

Model: HW706V Test Channel High Polarity: Horizontal(worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2479.955 86.31 -6.79 79.52 / / Average Detector 2479.930 99.71 -6.79 92.92 / / Peak Detector 2 2483.500 47.80 -6.77 41.03 54.00 -12.97 Average Detector 2483.500 65.48 -6.77 58.71 74.00 -15.29 Peak Detector 3 2500.000 39.86 -6.67 33.19 54.00 -20.81 Average Detector 2500.000 51.35 -6.67 44.68 74.00 -29.32 Peak Detector Report No.: WTX19X01007008W-1 Page 28 of 34 FCC Part 15.247

Model: HW706V  Conducted test Low Report No.: WTX19X01007008W-1 Page 29 of 34 FCC Part 15.247

Model: HW706V Middle Report No.: WTX19X01007008W-1 Page 30 of 34 FCC Part 15.247

Model: HW706V High Report No.: WTX19X01007008W-1 Page 31 of 34 FCC Part 15.247

Model: HW706V 10. Conducted Emissions 10.1 Test Procedure The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 15.207 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. 10.2 Basic Test Setup Block Diagram Adapter EUT LISN 1.0 m 1.5 To Receiver Non-conduction table 80 cm above Ground Plane 1. 5 m 10.3 Test Receiver Setup During the conducted emission test, the test receiver was set with the following configurations: Start Frequency .......................................................................... 150 kHz Stop Frequency .......................................................................... 30 MHz Sweep Speed .............................................................................. Auto IF Bandwidth.............................................................................. 10 kHz Quasi-Peak Adapter Bandwidth ................................................. 9 kHz Quasi-Peak Adapter Mode ......................................................... Normal 10.4 Summary of Test Results/Plots Report No.: WTX19X01007008W-1 Page 32 of 34 FCC Part 15.247

Model: HW706V Test Mode Communication AC120V 60Hz Polarity: Neutral No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1 0.1660 17.82 10.11 27.93 55.16 -27.23 AVG 2* 0.1900 29.50 10.12 39.62 64.04 -24.42 QP 3 1.5340 19.44 10.55 29.99 56.00 -26.01 QP 4 1.6420 8.76 10.57 19.33 46.00 -26.67 AVG 5 12.0060 -1.45 10.98 9.53 50.00 -40.47 AVG 6 13.7500 10.37 11.01 21.38 60.00 -38.62 QP Report No.: WTX19X01007008W-1 Page 33 of 34 FCC Part 15.247

Model: HW706V Test Mode Communication AC120V 60Hz Polarity: Line No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1* 0.1660 32.09 10.11 42.20 65.15 -22.95 QP 2 0.1700 18.84 10.11 28.95 54.96 -26.01 AVG 3 1.4098 10.05 10.55 20.60 46.00 -25.40 AVG 4 1.4178 20.90 10.55 31.45 56.00 -24.55 QP 5 13.8178 9.06 11.01 20.07 60.00 -39.93 QP 6 15.2939 -1.64 11.04 9.40 50.00 -40.60 AVG ***** END OF REPORT ***** Report No.: WTX19X01007008W-1 Page 34 of 34 FCC Part 15.247


Document Created: 2019-02-28 16:33:04
Document Modified: 2019-02-28 16:33:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC